2014 Heat extractor on a 2010 hood - Page 22 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

1985airborne · 09-20-2014, 07:51 PM

Ok guys I cut the hole in my hood but I did have to trim the extractor for the blower so it wouldn't touch...I'm post pics soon...

1985airborne · 09-21-2014, 02:32 AM

I suggest that cutting the 16 3/8 should be backedup 2 -3in due to the blower sitting higher than a NA setup. I did have to trim the inner extractor because the HE was resting on the TB and CAI...I will replace this with racing mesh from www.racingmesh.com.

Anaconda · 09-22-2014, 06:32 AM

Still debating on doing this mod. Not sure if it would clash with my stripes or too much going on. I have a victory red with black stripes. Ugh I go back and forth with it. So far everyone's looks good.

chozn4service · 09-22-2014, 07:28 AM

I think it would look bad ass personally. I don't have stripes but will sooner or later and going with black stripes and the grill is black will make it pretty much unnoticeable in my opinion. I did it for function, not visual enhancing. Just my .02 cents.

Sent from my iPhone using Tapatalk

mojatto · 09-26-2014, 02:15 AM

i had found, for air/water deflector, a different GM part n. 22864002.

is it different from GM part. 23180572 ?

ilirg · 09-28-2014, 12:54 PM

I'm going to tackle this project this week. Can someone who used the longer hardware bolts to go through the extractor and drip tray confirm the sizes I need to be getting? Thanks!

KaBoom1701 · 09-28-2014, 01:42 PM

I think this will be my last exterior mod before I go IPF S/C....

Just need to order parts now.

hammdo · 09-28-2014, 02:46 PM

Quote:

Originally Posted by chozn4service

I really love this mod! I wanted something to get the heat out since I've added headers to the car. As I stated before, I had HEX Vents on my previous car and for what they do to extract heat and to relieve that pressure along the front bumper to keep the car stable at speed is really a must.
This mod does just that. I literally see the heat pouring out from the vent. Cool air coming in through the grill and hot air being pushed out. The rain tray in place as not to get the motor wet, funneling the water out by the radiator. Yes, this is the mod to do and it still looks OEM.
I may get the mail slot delete next as I had it on the previous car and like it as well.

I did the hex vents this weekend and love them. I too am looking for mail slot delete. Would appreciate any details/info. Thanks!

-Don

Eddiefuzz · 09-28-2014, 03:55 PM

Quote:

Originally Posted by ilirg

I'm going to tackle this project this week. Can someone who used the longer hardware bolts to go through the extractor and drip tray confirm the sizes I need to be getting? Thanks!

Just get Toilet bolts, take the extractor with you to the hardware store. The head of the bolt should "Snap" right into the slot that the little OEM bolts comes out of. What part of Jersey are you in??

ilirg · 09-28-2014, 04:37 PM

North Jersey, thanks will head over to homies tomorrow. Been putting this project off for too long!

Jerry7297 · 09-30-2014, 10:35 AM

Quote:

Originally Posted by ilirg

North Jersey, thanks will head over to homies tomorrow. Been putting this project off for too long!

You will love it. Coolest exterior mod I have done.

blake-b · 10-01-2014, 02:54 AM

Can someone do me a favor? I have an MPD1 cowl hood. Because of it's added height, the cowl extends farther over the windshield than the factory hood. I know the measurement from the rear of the factory hood is 16 3/8 to 16 1/2. Since my length is different and I don't have the stock hood anymore to compare, can someone measure from the point at the front of the hood to the leading point of the insert?

That should give me factory placement. I may end up moving it farther back depending on how it looks.

I took the liberty of using one of the OP's pics to show the distance I need in case it was unclear.

Please and thank you.

chozn4service · 10-01-2014, 07:40 AM

10" on mine

Sent from my iPhone using Tapatalk

blake-b · 10-01-2014, 07:49 AM

Quote:

Originally Posted by chozn4service

10" on mine

Sent from my iPhone using Tapatalk

Thank you!

