07-20-2013, 05:32 PM | #253 |
|
I've been fighting it for 2 hrs lol I can't seem to maneuver it in there
__________________
1 7/8" TSP headers straight piped, Custom Tick Performance cam w/ supporting mods, 1" BMR springs and other BMR suspension mods. Tuned with HPtuners by Matt@FSP
|
07-20-2013, 05:35 PM | #254 |
V8 Lounge member #2
Drives: 2001 Ws6 Join Date: Sep 2009
Location: Burbank,IL
Posts: 6,373
|
__________________
2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.
|
07-20-2013, 05:36 PM | #255 |
V8 Lounge member #2
Drives: 2001 Ws6 Join Date: Sep 2009
Location: Burbank,IL
Posts: 6,373
|
Is your old oring in the pump still bud? Check to see there's nothing obstructing the area where the tube slides into.
__________________
2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.
|
07-20-2013, 05:38 PM | #256 |
|
No I got that one out. Ill keep trying and let you guys know. thanks
__________________
1 7/8" TSP headers straight piped, Custom Tick Performance cam w/ supporting mods, 1" BMR springs and other BMR suspension mods. Tuned with HPtuners by Matt@FSP
|
07-20-2013, 05:38 PM | #257 |
V8 Lounge member #2
Drives: 2001 Ws6 Join Date: Sep 2009
Location: Burbank,IL
Posts: 6,373
|
Here's my .2 bud
__________________
2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.
|
07-20-2013, 05:46 PM | #258 |
|
It's tight where that bolts at but on the other side it's got a little gap. Loosened the 4 bolts for the pump but still can't get a complete seal
__________________
1 7/8" TSP headers straight piped, Custom Tick Performance cam w/ supporting mods, 1" BMR springs and other BMR suspension mods. Tuned with HPtuners by Matt@FSP
|
07-20-2013, 05:50 PM | #259 |
V8 Lounge member #2
Drives: 2001 Ws6 Join Date: Sep 2009
Location: Burbank,IL
Posts: 6,373
|
Unbolt the tube make sure the ring is oiled and start by trying to snap it in even or by starting on the side that has the gap.
__________________
2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.
|
07-20-2013, 05:59 PM | #260 |
come find out;)
Drives: stockish 2012 camaro ss Join Date: Oct 2012
Location: speed county
Posts: 2,166
|
The pickup tube is going to need adjusting at least mine did I had to take it off place the oil pump completely sealed with the pickup tube and then reinstall the pickup tube. Nonetheless I had my engine out ha
|
07-20-2013, 06:12 PM | #261 |
|
Better?
__________________
1 7/8" TSP headers straight piped, Custom Tick Performance cam w/ supporting mods, 1" BMR springs and other BMR suspension mods. Tuned with HPtuners by Matt@FSP
|
07-20-2013, 06:22 PM | #262 |
V8 Lounge member #2
Drives: 2001 Ws6 Join Date: Sep 2009
Location: Burbank,IL
Posts: 6,373
|
Yea but that bolt looks a little iffy but if its nice n tight go for it!! Looks good bud!!! You did it. Now start that biach up.
__________________
2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.
|
07-20-2013, 06:23 PM | #263 |
V8 Lounge member #2
Drives: 2001 Ws6 Join Date: Sep 2009
Location: Burbank,IL
Posts: 6,373
|
Is it bolted back up yet?
__________________
2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.
|
07-20-2013, 06:26 PM | #264 |
|
yeah that bolt a bit tore up, hopefully it dont screw me, putting it all back together now give me a bit and ill have a video for you guys!!
__________________
1 7/8" TSP headers straight piped, Custom Tick Performance cam w/ supporting mods, 1" BMR springs and other BMR suspension mods. Tuned with HPtuners by Matt@FSP
|
07-20-2013, 06:27 PM | #265 |
V8 Lounge member #2
Drives: 2001 Ws6 Join Date: Sep 2009
Location: Burbank,IL
Posts: 6,373
|
Ok hold on did you put a lol blue loctite on the pump bolts? Of not its cool just asking. If you can still do it. Do it for me.
__________________
2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.
|
07-20-2013, 06:30 PM | #266 |
|
of course i did buddy! what do you think i am a first timer? lol dont answer that
__________________
1 7/8" TSP headers straight piped, Custom Tick Performance cam w/ supporting mods, 1" BMR springs and other BMR suspension mods. Tuned with HPtuners by Matt@FSP
|
|
|
|
|