TVS 2300 / Supercharger CAM Results and thoughts - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

old motorhead · 08-21-2009, 11:33 AM

Quote:

Originally Posted by ADM PERFORMANCE

I left the 3.8 belt on when I changed pulley.Looked like enough load....but was not.

I recommend 10+ ribs for more than 10 psi,8.5 should be fine.

We run a real tight lobe seperation.

Andy

I wonder if the vettes have a different accessory drive set up vs the Camaro. TVS's in trucks seem to have more trouble with belt slip. I was tempted to go to 10psi, but made more than enough power at 8.5. Might grenade more than a few parts at those levels.

My blower cam is on a 115LSA and I thought that was tight compared to most blower cams. Somebody with time and $ needs to do a comprehensive cam test with the TVS blowers. That would be interesting. I've seen 110 to 121 with everyone saying their cam made good power with a maggie on top.

pharmd · 08-22-2009, 09:28 AM

Quote:

Originally Posted by old motorhead

I wonder if the vettes have a different accessory drive set up vs the Camaro. TVS's in trucks seem to have more trouble with belt slip. I was tempted to go to 10psi, but made more than enough power at 8.5. Might grenade more than a few parts at those levels.

My blower cam is on a 115LSA and I thought that was tight compared to most blower cams. Somebody with time and $ needs to do a comprehensive cam test with the TVS blowers. That would be interesting. I've seen 110 to 121 with everyone saying their cam made good power with a maggie on top.

I'll second that...kinda aggravates me....I've not really seen a cam NOT make power on the TVS. Seems like most are around the same power level. I'd definitely pay to see a test of about 5 (or 10) grinds on a 6.2L with TVS on an engine dyno, to see what "general" duration and LSA seems to produce the best results.

old motorhead · 08-22-2009, 10:39 AM

If you talk to Magnuson, they will tell you the GT2-3 cam does a good job. That's as far as they go for a cam recommendation. That cam is so close to the stock LS3 cam that it wouldn't be worth the time or money to swap.

ADM PERFORMANCE · 08-22-2009, 09:11 PM

Quote:

Originally Posted by old motorhead

If you talk to Magnuson, they will tell you the GT2-3 cam does a good job. That's as far as they go for a cam recommendation. That cam is so close to the stock LS3 cam that it wouldn't be worth the time or money to swap.

I have use that cam in the past and it works..that was pre Ls3 days though.

We have a cam specific for the LS3 heads now that is just perfect.

Andy

Russo · 08-22-2009, 09:36 PM

Crowley, pm me the price and where you got the headers from please...

ADM PERFORMANCE · 08-23-2009, 08:05 AM

Quote:

Originally Posted by Russo

Crowley, pm me the price and where you got the headers from please...

It is on our website finally.

Andy

hot ss · 08-23-2009, 08:13 PM

how many pounds boost does the 3.6make with the headers?
and the 3.8?

Crowley · 08-24-2009, 08:39 AM

Quote:

Originally Posted by hot ss

how many pounds boost does the 3.6make with the headers?
and the 3.8?

I think the 3.8 will give you between 6 - 7 and the 3.6 is more like 8 lbs ..

thanks,
Crowley

hot ss · 08-24-2009, 12:16 PM

i shouldnt be so lazy, but what size is stock maggie pulley?

Crowley · 08-24-2009, 01:04 PM

Quote:

Originally Posted by hot ss

i shouldnt be so lazy, but what size is stock maggie pulley?

I think the 3.8 is the stock pulley, I'm not sure though ..

thanks,
Crowley

JM10 · 08-26-2009, 01:27 AM

Do you have videos?

Crowley · 08-26-2009, 08:20 AM

Quote:

Originally Posted by JM10

Do you have videos?

Currently this is the only video:

I am trying to get someone to ride with me to take some additional video. Hopefully soon.

Crowley

VegasNateG8 · 08-27-2009, 11:05 AM

Congrats on the Maggie! It puts a smile on my face every day.

Andro · 08-27-2009, 11:14 AM

Noice numbers

08-23-2009, 08:13 PM	#21
hot ss Drives: aqua 2ss l99 Join Date: Jun 2009 Location: Edmonton Posts: 1,215	how many pounds boost does the 3.6make with the headers? and the 3.8? __________________ May your exhaust note, sing in harmony with your blower. Last edited by hot ss; 08-23-2009 at 08:40 PM.

08-24-2009, 12:16 PM	#23
hot ss Drives: aqua 2ss l99 Join Date: Jun 2009 Location: Edmonton Posts: 1,215	i shouldnt be so lazy, but what size is stock maggie pulley? __________________ May your exhaust note, sing in harmony with your blower.

08-27-2009, 11:05 AM	#27
VegasNateG8 Drives: 2008 Pontiac G8 GT Join Date: Jun 2009 Location: Henderson, NV Posts: 46	Congrats on the Maggie! It puts a smile on my face every day. __________________ 2008 Pontiac G8 GT, HSV conversion, AirRex Digital Suspension, LSX 427, ported LSA supercharger, maybe a little NOS......

08-27-2009, 11:14 AM	#28
Andro NOICE!!! ™ Drives: Force Fed 427 Join Date: Jan 2009 Location: GOT BOOST? Posts: 5,213 View My Garage	Noice numbers __________________

08-22-2009, 10:39 AM	#17
old motorhead Drives: Maggie blown LS3 vette Join Date: Aug 2009 Location: SE TX Posts: 1,490	If you talk to Magnuson, they will tell you the GT2-3 cam does a good job. That's as far as they go for a cam recommendation. That cam is so close to the stock LS3 cam that it wouldn't be worth the time or money to swap.

08-22-2009, 09:36 PM	#19
Russo Unofficial Glass Tech Drives: 2014 Ford F150 FX2 Join Date: May 2009 Location: Raceland, LA Posts: 1,376	Crowley, pm me the price and where you got the headers from please...

08-26-2009, 01:27 AM	#25
JM10 Se habla español Drives: 2010 Camaro SS/RS VR Join Date: Jun 2009 Location: Arizona/Sonora Posts: 605	Do you have videos?