Fuse Pull: Low Octane Fuel Fix For L99 and LS3. Reset Fuel Map for High Octane Fuel. - Page 187 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PuertoRoc253 · 07-21-2014, 07:02 PM

Does this go for 2014 Camaros also?

Muscle Car Memories · 07-21-2014, 07:19 PM

Quote:

Originally Posted by PuertoRoc253

Does this go for 2014 Camaros also?

Thats what ive been wondering....

BLTZKRG · 07-22-2014, 03:08 PM

I just did it to my 2014 last week at around 350mi.....i will say it seems to pull better...but that may be due to breaking in/loosening up. I will try it again soon...i was only able to leave fuses out for maybe 2-3hrs.

Demon War Horse · 07-22-2014, 03:28 PM

I am considering this on mine as well, but I am still under 500 miles and trying to not hot dog too much.

BLTZKRG · 07-22-2014, 04:13 PM

I did it to my 14' dont know if it made a huge diff
Or not yet....i dont think they were unplugged long enough....seems to pull better though.

Emig5m · 07-22-2014, 10:23 PM

Quote:

Originally Posted by redhotcandy

I just purchased a used 2012 SS/RS with 26K miles on it. I've noticed that while idling, it feels a little "rough" for lack of a better word. Sort of a shake to it. Nothing major, but I can just feel it. And, upon acceleration, it feels a little hesitant. I traded a V6 for the SS and wasn't sure about the way it should feel, since it has a larger engine. I've only put 93 in it (filled up 2X so far) so I'm just wondering, if the dealer had only put in 87, would it still be effecting performance at this point? I'm reading about fuse pulling, and wondering if it's something I should try. Any thoughts?

They all shake. A brand new 2014 I test drove did just like my 2010, and the 2011 and 12 I test drove as well. The V8 just has a more rugged feel to it than the v6.

DOOK · 07-23-2014, 12:24 AM

Mine shakes too. Not quite a miss. I understand it is the cam. I am taking in my 2010 for a combustion chamber decarbonizing tomorrow, I will get back if makes a difference.

wakespeak · 07-23-2014, 12:40 AM

Quote:

Originally Posted by Emig5m

They all shake. A brand new 2014 I test drove did just like my 2010, and the 2011 and 12 I test drove as well. The V8 just has a more rugged feel to it than the v6.

Mine cleared up a lot after installing a catch can.

JKO · 07-23-2014, 01:26 AM

I was told that 2014's didn't seem to need to do the fuse pull but I figure when I have time I will do it anyway can't hurt.

Scott@Bjorn3D · 07-23-2014, 08:01 AM

Quote:

Originally Posted by JKO

I was told that 2014's didn't seem to need to do the fuse pull but I figure when I have time I will do it anyway can't hurt.

Yes they do. You guys do not understand to change the programming in the ECM they would have to get the entire car re-CARB certified which cost a shit load of money. The problem will not be fixed until a total car redesign when they have to get that car CARB certified.

LS3goyo · 07-23-2014, 12:37 PM

I tried the "fuse pull" and I felt like it made the car slower at highway speeds. I could be wrong and I only had the fuses pulled for a little over an hour. I've owned the car for a little over a month now.

Mando2776 · 07-26-2014, 03:13 AM

Quote:

Originally Posted by LS3goyo

I tried the "fuse pull" and I felt like it made the car slower at highway speeds. I could be wrong and I only had the fuses pulled for a little over an hour. I've owned the car for a little over a month now.

I don’t think u left the fuses off long enough, most owners on here have pulled them out for 3-4 hrs and as much as overnight. I just pulled mine out around 9pm will reinstall them at 730am.
We’ll see if I do notice a change in performance.
my camaro is a 2013 ss with 2,300 mi

JKO · 07-27-2014, 02:02 PM

Quote:

Originally Posted by Scott@Bjorn3D

Yes they do. You guys do not understand to change the programming in the ECM they would have to get the entire car re-CARB certified which cost a shit load of money. The problem will not be fixed until a total car redesign when they have to get that car CARB certified.

Ok dude calm down i asked the question when i 1 st got the car because almost everyone that noticed a big difference was older models and i was answered that it wasn't noticed much with 2014's thanks for your info.

