Adding a ZL1 front end to your car. - Page 218 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Synner · 07-07-2015, 04:14 PM

Cheaper than a full 14 conversion with Z28 splitter but still improved cooling and downforce.

45th SS · 07-07-2015, 08:39 PM

Could someone send me the Link to the install instructions, please.

bigwayne3000 · 08-14-2015, 10:46 AM

Tried reading through but just incredibly difficult at over 100 pages... I keep seeing "lines" mentioned though and how they don't match up. Would anyone have a picture of this vs ones that do so I can visualize what it is everyone is referring to?

Also, if I purchase a used bumper which has a broken rivet/screw hole on the fender side of the bumper where the 2 attach, is this easily fixable by possibly just drilling out a new hole or no?

MGD · 08-14-2015, 05:37 PM

Here you go.
http://www.camaro5.com/forums/showpo...31&postcount=8

bigwayne3000 · 08-15-2015, 12:54 PM

Quote:

Originally Posted by MGD

Here you go.
http://www.camaro5.com/forums/showpo...31&postcount=8

Thank you for this! What is the fix, to build up the sides to match where it is higher on the bumper or do they shave it down instead to bring it lower?

MGD · 08-15-2015, 02:28 PM

You need to sand it down to match the hood lines, or you put a ZL1 hood on like I did.

Cheetoh · 01-05-2016, 04:52 PM

Quote:

Originally Posted by MValdez17

I hate when hoods come in like that.

Checked all the wiring today all 4 lights are lighting up! Thank you for both harnesses! You made it easy!
Also installed the brake coolers onto the lower grille. Monday I will put the car on the lift and see how the fitting goes for the lower air deflector/belly pan. Hoping to have everything painted on Friday. Pictures to follow!!

Picture of first part of brake coolers on the grille.
I attached some pictures of my P13 Plasmas. Instead of cutting the female connecter, I cut the bulb connector one it was pretty easy.

How Do the Brake Ducts attach to the Grille? What Screws are used to Put the Brake Ducts together?

hammdo · 01-05-2016, 05:23 PM

Need the zl1 lower front

22876562 GM part number

http://www.camaro5.com/forums/showpo...4&postcount=18 list of parts...

-Don

2SSRS@Gen5diy · 01-07-2016, 10:07 AM

Or you can save and cut your old one like this.

2SSRS@Gen5diy · 01-07-2016, 10:10 AM

Quote:

Originally Posted by Cheetoh

How Do the Brake Ducts attach to the Grille? What Screws are used to Put the Brake Ducts together?

They snap in on 2 sides, and then use a 7 MM screw, use the same scrows for the Brake Ducts together and on the inner finder liner.

hammdo · 01-07-2016, 01:17 PM

Does the ZL1 belly pan work with the SS lower shroud? I bought the ZL1 lower so everything lined up including the belly pan (that I bought from Ofer ;o)...

-Don

Cheetoh · 01-10-2016, 11:25 AM

Quote:

Originally Posted by hammdo

Need the zl1 lower front

22876562 GM part number

http://www.camaro5.com/forums/showpo...4&postcount=18 list of parts...

-Don

Hammdo, Is that the Air Temp Sensor you have mounted on the ZL1 Radiator Air inlet??

hammdo · 01-10-2016, 06:16 PM

OAT (Outside Air Temp) sensor -- it was the same one that was on the 'stock' lower -- I just remounted it...

-Don

Cheetoh · 01-17-2016, 01:04 PM

I got my ZL1 Bumper today, I did not get any of the Plastic Rivets for the Top Trim pieces or for the Fender Extensions. Cam I just go to Harbor Freight or someplace and buy some plastic rivets that will work?

07-07-2015, 08:39 PM	#3040
45th SS Drives: 2012 45th anniversary SS Join Date: Jul 2012 Location: Cabot,Arkansas Posts: 52	Could someone send me the Link to the install instructions, please. __________________ 45th Anniversary. Borla LT(catless), Borla S type, CAI intake and Rhino79 installed whipple 2.9L, alky meth kit, 102mm throttle body , GPI tune, VVT custom competition cam, 416ci stroker, forged internals.

08-14-2015, 05:37 PM	#3042
MGD Drives: 16 Camaro SS Join Date: Jul 2012 Location: Menifee Posts: 820	Here you go. http://www.camaro5.com/forums/showpo...31&postcount=8 __________________ Interior: Adrenaline Red. SS/2SS, M6, NPP, Sun Roof, 8" Nav. Black 5 Spoke Wheels.

08-15-2015, 02:28 PM	#3044
MGD Drives: 16 Camaro SS Join Date: Jul 2012 Location: Menifee Posts: 820	You need to sand it down to match the hood lines, or you put a ZL1 hood on like I did. __________________ Interior: Adrenaline Red. SS/2SS, M6, NPP, Sun Roof, 8" Nav. Black 5 Spoke Wheels.

01-05-2016, 05:23 PM	#3046
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	Need the zl1 lower front 22876562 GM part number http://www.camaro5.com/forums/showpo...4&postcount=18 list of parts... -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

01-07-2016, 01:17 PM	#3049
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	Does the ZL1 belly pan work with the SS lower shroud? I bought the ZL1 lower so everything lined up including the belly pan (that I bought from Ofer ;o)... -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

07-07-2015, 04:14 PM	#3039
Synner Drives: cars Join Date: May 2011 Location: Oversneeze Posts: 4,542	Cheaper than a full 14 conversion with Z28 splitter but still improved cooling and downforce.

08-14-2015, 10:46 AM	#3041
bigwayne3000 Drives: 2011 Camaro LS Join Date: Sep 2008 Location: NJ Posts: 1,917	Tried reading through but just incredibly difficult at over 100 pages... I keep seeing "lines" mentioned though and how they don't match up. Would anyone have a picture of this vs ones that do so I can visualize what it is everyone is referring to? Also, if I purchase a used bumper which has a broken rivet/screw hole on the fender side of the bumper where the 2 attach, is this easily fixable by possibly just drilling out a new hole or no?

01-10-2016, 06:16 PM	#3051
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	OAT (Outside Air Temp) sensor -- it was the same one that was on the 'stock' lower -- I just remounted it... -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

01-17-2016, 01:04 PM	#3052
Cheetoh Drives: 2011 Callaway SC572, 2000 Firehawk Join Date: Nov 2009 Location: Irving, TX Posts: 465	I got my ZL1 Bumper today, I did not get any of the Plastic Rivets for the Top Trim pieces or for the Fender Extensions. Cam I just go to Harbor Freight or someplace and buy some plastic rivets that will work? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	67	11-27-2024 09:02 AM
Gran Turismo 5 November 24th, 2010	Nezacant	Gaming Lounge	562	04-21-2011 10:23 PM
Winner, winner - Jalopnik compares the Big 3	Number 3	5th Gen Camaro SS LS LT General Discussions	31	04-17-2011 04:24 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 06:20 PM
#4768 - Delivered and Made Ready the Right Way!	Number_9	5th Gen Camaro SS LS LT General Discussions	62	07-16-2009 03:42 AM