Rider Graphix, can you answer this question? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

FINALLYSATISFIED · 09-06-2010, 08:53 AM

Quote:

Originally Posted by autoguy

Yes, if it is available from our supplier.

Do you know if Satin black can be made custom if so, i'd like to place an order for "Satin Black".

And i'll let you use my picture of ads, I could care less. I love the look of your products i'm not looking for a discount, so no worries here. I just want "satin black", lol.

autoguy · 09-06-2010, 11:15 AM

The only colors listed on the color chart are Matte Black, Black and Semi Gloss Black. Is there a specific reason you want "Satin"? We have been selling and installing Flat/Matte Black on all of the new Camaros. I do not have a supplier that offers a "Satin" finish black.

If you want to see all three colors, we have a color chart available here..... http://www.ridergraphix.com/colorchart.html

FINALLYSATISFIED · 09-06-2010, 11:51 AM

Quote:

Originally Posted by autoguy

The only colors listed on the color chart are Matte Black, Black and Semi Gloss Black. Is there a specific reason you want "Satin"? We have been selling and installing Flat/Matte Black on all of the new Camaros. I do not have a supplier that offers a "Satin" finish black.

If you want to see all three colors, we have a color chart available here..... http://www.ridergraphix.com/colorchart.html

Yeah, my ACS V8 Splitter is being painted Satin Black by GarysCustoms, so there was a certain look I was going for...

Thank you though, i read on your site that you guys do "custom colors" so I assumed there was a way, thank you for your patience though.

autoguy · 09-06-2010, 12:28 PM

I would use the Flat Black. It has a Satin finish to it.

FINALLYSATISFIED · 09-06-2010, 12:33 PM

Quote:

Originally Posted by autoguy

I would use the Flat Black. It has a Satin finish to it.

I'll look into it, thanks much!

Rob191288 · 09-06-2010, 01:59 PM

Autoguy, do you have any pics of the orange rally stripes???

LosingReality · 09-10-2010, 10:21 AM

Anyone know if the front bumper needs to be removed to install this?

autoguy · 09-10-2010, 10:33 AM

Quote:

Originally Posted by LosingReality

Anyone know if the front bumper needs to be removed to install this?

No, it does not.

autoguy · 09-10-2010, 10:35 AM

Quote:

Originally Posted by Rob191288

Autoguy, do you have any pics of the orange rally stripes???

We have sold a few sets, but have not received any installed photos back from customers.

LosingReality · 09-10-2010, 01:37 PM

Sorry to hijack the thread, but i just got mine in the mail and damn, no clue where to start....Does the dark paper come off first?

EDIT: Figured it out, it wasnt sticking to the light paper at first....

So do i cut it to fit the area?

FINALLYSATISFIED · 09-10-2010, 03:30 PM

Quote:

Originally Posted by LosingReality

Sorry to hijack the thread, but i just got mine in the mail and damn, no clue where to start....Does the dark paper come off first?

EDIT: Figured it out, it wasnt sticking to the light paper at first....

So do i cut it to fit the area?

I honestly would not install this myself unless you are familiar with graphics. I'd take it to the dealer or a body shop that has done this before, generally it'll only cost you a few bucks not much for them to slap these on. Thats just me though...

LosingReality · 09-10-2010, 03:38 PM

Quote:

Originally Posted by MY1STCAMAR0

I honestly would not install this myself unless you are familiar with graphics. I'd take it to the dealer or a body shop that has done this before, generally it'll only cost you a few bucks not much for them to slap these on. Thats just me though...

It was a bit overwhelming when i rolled it out, but now that i have it trimmed down very close....Its gonna be easy. ( i hope lol)

I like to do things on my own.....If i fail, i fail. But atleast i tried

FINALLYSATISFIED · 09-10-2010, 03:47 PM

Quote:

Originally Posted by LosingReality

It was a bit overwhelming when i rolled it out, but now that i have it trimmed down very close....Its gonna be easy. ( i hope lol)

I like to do things on my own.....If i fail, i fail. But atleast i tried

I hear ya! Well good luck man, post some pics' when you get it knocked out.

autoguy · 09-10-2010, 03:59 PM

Yes, you trim the excess paper off as close to the graphic as possible prior to removing the backing paper. Test fit it to get familiar with the position, and you can use masking tape as a guide so you know you have it positioned properly once you remove the paper and start to position it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro SS manual shipment (not production) hold officially confirmed by GM (UPDATED)	Tran	5th Gen Camaro SS LS LT General Discussions	715	07-24-2009 12:05 AM
Please answer my question...	IROCanSS	5th Gen Camaro SS LS LT General Discussions	23	07-16-2009 06:49 PM
KnightRider is back, AND HE'S A MUSTANG!	LSxcellent	General Automotive + Other Cars Discussion	139	05-15-2008 08:49 PM

09-06-2010, 11:15 AM	#16
autoguy Drives: 10 SS,11 SS Pace, 13 ZL1 IOM Join Date: Oct 2008 Location: Pennsylvania Posts: 1,735 View My Garage	The only colors listed on the color chart are Matte Black, Black and Semi Gloss Black. Is there a specific reason you want "Satin"? We have been selling and installing Flat/Matte Black on all of the new Camaros. I do not have a supplier that offers a "Satin" finish black. If you want to see all three colors, we have a color chart available here..... http://www.ridergraphix.com/colorchart.html

09-06-2010, 12:28 PM	#18
autoguy Drives: 10 SS,11 SS Pace, 13 ZL1 IOM Join Date: Oct 2008 Location: Pennsylvania Posts: 1,735 View My Garage	I would use the Flat Black. It has a Satin finish to it.

09-06-2010, 01:59 PM	#20
Rob191288 Drives: 2010 Camaro LS Join Date: Jun 2010 Location: Andrews AFB, MD Posts: 586 View My Garage	Autoguy, do you have any pics of the orange rally stripes???

09-10-2010, 10:21 AM	#21
LosingReality Drives: Camaro LS Join Date: Apr 2010 Location: Columbus GA Posts: 354	Anyone know if the front bumper needs to be removed to install this?

09-10-2010, 01:37 PM	#24
LosingReality Drives: Camaro LS Join Date: Apr 2010 Location: Columbus GA Posts: 354	Sorry to hijack the thread, but i just got mine in the mail and damn, no clue where to start....Does the dark paper come off first? EDIT: Figured it out, it wasnt sticking to the light paper at first.... So do i cut it to fit the area?

09-10-2010, 03:59 PM	#28
autoguy Drives: 10 SS,11 SS Pace, 13 ZL1 IOM Join Date: Oct 2008 Location: Pennsylvania Posts: 1,735 View My Garage	Yes, you trim the excess paper off as close to the graphic as possible prior to removing the backing paper. Test fit it to get familiar with the position, and you can use masking tape as a guide so you know you have it positioned properly once you remove the paper and start to position it.