![]() |
|
|
#15 |
|
it's mind bottling..
Drives: SGM Join Date: Apr 2011
Location: miami floirda.
Posts: 5,392
|
i have whatever your smokin
![]() Btw these lights are cool and all but by god they give so many probems.
__________________
|
|
|
|
|
|
#16 | |
![]() Drives: 2LT RS Join Date: Jun 2010
Location: New Jersey
Posts: 584
|
Quote:
|
|
|
|
|
|
|
#17 | |
![]() Drives: 2011 Camaro 2ss Join Date: May 2012
Location: New York
Posts: 27
|
Quote:
My issue I am having is with one lamp. See my description for issues. I also noticed that there is water in the lamp. The other ones all look fine its just that one lamp I am havng issues with. I am taking it to the shop tomorrow first thing going to raise hell will kepp you posted on what the out come is. I really like these and hope that this issues gets resolved. |
|
|
|
|
|
|
#18 |
![]() ![]() |
I've had mine installed for several months now. Installed them myself. If you get one of the connectors backwards (reversed) they will be out of sink and not work correctly. Read the install instructions carefully. They state which direction the connector must face. Also do not connect the red wire (I think that is the correct color) to the battery. It is for show mode. If you have lights on all the time, that would be the only source of power when the key is off.
When I installed mine I had one connector backwards and the whole thing would not work correctly.
__________________
There's more to life than gas mileage
LS3, Whipple, Custom Comp Cam, springs, pushrods, timing set, CAI intake, Apex cold air scoop, Doug Thorley TRI-Y headers, Billet Custom Products baffled Valve covers, Mighty Mouse Catch can, ADM FPCM, ZL1 fuel pump, MSD boost-a-pump, Hex Vent hood vents, ProSport gauges(fuel pressure, AFR, Boost), Corsa, 100 cell Cats. Jannetty remote tuned, Pfadt trailing arms, all parts user installed. No Dyno yet. Manual trans. 3.45 gears. |
|
|
|
|
|
#19 | |
|
it's mind bottling..
Drives: SGM Join Date: Apr 2011
Location: miami floirda.
Posts: 5,392
|
Quote:
my car is a 2011 v6 the problems i have had so far. the inside gets condensation when ever it rains. living in miami, its a constant thing here. the fuse for the lights is cheap and had to be pinned up against my spare tire so it doesn't wiggle which if it wiggles, the lights will flicker like crazy. the up side on these lights if your encounter any problems. the company has some decent customer service. i told them about the condensation, they offered to take in my lights open them up , test them just in case the humidity caused any problems, re seal them with a better sealant and send them back. However they do not offer to pay for shipping when sending them the lights. nor do they offer to send any sort of compensation to have them removed by a professional company. if these lights have tought me anything, it will be this. they are the biggest pain in the butt to install and probably just as hard to remove. i also know if any wire is out of place or anything , the lights will freak out an not work properly. basically, at the end of the day i decided im going a different route with the lights and once i find a shop that will remove them correctly, i will send them back to technostalgia for the fix. once thats all done i will keep them in a box for when i feel like making a change again. if you are still Ok with all this than you sir are a soldier
__________________
|
|
|
|
|
|
|
#20 |
|
Switchin' n Twitchin'
Drives: 2011 Camaro Join Date: Nov 2010
Location: Chula Vista, CA (Eastlake)
Posts: 3,145
|
like with AAC... you'll see all the threads when people have problems, but none when people are satisfied with them.
__________________
I am not childish, you're just being a poopy head!
|
|
|
|
|
|
#21 |
![]() Drives: 2011 Camaro 2ss Join Date: May 2012
Location: New York
Posts: 27
|
If it was a "good" product with no install issues then there should not be any post about it with people having issues. That being said I think they look bad ass however people need to know about the problems
|
|
|
|
|
|
#22 |
![]() Drives: 2010 Camaro SS RS Join Date: Dec 2011
Location: Kansas
Posts: 163
|
I have had my Technostalgia tail lights for several months, no problems. Recently hooked up the "show mode" for an auto show, really neat. Point about instal...read ALL instructions carefully. Things can get screwed up quickly...the addendum IS important!
__________________
Only those who will risk going too far can possibly find out how far one can go. --T.S. Eliot
|
|
|
|
|
|
#23 | |
![]() Drives: 2LT RS Join Date: Jun 2010
Location: New Jersey
Posts: 584
|
Quote:
|
|
|
|
|
|
|
#24 |
![]() Drives: 2011 Camaro 2ss Join Date: May 2012
Location: New York
Posts: 27
|
So turns out my problem was that lamp. It drained my battery by staying on, would do crazy things, and filled with water in the rain. Called Todd from technostalgia they told me to send it back and they will test it repair or replace it. So I have to pay the body shop to pull it and reinstall. Wish technostalgia would of reimbursed me alittle. Expensive tailights to have all this hassle
|
|
|
|
|
|
#25 | |
![]() Drives: 2LT RS Join Date: Jun 2010
Location: New Jersey
Posts: 584
|
Quote:
|
|
|
|
|
|
|
#26 |
|
it's mind bottling..
Drives: SGM Join Date: Apr 2011
Location: miami floirda.
Posts: 5,392
|
everyone knows technostalgia shipped out the first few batches with crappy sealant.
they might still be shipping the bad lamps
__________________
|
|
|
|
|
|
#27 | |
![]() Drives: 2011 Camaro 2ss Join Date: May 2012
Location: New York
Posts: 27
|
Quote:
|
|
|
|
|
|
|
#28 |
![]() Drives: 2LT RS Join Date: Jun 2010
Location: New Jersey
Posts: 584
|
|
|
|
|
|
|
|
|
![]() |
|
|