Recommended Tire Sizes for 2010 Camaro

[IKANDI]

I need help please.
I'm confused, I want to make sure I get the right size.
I have a 2010 Camaro, a few weeks ago I purchased some wheels from a little tire shop.
The wheels are 20" Chevy Camaro Factory Wheels but I have no idea what year car they came off of.
Sooo, Im wondering... besides calling the guy I bought them from, is there a way to find out what year they are?? I assume the tire size I need depends on the originality of the wheels, right?
Any input is greatly appreciated, thanks in advance guys.

[Gman1135]

I have new wheels the Mickey thompson SC-5 ESS ,,,Front 20x9 ,bolt 5x120mm ,BS 5.87",ET:+22mm,,, which im going to put my rear old tires that are in good shape on the front ,they are Perlli 275/40-20=28.7" tall.

Rear wheels 20x10.5, bolt 5x120mm,BS.7.09,ET:+34mm,,which Im thinking of putting ether the perlli 305/35-20=28.4" tall or the 315/35-20=28.7" tall.

Would the 305/35-20 be to small of a diameter that would throw my speedo off,,could you see the size difference,, looking at it?? The 305/35 are more readily available// The 315/35 would have to be backorder.

Do any of you see an unseen, to me problem? Before I spend another $1000.

[MikeMoach]

Forgive me for not reading every page, I'm gunna be purchasing the 1LE 10 spoke rim and I'm not sure if I understand the first post 100% but if I do get it these tires below are the sizes I need correct?

285/40-20 = 28.9" tall, 9.0-10.0 wheel
305/35-20 = 28.4" tall, 10.0-10.5 wheel

[Retro69]

Is this something similar to this excellent thread for drag radials?

[olblue75]

Looking at buying a set of new Hurst Stunner wheels for my 2010 2SS i want to run the 20x9s with 275 all around but i can t seem to find the off set for the 20x9 Stunners which is a front fitment dont want them tucked to far inside the rear wheel well. Any help with find the offsets will be appreciated. I have sent hurst wheels a email and no response and tire rack just keeps telling me i cant run 275 in the front unless i roll the fender well lips or modify it some how. the ZL1 runs a 285 20 in the front so i dont see a issue with it.

[mlee]

Originally Posted by Retro69

Is this something similar to this excellent thread for drag radials?

Pretty much the same rules apply as what this thread is meant for.

Originally Posted by MikeMoach

Forgive me for not reading every page, I'm gunna be purchasing the 1LE 10 spoke rim and I'm not sure if I understand the first post 100% but if I do get it these tires below are the sizes I need correct?

285/40-20 = 28.9" tall, 9.0-10.0 wheel
305/35-20 = 28.4" tall, 10.0-10.5 wheel

Perfect..

[MikeMoach]

[gomezcorp]

Front stock 245/45/20, if you went with a wider front like 265/45/20 how much will this wider front tire effect driving and handling? Anyone?
I currently run 255/40/20 front and 295/35/20 rear Nitto Invos, 255 in the front isn't much different than the stock 245. Planning on rear Michelin SS 295/35/20 in the near future.

[vroomapunk]

I am going to buy the silver ZL1 rim replicas, and want to know what width and offset to buy to get a square setup that can be rotated.

at least 285's, 20 inch

[Dennis SS]

Where can I find 285/40 x 20???? Ive been looking high and low and cant find this tire size!! I see alot of people talking about this tire size and Im after it but I can only find one made by Nitto and its an SUV tire.

[Dennis SS]

Oh I also find two run flats 285/40 x 20.

[510SS]

I'm planning on running 315/35/20 on a 10.5" TSW wheel on the rear lowered 1". Can anyone else running this setup or similar chime in on any issues please..... I want to make sure I'm not going to have any rubbing issues.

[Dennis SS]

End result for me was stock tire size :(

I went with nitto tires. Ratings are really good, get them Monday.

[SLEEPER SS]

I'm running 295/35/20 on front with 10.5 rims and love it