OBX headers installed very impressed - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tbss1 · 03-07-2015, 03:24 PM

I did mine about two an a half years ago. The install was easy no problems, also did the high flow cats, with MBR cat back, car sounds really good.[IMG]

[/IMG]

Jsafe17 · 03-07-2015, 03:30 PM

Quote:

Originally Posted by Hicompression

Good choice on the OBX! Back when I bought and installed mine 5 years ago, I was in the minority of owners with these. The naysayers were strong and many...

I bet they were

I just thought I would mention to everyone that I also have their cat back and it is equally as nice for the money.

BubbaSS · 03-07-2015, 03:59 PM

OBX has made a good name for themselves on this forum against all odds...Gotta hand it to them.

straka · 03-08-2015, 07:23 PM

What exhaust do you have connected to these headers??

hunter1660 · 03-08-2015, 07:32 PM

Bolts right up the stock cat back.

Jc's1LE · 03-08-2015, 07:40 PM

Quote:

Originally Posted by tbss1

I did mine about two an a half years ago. The install was easy no problems, also did the high flow cats, with MBR cat back, car sounds really good.[IMG]

[/IMG]

I was gonna get these but everyone was like ooo there junk dont get them bla bla bla those look good !

dustinlmiller13 · 03-08-2015, 07:56 PM

I bought these as well. Was going to put them on today but only had time for my AEM cai. Looking at mine the primaries look to be 2"? I thought they were listed at 1 7/8" but that was a typo or something, can anyone confirm this?

revived · 03-08-2015, 08:36 PM

Inside diameter and outside diameter are different measurments.

I believe inside diameter is how they list them.

300chopper · 03-08-2015, 09:08 PM

Had the same set on my 2010 ss and now my 2012 ss vert great set of headers for the money.

Scott 78 · 03-08-2015, 09:29 PM

Is a tune needed when installing headers?

BubbaSS · 03-08-2015, 10:18 PM

Quote:

Originally Posted by Scott 78

Is a tune needed when installing headers?

Not needed, but highly recommended. Without a tune you will most likely feel sluggish at lower rpms as hp/tq is lost down low, you may see lean/rich condition engine code(s), and you won't utilize all available peak hp/tq.

Jsafe17 · 03-08-2015, 10:56 PM

Quote:

Originally Posted by straka

What exhaust do you have connected to these headers??

Best deal only IF you want a cat back..

http://www.ebay.com/itm/2010-2012-Ch...d6f847&vxp=mtr

Or

http://www.ebay.com/itm/OBX-Cat-Back...ad0872&vxp=mtr

03-07-2015, 03:24 PM	#15
tbss1 More then meets the eye! Drives: 2010 Camaro 2SS/RS 426 hp Join Date: Oct 2008 Location: Maui Posts: 584 View My Garage	I did mine about two an a half years ago. The install was easy no problems, also did the high flow cats, with MBR cat back, car sounds really good.[IMG][/IMG] __________________ 2010 2SS/RS, M6, OBX 7/8" l/t headers, with high flow cats, MBRP full 3" exhaust, Whipple supercharger, 3.875 pulley, ID-1050X 1260CC injectors, JRE rough idle street blower cam kit, ZL1 fp, ZL1 fpcm, ZR1 3 bar map sensor, cold air intake, Richman 4.10 gears, BMR toe rods, trailing arms, f/r sway bars, f/r sway bar end links, BMR end link brackets, full BMR poly bushing including solid rear cradle bushings, BMR frame connectors and tunnel brace, f/r Hurst swaybar bushing brackets, Fluidamper, MGR shifter, and tune by Jannetty Racing.

03-07-2015, 03:59 PM	#17
BubbaSS WHAT RED LIGHT?! Drives: 2011 Black Camaro 2SS/RS M6 Join Date: Apr 2011 Location: Miami, Florida Posts: 1,115	OBX has made a good name for themselves on this forum against all odds...Gotta hand it to them. __________________ 2011 2SS/RS M6 BLACK - VARARAM NO TUNE INTAKE, MODDED AND PORTED TB, PORTED INTAKE MANIFOLD, VITESSE THROTTLE CONTROLLER, DOUG THORLEY LT'S, CATLESS, X-PIPE, 25" STAINLESS WORKS RETRO CHAMBERED MUFFLERS, CUSTOM 2.5" MANDREL BENT EXHAUST, RICHMOND 4.10 GEARS, CUSTOM CAM (231/242 @ 114LSA), MUSTANG DYNO TUNED BY TORQ, 20% CERAMIC TINTS, EIBACH PROKIT SPRINGS 1" DROP, HAWK PERFORMANCE CERAMIC BRAKES, NITTO INVO TIRES, HYDROCARBON TAIL LIGHT AND FOG LIGHT BEZELS BY EMBLEMPROS, METRA DASH KIT, JVC KW-AV71BT, PHOENIX GOLD iAMP GM1, PASSPORT QI45 - 450 RWHP 415 RWTQ

03-08-2015, 07:32 PM	#19
hunter1660 Drives: 2011ss/rs camaro Join Date: Sep 2011 Location: florida Posts: 1,261	Bolts right up the stock cat back. __________________ . OBX LTH,Rotofab,Magnuson Heartbeat.AEM wideband, HP Tuners

03-08-2015, 08:36 PM	#22
revived Vrrrm. Drives: 2011 2SS/RS LS3 Join Date: Jun 2013 Location: MA Posts: 1,495	Inside diameter and outside diameter are different measurments. I believe inside diameter is how they list them. __________________

03-08-2015, 07:23 PM	#18
straka Drives: 2015 SS Join Date: Mar 2015 Location: Shreveport Posts: 71	What exhaust do you have connected to these headers??

03-08-2015, 07:56 PM	#21
dustinlmiller13 Drives: 2013 Camaro SS Join Date: Sep 2013 Location: Hampton, TN Posts: 1	I bought these as well. Was going to put them on today but only had time for my AEM cai. Looking at mine the primaries look to be 2"? I thought they were listed at 1 7/8" but that was a typo or something, can anyone confirm this?

03-08-2015, 09:08 PM	#23
300chopper Drives: 2012 SS M6 45th anniversary vert Join Date: Aug 2009 Location: NC Posts: 50 View My Garage	Had the same set on my 2010 ss and now my 2012 ss vert great set of headers for the money.

03-08-2015, 09:29 PM	#24
Scott 78 Drives: 2014 SIM SS 6M Join Date: Feb 2012 Location: Beloit WI Posts: 301 View My Garage	Is a tune needed when installing headers?