Demon War Horse · 08-08-2014, 08:10 AM

Not sure if I should do this or not... I have 1100 miles on it now, we bought it with 13 miles on it. Just not sure what the dealer filled it with. We have 93 in TX, so I am thinking of doing this tonight just to see.

Thoughts?

Any 2014's see any difference?

07-22-2014, 03:08 PM	#2607
BLTZKRG Drives: 2014 Camaro SS Join Date: Jul 2014 Location: dover pa Posts: 248	I just did it to my 2014 last week at around 350mi.....i will say it seems to pull better...but that may be due to breaking in/loosening up. I will try it again soon...i was only able to leave fuses out for maybe 2-3hrs. __________________ 2014 Ashen Gray Metallic 2SS/RS M6 CAGS Skip-Shift Eliminator 1LE Strut Tower Brace GMPP Track Pack Axleback Halltech CAI Fuse Pull Mod

07-22-2014, 03:28 PM	#2608
Demon War Horse War Horse Pilot Drives: 2017 NFG 1SS 1LE Join Date: Jul 2014 Location: N.Texas Posts: 2,458 View My Garage	I am considering this on mine as well, but I am still under 500 miles and trying to not hot dog too much. __________________ COTW 09/07/2015 - 2014 AGM 2SS/RS - RIP 6/01/17 2017 Nightfall Gray Metallic 1SS 1LE Born 5/17/17 - *Click Sig Pic below for for Demon War Horse 02 Build Thread* SigPic by Hazman

07-22-2014, 04:13 PM	#2609
BLTZKRG Drives: 2014 Camaro SS Join Date: Jul 2014 Location: dover pa Posts: 248	I did it to my 14' dont know if it made a huge diff Or not yet....i dont think they were unplugged long enough....seems to pull better though. __________________ 2014 Ashen Gray Metallic 2SS/RS M6 CAGS Skip-Shift Eliminator 1LE Strut Tower Brace GMPP Track Pack Axleback Halltech CAI Fuse Pull Mod

07-23-2014, 12:24 AM	#2611
DOOK Wearing My BowTie Drives: 2SS~RS VR~Black Ralley's Join Date: Sep 2011 Location: South Surrey Posts: 97	Mine shakes too. Not quite a miss. I understand it is the cam. I am taking in my 2010 for a combustion chamber decarbonizing tomorrow, I will get back if makes a difference. __________________

07-23-2014, 01:26 AM	#2613
JKO Drives: 2016 2 SS Join Date: Jun 2014 Location: South Louisiana Posts: 154	I was told that 2014's didn't seem to need to do the fuse pull but I figure when I have time I will do it anyway can't hurt. __________________ 69 Camaro 461 BBC street car 2020 ZL1 .

07-21-2014, 07:02 PM	#2605
PuertoRoc253 Drives: 2012 2SS Join Date: Feb 2014 Location: Tacoma, WA Posts: 25 View My Garage	Does this go for 2014 Camaros also?

07-23-2014, 12:37 PM	#2615
LS3goyo Drives: '10 2SS/RS Join Date: Jun 2014 Location: La Puente Posts: 171	I tried the "fuse pull" and I felt like it made the car slower at highway speeds. I could be wrong and I only had the fuses pulled for a little over an hour. I've owned the car for a little over a month now.

08-08-2014, 08:10 AM	#2618
Demon War Horse War Horse Pilot Drives: 2017 NFG 1SS 1LE Join Date: Jul 2014 Location: N.Texas Posts: 2,458 View My Garage	Not sure if I should do this or not... I have 1100 miles on it now, we bought it with 13 miles on it. Just not sure what the dealer filled it with. We have 93 in TX, so I am thinking of doing this tonight just to see. Thoughts? Any 2014's see any difference? __________________ COTW 09/07/2015 - 2014 AGM 2SS/RS - RIP 6/01/17 2017 Nightfall Gray Metallic 1SS 1LE Born 5/17/17 - *Click Sig Pic below for for Demon War Horse 02 Build Thread* SigPic by Hazman

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2010 Camaro PCM Pin-out Description and Wire Colors (LS3 & L99)	raptor	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	14	06-02-2020 01:51 PM
What kind of gas are you filling up with in your '10 Camaro?	JewelZ	5th Gen Camaro SS LS LT General Discussions	42	08-02-2009 10:31 AM
Check your Order here	bvonscott	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	665	06-29-2009 02:00 PM