Lingenfelter Performance Engineering Customers - Page 151 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2010 BADSS · 01-06-2010, 11:49 PM

[QUOTE=paul2010;1355283]

Quote:

Originally Posted by 2010 BADSS

I probably would (might anyway idn) but I need the Duramax to take me to Florida after the Fest and then back home.

You Rock Paul! If there's anyway for us to go, I'd love to see that! I talked to Kevin yesterday, and my ride is pretty much done.

Now they are just fine tuning her. I'll be burning rubber soon.

Blue70SS · 01-07-2010, 10:46 AM

[QUOTE=2010 BADSS;1355829]

Quote:

Originally Posted by paul2010

You Rock Paul! If there's anyway for us to go, I'd love to see that! I talked to Kevin yesterday, and my ride is pretty much done.

Now they are just fine tuning her. I'll be burning rubber soon.

Congrats!

Any word on your transport date?

600hp-lpe · 01-07-2010, 10:55 AM

anyone want to buy a set of BMR trailing arms?

I have a set - Brand new - never been installed. Red powder coat with Grease fittings.
Figured I'd offer them to my LPE brethren first.. Send me a PM if interested.

Blue70SS · 01-07-2010, 12:43 PM

FYI: I noticed a few of you doing the stainless brake lines. Be carefull threading them together. MTCWBY's went on fine, but 1 of mine tried to cross thread and the last one I had to rethread the factory male coupling nut (reinstalled old one temporarily). Wasn't a problem with stainless line, but more like factory build problem. When removing the old brake line it started fine, then got real tough towards end of removal and flattened threads

- so had to purchase a die set with 10mm 1.00 threads. PM me if you need more info.

600hp-lpe · 01-07-2010, 05:36 PM

Quote:

Originally Posted by 2010 BADSS

You Rock Paul! If there's anyway for us to go, I'd love to see that! I talked to Kevin yesterday, and my ride is pretty much done.

Now they are just fine tuning her. I'll be burning rubber soon.

Hi 2010, did you get a Dyno sheet yet? Just Curious how many MORE ponies you have than RS!

Should be interesting to see how the Rear end gearset changes things....

It's a good feeling knowing your's comes home soon!

mws444 · 01-07-2010, 08:30 PM

[QUOTE=2010 BADSS;1355829]

Quote:

Originally Posted by paul2010

You Rock Paul! If there's anyway for us to go, I'd love to see that! I talked to Kevin yesterday, and my ride is pretty much done.

Now they are just fine tuning her. I'll be burning rubber soon.

WoooHoooo!! I cant wait to see the dyno on that baby!

mws444 · 01-07-2010, 08:34 PM

Hey Paul your ready yet? I just have to see the final product. Remember you can PM that dyno.

2010 BADSS · 01-07-2010, 10:16 PM

Blue, No transport date yet. Don't worry, everything is all set up, but they are still doing the fine tuning and then the dyno. I know the weather has not been so cooperative, but it will be done soon!

570, I'll be sure to post the dyno as soon as it comes in, especially if it's higher than RS's

Transformation almost complete!

MWS, is there anything I can do for the right foot twitch (besides driving RS's car) ? There's too much salt on the road.

2010 BADSS · 01-07-2010, 10:19 PM

Quote:

Originally Posted by mws444

Hey Paul your ready yet? I just have to see the final product. Remember you can PM that dyno.

Us too Paul

paul2010 · 01-07-2010, 11:15 PM

Quote:

Originally Posted by 2010 BADSS

Us too Paul

2010 It sounds like they are moving right along with you car thats awesome!! I can't wait to see how your numbers look.

We are still a little ways out yet. They keep coming out with more things to add to my build. The latest is the Twin fuel pump kit. I think we may need a little extra fuel to feed her! She will be very very thirsty!

600hp-lpe · 01-08-2010, 09:31 AM

Quote:

Originally Posted by paul2010

2010 It sounds like they are moving right along with you car thats awesome!! I can't wait to see how your numbers look.

We are still a little ways out yet. They keep coming out with more things to add to my build. The latest is the Twin fuel pump kit. I think we may need a little extra fuel to feed her! She will be very very thirsty!

Paul, At some point you gotta get your car out of there! LOL J/K

Glad I'm not getting THAT bill.. Mine was high enough.

