MRT v1.0 + JBA Shorties? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

mrray13 · 03-13-2010, 01:41 AM

Quote:

Originally Posted by BaylorAirForce

Is this shorty's?

Yep. That's with the shorty JBA over the factory manifolds

JChen · 03-22-2010, 09:46 PM

Headers go on tomorrow! I can't wait to hear how they sound. I'll try to take and post some vids when it's complete.

tmac1granger33 · 03-22-2010, 10:05 PM

Quote:

Originally Posted by JChen

Headers go on tomorrow! I can't wait to hear how they sound. I'll try to take and post some vids when it's complete.

CANT WAIT to hear it!!!!

JChen · 03-23-2010, 01:36 PM

Installed!!!

Loving it so far! On the 5 mile drive home, I've observed that there is definitely a deeper growl to the tone, especially when at idle. Start up is also deeper and fuller. Install took the dealership just around 3.5 hours. I instructed them to use RTV on the stackers as others have done. So far, no CEL. I'll update with more observations over the next few days as scrming has said that the tone will change over time.

All I have is a low quality iPhone video but I don't have/want a youtube account. If you want to see a vid, someone PM me and I'll forward you the mov file and maybe you can embed it in this thread for me?

scrming · 03-23-2010, 03:00 PM

Quote:

Originally Posted by JChen

Installed!!!

Loving it so far! On the 5 mile drive home, I've observed that there is definitely a deeper growl to the tone, especially when at idle. Start up is also deeper and fuller. Install took the dealership just around 3.5 hours. I instructed them to use RTV on the stackers as others have done. So far, no CEL. I'll update with more observations over the next few days as scrming has said that the tone will change over time.

All I have is a low quality iPhone video but I don't have/want a youtube account. If you want to see a vid, someone PM me and I'll forward you the mov file and maybe you can embed it in this thread for me?

Very cool! Give it a few good heat cycles and then give it another good listen!

Xanthos · 03-23-2010, 03:03 PM

Quote:

Originally Posted by JChen

Installed!!!

Loving it so far! On the 5 mile drive home, I've observed that there is definitely a deeper growl to the tone, especially when at idle. Start up is also deeper and fuller. Install took the dealership just around 3.5 hours. I instructed them to use RTV on the stackers as others have done. So far, no CEL. I'll update with more observations over the next few days as scrming has said that the tone will change over time.

All I have is a low quality iPhone video but I don't have/want a youtube account. If you want to see a vid, someone PM me and I'll forward you the mov file and maybe you can embed it in this thread for me?

PM sent.
- X

tmac1granger33 · 03-23-2010, 03:29 PM

mrray13 · 03-23-2010, 05:07 PM

Awesome!! They are cool little headers, that's for sure!!

Eagerly awaiting a vid!!

Xanthos · 03-24-2010, 01:01 PM

Video on Youtube:

- X

SDCamaro10 · 03-24-2010, 01:15 PM

Cant see it.. can someone supply a URL?

Xanthos · 03-24-2010, 01:31 PM

Quote:

Originally Posted by SDCamaro10

Cant see it.. can someone supply a URL?

- X

Edge.128 · 03-24-2010, 02:34 PM

that sounds ok, can't wait to hear more!!

SDCamaro10 · 03-24-2010, 03:16 PM

Quote:

Originally Posted by Xanthos

- X

Thanks!

JChen · 03-24-2010, 03:48 PM

I'll try to get "better" iPhone vids but I'm liking the sound more and more. Believe it or not, I now like the cold start tone. It has what I can only poetically describe as a "rolling gurgle" to it. Idle and low RPMs are awesome. Much more defined than the MRT by itself.

Thanks to Xanthos for embedding the vid!

03-22-2010, 09:46 PM	#16
JChen Drives: 2010 SIM 1LT RS Join Date: Aug 2009 Location: Rockford, MI Posts: 313	Headers go on tomorrow! I can't wait to hear how they sound. I'll try to take and post some vids when it's complete. __________________ In: Airaid CAI Out: JBA Shorty Headers, MRT Axle-back Exhaust v1.0 Tuned by Trifecta

03-23-2010, 01:36 PM	#18
JChen Drives: 2010 SIM 1LT RS Join Date: Aug 2009 Location: Rockford, MI Posts: 313	Installed!!! Loving it so far! On the 5 mile drive home, I've observed that there is definitely a deeper growl to the tone, especially when at idle. Start up is also deeper and fuller. Install took the dealership just around 3.5 hours. I instructed them to use RTV on the stackers as others have done. So far, no CEL. I'll update with more observations over the next few days as scrming has said that the tone will change over time. All I have is a low quality iPhone video but I don't have/want a youtube account. If you want to see a vid, someone PM me and I'll forward you the mov file and maybe you can embed it in this thread for me? __________________ In: Airaid CAI Out: JBA Shorty Headers, MRT Axle-back Exhaust v1.0 Tuned by Trifecta Last edited by JChen; 03-23-2010 at 01:46 PM.

03-24-2010, 01:01 PM	#23
Xanthos PWA Relapse Drives: Formerly-Stick Join Date: Mar 2008 Location: Oklahoma Posts: 12,588 View My Garage	Video on Youtube: - X __________________ 2017 1LT/RS A8 Hyper Blue Metallic

03-24-2010, 01:15 PM	#24
SDCamaro10 Drives: 2010 Camaro 1LT RJT Join Date: Feb 2010 Location: San Diego, CA Posts: 1,951	Cant see it.. can someone supply a URL? __________________

03-24-2010, 03:48 PM	#28
JChen Drives: 2010 SIM 1LT RS Join Date: Aug 2009 Location: Rockford, MI Posts: 313	I'll try to get "better" iPhone vids but I'm liking the sound more and more. Believe it or not, I now like the cold start tone. It has what I can only poetically describe as a "rolling gurgle" to it. Idle and low RPMs are awesome. Much more defined than the MRT by itself. Thanks to Xanthos for embedding the vid! __________________ In: Airaid CAI Out: JBA Shorty Headers, MRT Axle-back Exhaust v1.0 Tuned by Trifecta Last edited by JChen; 03-24-2010 at 05:20 PM.

03-23-2010, 03:29 PM	#21
tmac1granger33 NM HT5 Drives: COTW 3/5/12 Join Date: Jul 2009 Location: los lunas, New Mexico Posts: 1,986 View My Garage

03-23-2010, 05:07 PM	#22
mrray13 Drives: 2010 1LT RS Rally Yellow Join Date: Oct 2009 Location: southern Illinois Posts: 2,973	Awesome!! They are cool little headers, that's for sure!! Eagerly awaiting a vid!!

03-24-2010, 02:34 PM	#26
Edge.128 Drives: 2010 Camaro LS Join Date: Sep 2009 Location: Canada Posts: 1,911	that sounds ok, can't wait to hear more!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 06:56 PM
JBA Performance Headers \| Mid-Pipes \| Exhausts \| V6/V8 \| FREE S&H!!!	AJ@ECSMotorsports	V8 Bolt-Ons & Tunes	100	11-13-2010 04:51 PM
Vendors - Need pricing on JBA and BBK Shorties	flht99b	V8 Bolt-Ons & Tunes	3	03-12-2010 02:16 PM
JBA Shorties coming for V6	HaveBlue	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	62	11-25-2009 01:19 PM
JBA Shorties + MRT Exhausts	deljaso	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	8	11-01-2009 10:13 PM