What Did You Do To Your Camaro Today? - Page 1840 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Aqua Blue RS/SS · 01-10-2023, 12:07 AM

Parked my company truck at the shop and Went out for a therapy session this morning, threw it thru some nice twisty curves pretty hard, running some errands on the scenic route for work. Then i came home and parked the company truck again in favor of some more errands in the IROC. Sometimes it’s nice to just punish them them a little bit and enjoy a nice semi white knuckle ride.

joekono · 01-10-2023, 04:03 AM

Quote:

Originally Posted by Royal Tiger

Installed the aluminum racing pedals from Southern Car Parts today.

Lookin good Royal Tiger!! Huge difference!!!

2010sgm · 01-10-2023, 04:50 AM

Quote:

Originally Posted by Royal Tiger

Installed the aluminum racing pedals from Southern Car Parts today.

Those are sharp very nice

Indian_Mack · 01-10-2023, 08:08 AM

Did a few things. Added heat shield material to the cold air intake walls. Not sure if it'll make any difference, but we'll see. Installed the windshield washer tank relocation kit from phastek.
Did pcv mod, and installed a catch can.
Been interested in the laminator intake mod for a while, but they've been out of stock for a long time. So i did my own. Filled the intake plenum hole with jb weld and shaped it to be smooth.
So far, the heat shield mod and windshield washer relocation have made about 5 degrees difference on the intake temperature according to the Torque app. Been too wet out to do any good pulls too see if there been a difference in hp. Seems a bit better based on how it feels in the seat though.

Royal Tiger · 01-10-2023, 09:13 AM

Quote:

Originally Posted by joekono

Lookin good Royal Tiger!! Huge difference!!!

Quote:

Originally Posted by 2010sgm

Those are sharp very nice

Thank you. And yes the mats are very dirty currently as the car is partially torn apart for the full cage installation.

ariZona28 · 01-10-2023, 10:22 AM

Quote:

Originally Posted by Royal Tiger

Thank you. And yes the mats are very dirty currently as the car is partially torn apart for the full cage installation.

I'm a bit of a safety enthusiast so I've always felt uncomfortable in a high HP vert. Your car is going to look WICKED with that full cage. Can't wait to see!

Royal Tiger · 01-10-2023, 10:39 AM

Quote:

Originally Posted by ariZona28

I'm a bit of a safety enthusiast so I've always felt uncomfortable in a high HP vert. Your car is going to look WICKED with that full cage. Can't wait to see!

Thank you. It’s been sooo hard with the waiting but it should look great. Cage will be white.

Here are the seats and harnesses. I have 5 points but we just did 4 to see how it looks.

Red.bottom · 01-10-2023, 11:18 AM

Installed a rotofab intake

zmotorsports · 01-10-2023, 02:25 PM

Fairly new Fifth Gen owner here but I've been plugging away at zeroing out our new to us 2013 SS/RS. All fluids and filters got replaced as well as a new Borla ATAK system installed and JRE dipstick while servicing the trans.

Also spent some time detailing the engine bay and truck area by removing all plastic panels, cleaning and treating with 303 before reinstalling.

HyperV117 · 01-10-2023, 03:57 PM

Quote:

Originally Posted by zmotorsports

Fairly new Fifth Gen owner here but I've been plugging away at zeroing out our new to us 2013 SS/RS. All fluids and filters got replaced as well as a new Borla ATAK system installed and JRE dipstick while servicing the trans.

Also spent some time detailing the engine bay and truck area by removing all plastic panels, cleaning and treating with 303 before reinstalling.

That thing looks mint.

zmotorsports · 01-11-2023, 09:17 AM

Quote:

Originally Posted by HyperV117

That thing looks mint.

Thank you. I am pretty pleased with it for a 10-year old car. Looked for several months until we found "the one" that was virgin and unmolested but clean. It only had 61k miles when we bought it and just has taken some TLC to bring it back.

2010sgm · 01-11-2023, 03:04 PM

Quote:

Originally Posted by zmotorsports

Thank you. I am pretty pleased with it for a 10-year old car. Looked for several months until we found "the one" that was virgin and unmolested but clean. It only had 61k miles when we bought it and just has taken some TLC to bring it back.

definitely a beautiful ride and color....

zmotorsports · 01-11-2023, 03:36 PM

Quote:

Originally Posted by 2010sgm

definitely a beautiful ride and color....

Thank you.

joekono · 01-11-2023, 07:54 PM

Installed the Pedal Commander!!!! Wow, the V-6 really moves now

. Seriously, I'm very happy with it.

01-10-2023, 12:07 AM	#25747
Aqua Blue RS/SS Drives: ABM #93 Join Date: Oct 2018 Location: Lotaburger Posts: 3,188	Parked my company truck at the shop and Went out for a therapy session this morning, threw it thru some nice twisty curves pretty hard, running some errands on the scenic route for work. Then i came home and parked the company truck again in favor of some more errands in the IROC. Sometimes it’s nice to just punish them them a little bit and enjoy a nice semi white knuckle ride. __________________ ABM #2399 2SS/RS:SOLD ABM #93 2SS/RS Black Rally stripes, Titanium Interior 4,000 miles: GM GFX side skirts and diffuser waiting on paint, GM dovetail, GM heritage, RPI ZL1 style splitter. ‘87 IROC-Z Iroc blue. all original unmolested with 50K miles.

01-10-2023, 11:18 AM	#25754
Red.bottom Drives: 14 2SS Join Date: Aug 2022 Location: Houston Posts: 18	Installed a rotofab intake Attached Images

01-10-2023, 02:25 PM	#25755
zmotorsports Hardcore Gearhead Drives: 2013 Camaro SS Join Date: Dec 2022 Location: Northern Utah Posts: 46 View My Garage	Fairly new Fifth Gen owner here but I've been plugging away at zeroing out our new to us 2013 SS/RS. All fluids and filters got replaced as well as a new Borla ATAK system installed and JRE dipstick while servicing the trans. Also spent some time detailing the engine bay and truck area by removing all plastic panels, cleaning and treating with 303 before reinstalling. Attached Images __________________ Mike 2013 2SS/RS

01-11-2023, 07:54 PM	#25760
joekono Drives: Camaro Convertible 2014 1LT Join Date: May 2019 Location: New Jersey Posts: 1,103 View My Garage	Installed the Pedal Commander!!!! Wow, the V-6 really moves now. Seriously, I'm very happy with it. Attached Images __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM

01-10-2023, 08:08 AM	#25750
Indian_Mack Drives: 2013 Chevy Camaro 1LT Join Date: May 2022 Location: Lacey, Wa Posts: 168	Did a few things. Added heat shield material to the cold air intake walls. Not sure if it'll make any difference, but we'll see. Installed the windshield washer tank relocation kit from phastek. Did pcv mod, and installed a catch can. Been interested in the laminator intake mod for a while, but they've been out of stock for a long time. So i did my own. Filled the intake plenum hole with jb weld and shaped it to be smooth. So far, the heat shield mod and windshield washer relocation have made about 5 degrees difference on the intake temperature according to the Torque app. Been too wet out to do any good pulls too see if there been a difference in hp. Seems a bit better based on how it feels in the seat though.