SLP SS Bowtie insert and rear SS Logo - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

55Designs · 12-05-2009, 09:00 PM

Looks Like il pick one up this week. I bought a spare grill because I want to bond this SLP part in, fill the seams( seams are very visible in all the photos online of this part installed and I HATE IT) with plastic ABS filler and spray the grill satin black and install the modern SS logo.

ac223mal · 12-06-2009, 12:35 AM

Quote:

Today 07:00 PM
55Designs Looks Like il pick one up this week. I bought a spare grill because I want to bond this SLP part in, fill the seams( seams are very visible in all the photos online of this part installed and I HATE IT) with plastic ABS filler and spray the grill satin black and install the modern SS logo.

Your gonna have to hurry as well, can't wait to see pictures of that!

SSTony · 12-06-2009, 04:06 PM

Quote:

Originally Posted by ac223mal

Did the rear one come from SLP with the plate to cover the holes? Did they come from SLP with the "SS" already attached to the plates? Wish they made them in RED, I would have ordered a pair already. Guess I could get them and then apply red vinyl overlay to them.

Hurry up and put'em on and post some pics! please...

SLP sends them all seperate cause you can order front and rear or just front and rear.

The injection molding that holds the SS for the front comes blank. you just peel off the sticker and stick the SS or RS logo to it. As for installation you just twist off the bowtie and turn it counter clockwise. then snap the injection molding in its place.

As for the rear it comes with the same SS logo for the front but it comes with a glossy black sticker to place after you remove the bowtie off the rear. They suggest you buy the blackout kit to help it stick out more.

cowboy1948 · 12-06-2009, 05:27 PM

Quote:

Originally Posted by ac223mal

Your gonna have to hurry as well, can't wait to see pictures of that!

Pics, Pics, Pics. WE WANT PICS.

ac223mal · 12-06-2009, 07:06 PM

Quote:

Originally Posted by SSTony

SLP sends them all seperate cause you can order front and rear or just front and rear.

The injection molding that holds the SS for the front comes blank. you just peel off the sticker and stick the SS or RS logo to it. As for installation you just twist off the bowtie and turn it counter clockwise. then snap the injection molding in its place.

As for the rear it comes with the same SS logo for the front but it comes with a glossy black sticker to place after you remove the bowtie off the rear. They suggest you buy the blackout kit to help it stick out more.

Thanks for that info, much appreciated. What do you have the rear mounted to? It doesn't look like a sticker from the picture. Speakin of pictures when do we get to see'em mounted on your ride?

SSTony · 12-06-2009, 09:44 PM

Quote:

Originally Posted by ac223mal

Thanks for that info, much appreciated. What do you have the rear mounted to? It doesn't look like a sticker from the picture. Speakin of pictures when do we get to see'em mounted on your ride?

Look at the pic below. The bottom is the front. The top is the SS on top of a black oval strip that sticks to the car after you remove bowtie.

cowboy1948 · 12-06-2009, 09:50 PM

Quote:

Originally Posted by SSTony

Look at the pic below. The bottom is the front. The top is the SS on top of a black oval strip that sticks to the car after you remove bowtie.

What are the measurments on these? the ss part i mean the goes on the rear.

SSTony · 12-06-2009, 09:53 PM

AntivenomSS · 12-07-2009, 09:41 AM

Anyone know the measurements of the pad and the letters? Can't seem to find them listed anywhere on the internet.

ac223mal · 12-07-2009, 11:08 PM

Thanks for the additional info and pics, makes perfect sense now.

SSTony · 12-08-2009, 05:14 PM

I just installed the front. i will do the back when the blackout kit comes in.

jdurhan · 12-08-2009, 06:46 PM

Quote:

Originally Posted by SSTony

I just installed the front. i will do the back when the blackout kit comes in.

Looks good, I think the small SS on drivers side needs to go.JMO

Badger · 12-08-2009, 09:58 PM

Quote:

Originally Posted by jdurhan

Looks good, I think the small SS on drivers side needs to go.JMO

...I think it's supposed to...hope it comes off easy.

The Roc · 12-09-2009, 12:03 AM

Quote:

Originally Posted by SSTony

I just installed the front. i will do the back when the blackout kit comes in.

Can't wait to see how it will look on the rear end!

12-06-2009, 09:53 PM	#22
SSTony Drives: SS Camaro Join Date: Jul 2009 Location: Piscataway NJ Posts: 1,782 View My Garage	__________________

12-08-2009, 05:14 PM	#25
SSTony Drives: SS Camaro Join Date: Jul 2009 Location: Piscataway NJ Posts: 1,782 View My Garage	I just installed the front. i will do the back when the blackout kit comes in. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ZL575 - SLP Camaro 4 Sale	drchevy1	Autos For Sale / Wanted	34	12-09-2009 03:40 PM
DSV CF Rear Spoiler Finished and Color Matched Shift Knobs & Insert (Pictures Inside)	dsvcustoms	Cosmetics and Lighting Modification Discussions	9	09-27-2009 05:30 PM
Tags 2002 Camaro SS FOR SALE (SOLD!)	TAG UR IT	Autos For Sale / Wanted	40	06-23-2009 02:11 AM

12-05-2009, 09:00 PM	#15
55Designs Drives: 2010 Join Date: Sep 2009 Location: Westchester NY Posts: 990	Looks Like il pick one up this week. I bought a spare grill because I want to bond this SLP part in, fill the seams( seams are very visible in all the photos online of this part installed and I HATE IT) with plastic ABS filler and spray the grill satin black and install the modern SS logo.

12-07-2009, 09:41 AM	#23
AntivenomSS I hate snakes! Drives: 2010 Camaro 1SS/RS Join Date: Jul 2009 Location: Oak Lawn, IL Posts: 113 View My Garage	Anyone know the measurements of the pad and the letters? Can't seem to find them listed anywhere on the internet.

12-07-2009, 11:08 PM	#24
ac223mal Drives: car Join Date: Nov 2008 Location: location Posts: 571 View My Garage	Thanks for the additional info and pics, makes perfect sense now.