07-10-2016, 03:26 AM | #225 |
Drives: '14 1LS Join Date: Apr 2014
Location: Mandeville
Posts: 2,166
|
Bump
Sent from my iPhone using Tapatalk
__________________
Patiently waiting for my 2023 SS 1LE |
12-22-2016, 06:57 PM | #226 |
Drives: 2017 Hyper Blue 1LE Join Date: Dec 2016
Location: Albuquerque, NM
Posts: 253
|
Is sitting on the straps for your 5th and 6th point straps acceptable the way Cornerspeed did it? My past track car (with race seats) had a slot in the seat. That is not necessary?
|
04-17-2017, 06:29 PM | #227 |
Drives: 2015 1LS Red V6 Join Date: Aug 2015
Location: St Joseph, MO
Posts: 1,849
|
So, was reading about the Schroth Rallye 4 point setup. Price is good...but from what I am seeing, its mounting points dont meet Motorsports standards, which allow no more than a 10* down angle, the belt mount below the shoulder height, with 5* being optimal.
So why is this one recommended so much?
__________________
Sponsors:
Overkill Motorsport BCS Auto JacFab Machining APDEG Dream Gear Mobile Audio Thanks to Will @ Overkill Motorsports, Jason @ JacFab, Jim @ Ohio Speed, Brandon at Dream Gear, and the boys at Randy Curnow Chevrolet 5th Gen V6 Performance Facebook Group |
06-17-2018, 12:45 PM | #228 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,089
|
Skimmed through whole thread and can't find any info on a seat belt simulator/dummy connector to snap in while I'm tracking
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
06-17-2018, 02:35 PM | #229 |
Drives: 2014 Z/28 #398 Join Date: Dec 2014
Location: Homewood
Posts: 219
|
|
10-08-2021, 11:25 AM | #230 |
Drives: 2014 Camaro SS 1LE Join Date: Oct 2019
Location: Bakersfield CA
Posts: 196
|
Braun w Harness Bar
I’m taller and needed track day seats for helmet clearance.
I found a set cheap locally that were what I wanted. I also installed a harness bar n 5 point belts. Seats or OK. Real tight in kidney area. Not ideal but work. Last edited by shu92870; 10-08-2021 at 11:32 AM. Reason: Pics |
01-09-2022, 09:37 PM | #231 |
Drives: 2010 Camaro 1SS Join Date: Nov 2015
Location: CA
Posts: 360
|
Cobra Suzuka GT
Shoulder touches the door trim but other than that it fits perfectly
__________________
|
03-21-2022, 08:24 PM | #232 |
Blue Ray
Drives: Camaro 2SS 1LE, Blue Ray Join Date: Dec 2021
Location: Central CT
Posts: 13
|
With the start of the driving season working towards making the car safe for the track it's a concern. For many years I had a track ready and modified Pontiac Solstice GXp. I've been lucky to have a great race shop near me, Jannetty Racing. They are so helpful in getting the car prepped.
|
|
|
|
|