![]() |
|
|
#15 |
![]() ![]() ![]() ![]() ![]() Drives: 2010 Camaro LS M6 Inferno Orange Join Date: May 2010
Location: Lebanon, OH
Posts: 1,673
|
You don't need the switch. Are these LED lights or the tubes? If LEDs, try swapping the wires to the LEDs. They will only work one way.
Also, is the dome light on? If the dome is off, the footwells will be off.
__________________
Gordy
Injen CAI / Solo Mach-X LLT / Solo High-flow res-cats / Barton short shifter / RX Catch Can / RPI Gills / 35% tint / LED Footwell Lighting Front & Rear / Pedders Street 1 / Pedders steering rack bushing / SS struts / Pfadt drop springs / VMax Ported Throttle Body / Spohn Toe Rods / Spohn Trailing Arms / Trifecta Tune / MACE 25mm Intake Spacers Find me on Facebook: http://www.facebook.com/gahammerle |
|
|
|
|
|
#16 |
|
Pro Hide n Seek Player
Drives: 2010 SS LS3/LSA 620whp/630tq Join Date: May 2009
Location: Tucson, AZ
Posts: 921
|
Tubes... the light was on, i tried doing the switch and it wasnt working either... I pulled out and tied off and i'll attack it again another day. Ive had it sitting in the garage for over a year, another week wont hurt.
thanks for the help
__________________
620whp/630wtq. ADM LSA Conversion, E85, PFADT Tri-Y Headers into Borla S, PFADT Swaybars, Springs, Links, 20x10 20x11 Forgestar F14s, Lots of AAC |
|
|
|
|
|
#17 | |
|
Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009
Location: Rio Rancho, NM
Posts: 12,161
|
Quote:
Yes, you could put another switch inline (with that grey to red wire) but it would be redundant since you use the dome light switch as the footwells switch in this case. Please PM me or ask if you have more questions when it comes to installing these. They aren't difficult once you get the wiring part of it down. Here to help! Ivan
|
|
|
|
|
|
|
#18 |
![]() Drives: 2011 camaro 2SS RS Join Date: Apr 2012
Location: Alaska
Posts: 107
|
Ivan will this work on 2011 2SS/RS tapping into the same wire?
|
|
|
|
|
|
|
|
![]() |
|
|