Z/28 Cold air intake - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

StormTrooperZ28 · 01-13-2017, 04:22 PM

Quote:

Originally Posted by CreeperRS

I don't know why you exist?

frenchsquared · 01-13-2017, 06:33 PM

ron123 · 01-13-2017, 08:35 PM

Thanks for the shots showing scale of the various tubes. If anyone is about to do an install or has access to the MAF tube at the sensor, need one last piece of info: What is the INSIDE diameter of the Z28 tube at the MAF Sensor location? On the SS the stock OEM diameter is 3.75" at the MAF sensor.
From the ruler pictures posted looks like the Z28 elbow is 5 inches outside and that would make it about the same 3.75" inside due to ribs.
Ron

frenchsquared · 01-14-2017, 08:55 AM

I agree with around 3.75" to 4" inside diameter. I thought about taking it apart but like i said it was 25 degrees outside and I only have 300 miles on the car. I know it doesn't matter for a hose clamp but.... Its flipping ass cold.

01-13-2017, 08:35 PM	#17
ron123 Drives: 2014 2SS/RS Join Date: Dec 2014 Location: Raleigh, NC Posts: 1,053	Thanks for the shots showing scale of the various tubes. If anyone is about to do an install or has access to the MAF tube at the sensor, need one last piece of info: What is the INSIDE diameter of the Z28 tube at the MAF Sensor location? On the SS the stock OEM diameter is 3.75" at the MAF sensor. From the ruler pictures posted looks like the Z28 elbow is 5 inches outside and that would make it about the same 3.75" inside due to ribs. Ron __________________ 2014 2SS/RS, Z28 CAI and High Wing Spoiler, ZL1 5.1:1 Ratio Short-Throw Shifter, ZL1 Pedals, ZL1 splash guards, NPP Dual-mode quad tip exhaust, Z28 strut tower brace, Camaro LED Cup-holders with footwell Lighting option, Leather visors, and Leather E-brake boot. Chevy dealer sponsored 67 retro SS nose stripe package.

01-13-2017, 06:33 PM	#16
frenchsquared Drives: 15 Z28, 01 Corvette, 96 Corvette Join Date: Dec 2016 Location: Colorado Posts: 863

01-14-2017, 08:55 AM	#18
frenchsquared Drives: 15 Z28, 01 Corvette, 96 Corvette Join Date: Dec 2016 Location: Colorado Posts: 863	I agree with around 3.75" to 4" inside diameter. I thought about taking it apart but like i said it was 25 degrees outside and I only have 300 miles on the car. I know it doesn't matter for a hose clamp but.... Its flipping ass cold.