Boze Injected!!! - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

youngoliver · 05-31-2010, 10:51 PM

Quote:

Originally Posted by highmark

I got the same ones. Very easy to clean . I love the way they black glossed the inner rim so u can wipe it down too. They look great on your ride.

they look great on ur ABM as well!
But easy to clean? i hate tht little puddle on the inner rim haha but that doesn't bother me to much... it's hard to clean the inner rim with those big calipers we got as well ha

highmark · 05-31-2010, 10:57 PM

I see your a big truck guy too. A man with some taste. I reach in behind with a sponge once in a while to get the brake dust off.

Doc · 05-31-2010, 10:57 PM

Quote:

Originally Posted by youngoliver

Ok so here are the Boze "Injected" rims on my 2SS/RS SIM. 20x8.5 in the front 20x10 in the rear...

First, I couldn't be happier with the look of these wheels. I love them

and get even more looks at my car then I used to, Boze did a great job with the design. A+

Second, although thats all fine and dandy.. Boze did let me down and I'm not very satisified with their customer service. I ordered these rims back in late February and got them 3 days ago. They came in once and 1 of the rims had a black scuff on it under the clearcoat

... we sent it back then it came back without the "black" but still a scuff were the mark was originally. Sent them back again and finally got a good wheel.

I couldn't seem to understand how they could let out their product like that when they speak so highly of it??? Plus the countless times they said it was being shipped and never did.... F-
Also I was told by my installer that these rims did not fit the air pressure sensor which goes along the inside of the wheel very well. Holes were drilled to small and it barely fit through... so much that when I need new rubber i must remember to tell them to break it off on the other side of the valve stem or it will bust the pressure sensor and I will have to buy all new ones..

C+

That was my experience with Boze ... and yes I love the wheel but don't like the poor treatment i got over and over. At least my car looks good

Attachment 131590
Attachment 131591
Attachment 131593
Attachment 131594

That is a GREAT looking style and the combo with your car looks just beautiful! They compliment the color perfectly. Just lower it about 1.5 inches and your car will look perfect.

youngoliver · 05-31-2010, 11:13 PM

Quote:

Originally Posted by highmark

I see your a big truck guy too. A man with some taste. I reach in behind with a sponge once in a while to get the brake dust off.

very nice ride im not a camper shell guy tho haha..

and what is that little blue notch where the rivits are in the first pik?

hubcap · 05-31-2010, 11:14 PM

Looking Goooooooooooooooooood!!!

highmark · 06-01-2010, 07:29 AM

That is the air cap. Gotta color match that still. The shell is for the dogs, so they don't fly out. I think these rims accent your SIM perfectly. They are pricey. Alot of people don't even notice I changed them. Here is a pic the day I got them, before I did any other mods.

Ltdodge · 06-01-2010, 07:54 AM

those look sweet!!!!

adub · 06-01-2010, 08:00 AM

Quote:

Originally Posted by Nine Ball

One of the best designs out there right now, sorry to hear Boze gave you some issues. I have a customer with the exact same wheels on order right now. Lower that car and they will look even more amazing!

Tony

Very excited now that I have seen pics on the car. O/P wheels look great. Sure hope mine arrive a bit quicker than 4 months....

BozFour · 06-01-2010, 08:09 AM

Thats a good looking wheel guys

youngoliver · 06-01-2010, 05:41 PM

Quote:

Originally Posted by highmark

That is the air cap. Gotta color match that still. The shell is for the dogs, so they don't fly out. I think these rims accent your SIM perfectly. They are pricey. Alot of people don't even notice I changed them. Here is a pic the day I got them, before I did any other mods.

ohh my air cap is on the inner rim..

and thanks to every1 for the compliments... love to hear what you guys think

GearheadSS · 06-01-2010, 10:46 PM

Those would look killer if it didn't have the rivets on them. I hate that on wheels.

Nine Ball · 06-02-2010, 12:35 PM

Quote:

Originally Posted by MorphWS6

Those would look killer if it didn't have the rivets on them. I hate that on wheels.

If you order them in 2-piece (only sizes 20x8.5 and 20x10.0) we can get them without the hardware. That is the beauty of "custom" wheels, they are custom built to whatever you want and can afford

Badger · 06-06-2010, 07:42 AM

Quote:

Originally Posted by highmark

That is the air cap. Gotta color match that still. The shell is for the dogs, so they don't fly out. I think these rims accent your SIM perfectly. They are pricey. Alot of people don't even notice I changed them. Here is a pic the day I got them, before I did any other mods.

Highmark.....what size tire's are on there front and rear? oops I see 275 front in the 1st pic...and have you lowered it?

highmark · 06-06-2010, 09:06 PM

275/305 , not lowered yet. I can't decide on the lowering. Sometimes I like the lowered look , sometimes I don't.

05-31-2010, 10:57 PM	#16
highmark Burnin out! Drives: Sick SS Join Date: Apr 2010 Location: Flyin by Posts: 194 View My Garage	I see your a big truck guy too. A man with some taste. I reach in behind with a sponge once in a while to get the brake dust off. Attached Images

06-01-2010, 07:29 AM	#20
highmark Burnin out! Drives: Sick SS Join Date: Apr 2010 Location: Flyin by Posts: 194 View My Garage	That is the air cap. Gotta color match that still. The shell is for the dogs, so they don't fly out. I think these rims accent your SIM perfectly. They are pricey. Alot of people don't even notice I changed them. Here is a pic the day I got them, before I did any other mods. Attached Images

06-01-2010, 07:54 AM	#21
Ltdodge Drives: 2008 Z06 Join Date: Apr 2009 Location: Oviedo, Florida Posts: 891	those look sweet!!!! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Redline Motorsports Fuel Injected Car show June 27th!	Redline Motorsports	USA - New England	23	06-27-2010 03:43 PM
My new Boze Speedster wheels!!!	imsuperdave	Wheels and Tires Talk Sponsored by The Tire Rack	18	05-13-2010 11:24 PM
Boze Forged Grip wheels, brushed centers Cyber Grey accent's	Davenport	Wheels and Tires Talk Sponsored by The Tire Rack	18	04-29-2010 10:38 PM
Baer Brakes, Nickle finish with black lettering, Pfadt sport suspension, Boze wheels.	Davenport	Suspension / Brakes / Chassis	5	04-28-2010 04:54 PM
Boze Forged Tach wheels, 20"X9" & 20"X10.5"	Davenport	Wheels / Tires	21	01-22-2010 10:11 PM

05-31-2010, 11:14 PM	#19
hubcap Drives: 2010 VR 2SS/RS Join Date: Dec 2009 Location: West Virginia Posts: 225	Looking Goooooooooooooooooood!!!

06-01-2010, 08:09 AM	#23
BozFour Commander Drives: 2010 2SS Black Join Date: May 2010 Location: Destin,FL Posts: 240	Thats a good looking wheel guys

06-01-2010, 10:46 PM	#25
GearheadSS Drives: 23 LT1/86 IROC-Z Join Date: Jun 2006 Location: Greenville, Tx Posts: 5,050 View My Garage	Those would look killer if it didn't have the rivets on them. I hate that on wheels.

06-06-2010, 09:06 PM	#28
highmark Burnin out! Drives: Sick SS Join Date: Apr 2010 Location: Flyin by Posts: 194 View My Garage	275/305 , not lowered yet. I can't decide on the lowering. Sometimes I like the lowered look , sometimes I don't.