Randal's Nitrous ZL1

[Meister@Torq]

Here is the video

[blk13]

I can understand the pump running out with pulley and nitrous but being a wet kit why did it need injectors?

Originally Posted by ninsecgt

You are correct Paul. The wheels are factory repo from Doug. I believe a half pull was done because injectors ran out. If I remember correctly Paul advised that the car was making 610lb ft tq as low as 3200rpm starting with 30% of the nitrous flowing from a 100 shot.. must upgrade to id850 injectors and a msd booster pump before a full pull can be made so stay tuned. that pull was a 100 shot.....this car is controlled by a progressive nitrous controller.

[Meister@Torq]

Originally Posted by blk13

I can understand the pump running out with pulley and nitrous but being a wet kit why did it need injectors?

The injectors are at 100% duty cycle (even with a BAP to maintain pressure) with just a pulley (and intake). The injectors were more of a necessity without the nitrous and of course If you are running out of injector without the spray its never a good idea to keep them when requiring additional volume

A lot of these calculations have to do with WOT fuel mixture (as mentioned above) so some tuners/combos may have different results.

[ninsecgt]

Originally Posted by Meister@Torq

The injectors are at 100% duty cycle (even with a BAP to maintain pressure) with just a pulley (and intake). The injectors were more of a necessity without the nitrous and of course If you are running out of injector without the spray its never a good idea to keep them when requiring additional volume

A lot of these calculations have to do with WOT fuel mixture (as mentioned above) so some tuners/combos may have different results.

She's on e85 now!!

[ZL1Kid_AL]

Is this setup with spray bars or throttle body plate kit?

[GenF-GTS]

Why doesn't anyone use nano nitrous instead of a bottle heater

[blk13]

Im thinking about going to nano instead of bottle heater, im not sure why more dont either

[ninsecgt]

Originally Posted by ZL1Kid_AL

Is this setup with spray bars or throttle body plate kit?

Plate