09-20-2014, 07:51 PM	#295
1985airborne One Slow Automatic Drives: 2017 GS 2010 CAMARO SS Join Date: Mar 2010 Location: NC NJ NY DMV THE BAYAREA Posts: 877	Ok guys I cut the hole in my hood but I did have to trim the extractor for the blower so it wouldn't touch...I'm post pics soon... __________________ 650HP 2010 CAMARO SS 710HP 2017 GRAND SPORT

09-21-2014, 02:32 AM	#296
1985airborne One Slow Automatic Drives: 2017 GS 2010 CAMARO SS Join Date: Mar 2010 Location: NC NJ NY DMV THE BAYAREA Posts: 877	I suggest that cutting the 16 3/8 should be backedup 2 -3in due to the blower sitting higher than a NA setup. I did have to trim the inner extractor because the HE was resting on the TB and CAI...I will replace this with racing mesh from www.racingmesh.com. Attached Images __________________ 650HP 2010 CAMARO SS 710HP 2017 GRAND SPORT

09-22-2014, 06:32 AM	#297
Anaconda Drives: 2013 Camaro 1SS 6-speed VR Join Date: Mar 2008 Location: Somewhere nice and cool Posts: 303 View My Garage	Still debating on doing this mod. Not sure if it would clash with my stripes or too much going on. I have a victory red with black stripes. Ugh I go back and forth with it. So far everyone's looks good. __________________ 2013 Victory Red 1SS 6-speed w/ black stripes ordered 8/15/12 Delivered 10/2/2012! Corsa ZL1 catback exhaust, Black CAI intake with scoop and washer bottle relocation

09-22-2014, 07:28 AM	#298
chozn4service Drives: 2016 SS w/2SS A8 Blue Velvet Join Date: Dec 2009 Location: 39.793153,-86.238223 Posts: 3,678 View My Garage	I think it would look bad ass personally. I don't have stripes but will sooner or later and going with black stripes and the grill is black will make it pretty much unnoticeable in my opinion. I did it for function, not visual enhancing. Just my .02 cents. Sent from my iPhone using Tapatalk __________________ Never grow up, it's a trap!

09-28-2014, 01:42 PM	#301
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,631	I think this will be my last exterior mod before I go IPF S/C.... Just need to order parts now. __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

09-26-2014, 02:15 AM	#299
mojatto Drives: 2019 Camaro 2.0T (European version) Join Date: Nov 2010 Location: Sicily Posts: 52 View My Garage	i had found, for air/water deflector, a different GM part n. 22864002. is it different from GM part. 23180572 ?

09-28-2014, 12:54 PM	#300
ilirg Drives: 2011 Camaro 2ss Join Date: May 2013 Location: nj Posts: 1,559	I'm going to tackle this project this week. Can someone who used the longer hardware bolts to go through the extractor and drip tray confirm the sizes I need to be getting? Thanks!

09-28-2014, 04:37 PM	#304
ilirg Drives: 2011 Camaro 2ss Join Date: May 2013 Location: nj Posts: 1,559	North Jersey, thanks will head over to homies tomorrow. Been putting this project off for too long!

10-01-2014, 02:54 AM	#306
blake-b Drives: 2009 ZR1 Join Date: May 2010 Location: KCMO Posts: 3,205	Can someone do me a favor? I have an MPD1 cowl hood. Because of it's added height, the cowl extends farther over the windshield than the factory hood. I know the measurement from the rear of the factory hood is 16 3/8 to 16 1/2. Since my length is different and I don't have the stock hood anymore to compare, can someone measure from the point at the front of the hood to the leading point of the insert? That should give me factory placement. I may end up moving it farther back depending on how it looks. I took the liberty of using one of the OP's pics to show the distance I need in case it was unclear. Please and thank you. Attached Images

10-01-2014, 07:40 AM	#307
chozn4service Drives: 2016 SS w/2SS A8 Blue Velvet Join Date: Dec 2009 Location: 39.793153,-86.238223 Posts: 3,678 View My Garage	10" on mine Sent from my iPhone using Tapatalk __________________ Never grow up, it's a trap!