22's and 24's - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Supermans · 06-13-2009, 04:03 AM

The owner is a poser.. Sheesh, be proud it isn't an RS..lol..

***Supermans secretly hides his Z28 emblem***

patriotpa · 06-13-2009, 07:45 AM

Yep. Looks like crap. Probably rides like crap too with those rubberband tires. He'll probably have hydraulics and sidepipes installed next.

cam2fst4u · 06-13-2009, 08:20 AM

good job on the fitment but not a fan of the wheels

novajess1972 · 06-13-2009, 03:04 PM

Quote:

Originally Posted by blackedout010

we need wheel police!!!

x2

steviefranchize · 06-14-2009, 11:02 PM

could you make a replica of the stock wheels but in a staggered set....like with a huge lip on the rear and a slightly smaller one in the front? if so how much? pm me -thanks

djsnoflake · 06-15-2009, 04:25 AM

You know, with the money he spent on those butt ugly rims, he probably could have afforded the actual RS package instead of just a sticker

(Nice job on the fitment though)

Rickscamero · 06-15-2009, 08:29 AM

Quote:

Originally Posted by JewelZ

NICE design for anyone who would desire that size. BUT ONE QUESTION...
is that even an 'RS'?

I have the answer :

I THINK NOT

Does it matter?

RS - still have the same engine? no?

Rickscamero · 06-15-2009, 08:30 AM

Oh - I see.. he has the RS emblem.. plz. excuse my last comment.

Red Hot SS · 06-15-2009, 11:26 AM

I really thought it would take a full year for someone to TRULY ruin a camaro. I was dead wrong, as it only took about 3 months

mojosc · 06-15-2009, 03:29 PM

I hear the displeasure with the design and oversizing. This is what the customer wanted and stepped up to pay for them as well. Open minded individuals would say "to each, his own" as I did. My post was to let you know what can be done realistically, not some pretty picutre of a fantasy wheel like other companies. The combination of a high offset and big brakes will not allow for a super deep lip with out using a forging that has a steep convex angle or the basketball shape (which no one likes). I'm just tryin to keep it real.

I hear the cry for the LS7 design and will design something similar. I already have a stock of concave forgings in 20" 22" and 24" available and will try and develop a concave fitment. Stay tuned.....

yellow1 · 06-15-2009, 03:44 PM

do u have a pic of these stock of concave forgings in 20" 22" and 24" available?

mojosc · 06-15-2009, 04:16 PM

Here's the 20". I have the convex forgings in the background so you see the concavity. The shape plus the big brakes will cause the fitment to have almost no lip.

2010_5thgen · 06-15-2009, 08:41 PM

i like the wheels combo desigions(24 and 22) but wrong wheels. i had those on my escalade a while back. i would have gone with something like a 5 bar in a 24 and 22.

Jericho · 06-16-2009, 07:22 AM

It's interesting to see the H8ters come out of the wood work when someone does something they want that's different. Especially since I see no one here bitching about how they gave this guy the money to do this to HIS CAMARO. I've even ordered a set of Rims for MY CAMARO too. I thought this was about doing your thing with YOUR CAMARO.

06-13-2009, 04:03 AM	#15
Supermans Camaro & Stang Enthusiast Drives: 2011 Mustang 5.0 in Kona Blue Join Date: Mar 2008 Location: Miami Posts: 4,729 View My Garage	The owner is a poser.. Sheesh, be proud it isn't an RS..lol.. *Supermans secretly hides his Z28 emblem* __________________ Bought my Camaro from Eric Hall(817) 421-7266

06-15-2009, 11:26 AM	#23
Red Hot SS Drives: 2010 Victory Red 2SS/RS M6 Join Date: Jan 2009 Location: Prince George, VA/Lexington, KY Posts: 586 View My Garage	I really thought it would take a full year for someone to TRULY ruin a camaro. I was dead wrong, as it only took about 3 months __________________ Virginians Join Group: Virginia is for (Camaro) Lovers! VIN: 2G1FT1EW8A9118043 Finally Home! (6/16)

06-15-2009, 04:16 PM	#26
mojosc Mojosc Drives: Maserati Gran Turismo Join Date: Apr 2009 Location: So Cal Posts: 23	Here's the 20". I have the convex forgings in the background so you see the concavity. The shape plus the big brakes will cause the fitment to have almost no lip. Attached Images

06-15-2009, 08:41 PM	#27
2010_5thgen Drives: 2012 Porsche Panamera 4 Join Date: Nov 2007 Location: Ohio Posts: 3,274 View My Garage	i like the wheels combo desigions(24 and 22) but wrong wheels. i had those on my escalade a while back. i would have gone with something like a 5 bar in a 24 and 22. __________________ Brixton Forged CM10 Wheels IN STOCK!!! RF7 SOON!!!! Camaro/M3/M4 wheels in stock High Gloss Titanium

06-13-2009, 07:45 AM	#16
patriotpa Account Suspended Drives: 02 Silverado, 09 Vue, 10 1SS Join Date: Aug 2008 Location: Tired of apologizing when we should be kickin' butt! Posts: 1,962 View My Garage	Yep. Looks like crap. Probably rides like crap too with those rubberband tires. He'll probably have hydraulics and sidepipes installed next.

06-13-2009, 08:20 AM	#17
cam2fst4u Drives: 08 SS trailblazer,08 Silverado Join Date: Mar 2009 Location: stanley va Posts: 6,268 View My Garage	good job on the fitment but not a fan of the wheels

06-14-2009, 11:02 PM	#19
steviefranchize Drives: truck Join Date: Apr 2009 Location: houston tx Posts: 71	could you make a replica of the stock wheels but in a staggered set....like with a huge lip on the rear and a slightly smaller one in the front? if so how much? pm me -thanks

06-15-2009, 08:30 AM	#22
Rickscamero Drives: Infiniti G35 Coupe Join Date: May 2009 Location: Toronto Posts: 85	Oh - I see.. he has the RS emblem.. plz. excuse my last comment.

06-15-2009, 03:29 PM	#24
mojosc Mojosc Drives: Maserati Gran Turismo Join Date: Apr 2009 Location: So Cal Posts: 23	I hear the displeasure with the design and oversizing. This is what the customer wanted and stepped up to pay for them as well. Open minded individuals would say "to each, his own" as I did. My post was to let you know what can be done realistically, not some pretty picutre of a fantasy wheel like other companies. The combination of a high offset and big brakes will not allow for a super deep lip with out using a forging that has a steep convex angle or the basketball shape (which no one likes). I'm just tryin to keep it real. I hear the cry for the LS7 design and will design something similar. I already have a stock of concave forgings in 20" 22" and 24" available and will try and develop a concave fitment. Stay tuned.....

06-15-2009, 03:44 PM	#25
yellow1 Drives: 1SS 6 SPD Join Date: Jun 2009 Location: MN Posts: 127	do u have a pic of these stock of concave forgings in 20" 22" and 24" available?

06-16-2009, 07:22 AM	#28
Jericho Come see me. Drives: Chevrolet Line-up Join Date: Sep 2008 Location: Virginia Beach, Va. Posts: 557 View My Garage	It's interesting to see the H8ters come out of the wood work when someone does something they want that's different. Especially since I see no one here bitching about how they gave this guy the money to do this to HIS CAMARO. I've even ordered a set of Rims for MY CAMARO too. I thought this was about doing your thing with YOUR CAMARO.