What part is this called

[DaddySS]

The clips are a service part - the manual recommends replacing them whenever they're removed - the dealer should have them or go to a site like clipsandfasteners.com and you get a box for about what a single clip costs at the dealer.

The foam is there to hold the wire in place (if I remember correctly), just place it in a good position to hold the wire.

[SpeedRacer350]

Originally Posted by DaddySS

The clips are a service part - the manual recommends replacing them whenever they're removed - the dealer should have them or go to a site like clipsandfasteners.com and you get a box for about what a single clip costs at the dealer.

The foam is there to hold the wire in place (if I remember correctly), just place it in a good position to hold the wire.

Amazing! Thanks for the info! Those clips are 15 for $10. Here it is...

https://www.clipsandfasteners.com/GM...0-p/a22022.htm

(and also available on Amazon- search for that part number)

[KROLIS]

Originally Posted by Stewart

I attached mine just above the license plate, ran the wire behind the plate. There are holes behind it that lead to the underside of the car. I then ran the cable along side the wires next to the frame of the ca. Once I got to the front of the door I ran it through where the wires for the power windows go through (black grommet) Then up inside the "A" pillar and across the head liner to the camera.

You have any video of how it looks mounted there?