Adding a ZL1 front end to your car.

[sene]

Originally Posted by blownlsx427

Did you reuse the stock lower support? is that just the facsia installed?

thx for posting your progress

Its just the front facia, didn't install the stock lower support. Like I said it fits like a glove, its like it was meant to be on this car. I'm waiting for the front lip to get released by GM to see what I do about the lower support.

[sene]

Next step is figuring how to set-up the lights. Main reason I wanted this bumper was for the dual fog lights. I'm thinking an amber fog projector and a white driving light for driving through the mountains at night.

Ofer - have you done any work with the stock light / fog light switch to see if it can be modified to work with aftermarket fogs?

[The Stig]

Originally Posted by blownlsx427

Did you reuse the stock lower support? is that just the facsia installed?

thx for posting your progress

Originally Posted by sene

Its just the front facia, didn't install the stock lower support. Like I said it fits like a glove, its like it was meant to be on this car. I'm waiting for the front lip to get released by GM to see what I do about the lower support.

Well it's the top half of the front fasica. I don't think they have released the lower portion yet.

[Ray@RDS]

I believe the lower facsia was released last week. I have all parts for the bumper swap on my ss ordered. And I believe most if not all should be here this week. My parts guy is still working on the hood and insert, along with skirts and rear spoiler.

[2SSRS@Gen5diy]

Originally Posted by sene

Next step is figuring how to set-up the lights. Main reason I wanted this bumper was for the dual fog lights. I'm thinking an amber fog projector and a white driving light for driving through the mountains at night.

Ofer - have you done any work with the stock light / fog light switch to see if it can be modified to work with aftermarket fogs?

You will need to get the fog light that is on my list, It uses a H11 bulb so if you can get an amber that will work with the front fog/DRL harness i posted the number for.

I will have a Plug and Play adapter harness this week, have the parts on the way, to make the first 20 sets.

Originally Posted by stieger

Well it's the top half of the front fasica. I don't think they have released the lower portion yet.

Originally Posted by blownlsx427

I believe the lower facsia was released last week. I have all parts for the bumper swap on my ss ordered. And I believe most if not all should be here this week. My parts guy is still working on the hood and insert, along with skirts and rear spoiler.

Not the grill but the right support behind the bumper and lower support where released.

[sene]

Originally Posted by 2SSRS

You will need to get the fog light that is on my list, It uses a H11 bulb so if you can get an amber that will work with the front fog/DRL harness i posted the number for.

I will have a Plug and Play adapter harness this week, have the parts on the way, to make the first 20 sets.

Ofer, I have the LS so no factory fog lights. I don't think your harness will work for me.

[khislop007]

Originally Posted by sene

My camaro's grand debut on the internet...

I'll be driving it around this way for the week, and on Friday she goes into paint. My camaro LS is having an identity crisis. ZL1 front end, halos, leather interior, suede door and dash trim, RS rims.

Looks good. Seems like it lines up with the v6 better. Can't wait to see it painted and all finished up.

[2SSRS@Gen5diy]

LOL, it will, all you need to tell me at the time you order how you want it to work.

Its only wiring its not hard.

[sene]

Originally Posted by 2SSRS

LOL, it will, all you need to tell me at the time you order how you want it to work.

Its only wiring its not hard.

Haha I pretty sure you were born with a soldering iron in your hand. I'll shoot you a PM with what I want (fog, driving lights, halos) and you can work your magic and cook something up.

[Synerbee]

I was wondering if someone could tell me how much all the parts cost together. I tried using gmpartshouse/gmpartsdirect but both did not have most of the parts. Also any updates on parts that essential for this? I am very interested, but guessing the cost will be out of my budget

[Synerbee]

Originally Posted by hgjhkg946fiyd

You know the price depends on the dealer you get the parts from, Some are cheap but get you on shipping and some are good all the way around, but not all the list price is out at the moment.
__________________

That is true. Hopefully it will be cheap as online "probably not" or ill order online

Sent from my Droid using Tapatalk

[SamHouseIII]

Originally Posted by sene

My camaro's grand debut on the internet...

I'll be driving it around this way for the week, and on Friday she goes into paint. My camaro LS is having an identity crisis. ZL1 front end, halos, leather interior, suede door and dash trim, RS rims.

Sweet!!!

[chevy 3]

I'm soooo torn between the t3 z28 nose and the zl1 nose. I'm almost thinking the zl1 nose will be cheaper. The t3 is 1500.00 no paint. I'm going to haveta decide soon. Decisions decisions.......

[f5journal]

This cowl line fitment thing will require material to be removed from the bumper. Do we think the moulding is thick enough to accomodate this without "grinding through"