Speed74SS · 01-08-2010, 09:33 AM

I can't wait to see some dyno's and pictures!!

RS-SS2 · 01-08-2010, 10:34 AM

Quote:

Originally Posted by Speed74SS

I can't wait to see some dyno's and pictures!!

Me too!!!!

Windy City · 01-08-2010, 06:44 PM

Hi Brothers and Sisters!

Weather sucks here, and most of the country from what I'm hearing!
Chicagoland boat show next week! I think it's time to look at a go-fast boat!

FYI, Racing Brake is looking at 4-5 more weeks for those waiting on the front rotors, and 3-1/2 months on the rears! :(

Take care and stay warm!

01-07-2010, 12:43 PM	#2104
Blue70SS Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry Join Date: Aug 2009 Location: Denver Posts: 2,126	RB Stainless Brake line installation FYI: I noticed a few of you doing the stainless brake lines. Be carefull threading them together. MTCWBY's went on fine, but 1 of mine tried to cross thread and the last one I had to rethread the factory male coupling nut (reinstalled old one temporarily). Wasn't a problem with stainless line, but more like factory build problem. When removing the old brake line it started fine, then got real tough towards end of removal and flattened threads - so had to purchase a die set with 10mm 1.00 threads. PM me if you need more info. __________________ LPE 650+,IOM Pearl White Rallys 860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit LPE Brotherhood .

01-07-2010, 08:34 PM	#2107
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Hey Paul your ready yet? I just have to see the final product. Remember you can PM that dyno. __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

01-07-2010, 10:16 PM	#2108
2010 BADSS Drives: 2010 2SS/RS IOM Join Date: Sep 2009 Location: New Mexico Posts: 1,210	Blue, No transport date yet. Don't worry, everything is all set up, but they are still doing the fine tuning and then the dyno. I know the weather has not been so cooperative, but it will be done soon! 570, I'll be sure to post the dyno as soon as it comes in, especially if it's higher than RS's Transformation almost complete! MWS, is there anything I can do for the right foot twitch (besides driving RS's car) ? There's too much salt on the road. __________________ LPE 650 BHP package Dual disc clutch set Borla catback exhaust-S type DSS 9" rear with 3.90 gear Pfadt suspension/Hotchkiss chassis brace Forgeline Wheels VR3S/Nitto tires Beware of the LPE Sisterhood

01-08-2010, 09:33 AM	#2112
Speed74SS Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008 Location: Sioux Falls, SD Posts: 1,640	I can't wait to see some dyno's and pictures!! __________________ '10 CTS-V : LPE 650+ Package 587hp / 582tq 2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI

01-08-2010, 06:44 PM	#2114
Windy City Drives: Not enough room here! Join Date: Jul 2009 Location: Plainfield, IL Posts: 1,016	Hi Brothers and Sisters! Weather sucks here, and most of the country from what I'm hearing! Chicagoland boat show next week! I think it's time to look at a go-fast boat! FYI, Racing Brake is looking at 4-5 more weeks for those waiting on the front rotors, and 3-1/2 months on the rears! :( Take care and stay warm! __________________ BEWARE OF THE LPE BROTHERHOOD! Remember: You can sleep in your car, but you can't drive your house!

01-07-2010, 10:55 AM	#2103
600hp-lpe Drives: 2010 Join Date: Jul 2009 Location: NH Posts: 4,788	anyone want to buy a set of BMR trailing arms? I have a set - Brand new - never been installed. Red powder coat with Grease fittings. Figured I'd offer them to my LPE brethren first.. Send me a PM if interested.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lingenfelter 2010 Camaro Engine Packages Including New Vehicle Now Available	Tim@Lingenfelter	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	06-18-2010 08:11 AM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp!	Sizzox	5th Gen Camaro SS LS LT General Discussions	108	04-14-2010 08:09 PM
My Lingenfelter Camaro Build	Speed74SS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	244	10-08-2009 11:00 PM
Lingenfelter Supercharged Camaro makes 600 RWHP!!	Kevin@Lingenfelter	Forced Induction - V8	218	06-24-2009 03:26 PM
Three 2010 Camaros Arrive at Lingenfelter Performance Engineering	Sizzox	5th Gen Camaro SS LS LT General Discussions	25	04-26-2009 02:15 PM