camshaft for v6 camaro - Page 25 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

puertoricanfont · 03-16-2012, 01:49 PM

Quote:

Originally Posted by KMPrenger

It sounded good, but not quite what i was expecting...not sure if that was because of the mic on the camera of the exhaust on the car.

I'm thinking with some of the set ups guys on here have, it would sound killer!

definately agree. Waiting how it will sound with the guys who have LT's with no cats and mrtv2.

.

MACE_ENG · 03-17-2012, 01:15 AM

Quote:

Originally Posted by bmorecam

Looking great steve!!

10-13% airflow improvement with just cams sound very promising

I'm sure the tune will be sorted out very soon too.

I hope so!

Quote:

Originally Posted by KMPrenger

That much more airflow does sound good...keep up the great work!

Only a matter of time before we have a nearly or at 400 crank HP N/A V6 here.

Thanks KMPrenger

Considering 10rwhp shy of the 400hp at the engine mark (approx) I think the new frontier will be 500hp NA

Quote:

Originally Posted by bmorecam

steve, do you know what are the rpm based air flow? 10-13% of extra flow from cams and completely reworked head might make a very good combo and way better than I had hoped for. I might just have to stick with my original n/a plan!

Good question, I'll chase this up.

Quote:

Originally Posted by KMPrenger

It sounded good, but not quite what i was expecting...not sure if that was because of the mic on the camera of the exhaust on the car.

I'm thinking with some of the set ups guys on here have, it would sound killer!

The clip was taken with a 4S iPhone. The camera quality is excellent, but the mic definitely isn't as good. The clip was also sadly taken in a garage which isn't ideal :(

In saying this though, more clips will certainly follow

Blade · 03-17-2012, 08:46 AM

Ladies and Gentlemen meet Steve @ Mace Engineering.....the Mic Dundee of the aftermarket....

"You like that insulator ehhh?.....check out me cams! G'day Mate!"

hapisok · 03-17-2012, 10:37 AM

Quote:

Originally Posted by Blade

Ladies and Gentlemen meet Steve @ Mace Engineering.....the Mic Dundee of the aftermarket....

"You like that insulator ehhh?.....check out me cams! G'day Mate!"

you crack me up bro...

bmorecam · 03-17-2012, 10:51 AM

Blade had too much of that goodie good dood yesterday... he steady roller skating

TJ91 · 03-17-2012, 12:18 PM

ROFL!!!! hahahahahahaa I actually started dieing!

MACE_ENG · 03-18-2012, 08:08 AM

Was not expected on sooo many levels

Nice one nonetheless

LOL

MACE_ENG · 03-18-2012, 08:13 AM

May have a speedway car in the works, with these cams. The only difference is that this customer won't be afraid to buzz the LLT to 9,00RPM, plus it will be running an aftermarket computer

Looking at this or either persevering with his current L67, hoping he goes LLT though

LOL

TJ91 · 03-18-2012, 01:08 PM

Quote:

Originally Posted by MACE_ENG

May have a speedway car in the works, with these cams. The only difference is that this customer won't be afraid to buzz the LLT to 9,00RPM, plus it will be running an aftermarket computer

Looking at this or either persevering with his current L67, hoping he goes LLT though

LOL

Ice Demon · 03-18-2012, 01:22 PM

Quote:

Originally Posted by MACE_ENG

May have a speedway car in the works, with these cams. The only difference is that this customer won't be afraid to buzz the LLT to 9,00RPM, plus it will be running an aftermarket computer

Looking at this or either persevering with his current L67, hoping he goes LLT though

LOL

Nice just like I was hoping 9k red line

FaytalsCamaro · 03-20-2012, 05:54 PM

Oh no you don't!! This thread will not leave the first page. Anticipation continues to build!

Midlife Crisis · 03-20-2012, 08:08 PM

I agree! Good call

MACE_ENG · 03-20-2012, 11:24 PM

Nice

In regards to the progress of this thing still waiting on the tuning God's to get back to us :(

Midlife Crisis · 03-22-2012, 07:44 PM

Than I'm going to Church to say a prayer.

03-17-2012, 08:46 AM	#339
Blade Drives: 2016 Camaro 2SS BVM Join Date: Dec 2009 Location: Charlotte Posts: 4,689 View My Garage	Ladies and Gentlemen meet Steve @ Mace Engineering.....the Mic Dundee of the aftermarket.... "You like that insulator ehhh?.....check out me cams! G'day Mate!" __________________ Formerly owner of: 2012 2SS/RS Build Thread - Totaled by red light runner 2010 LT/RS Build Thread - Traded in for 2012 2SS 2007 Acura TSX 1992 Oldsmobile Achieva V6 1992 Mercury Sable

03-17-2012, 12:18 PM	#342
TJ91 :chevy: Drives: 2LT/RS Join Date: Jun 2008 Location: Toronto Posts: 13,035	ROFL!!!! hahahahahahaa I actually started dieing! __________________ CAMARO Consult your doctor before taking Camaro Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help CAMARO Bringing excitment back into the Garage

03-20-2012, 08:08 PM	#348
Midlife Crisis Drives: 2LT/RS Join Date: May 2011 Location: Maryland Posts: 58	I agree! Good call __________________ Injen CAI, JBA Shorty, MRV2, Vmax Throttle Boby,Mace 25MM,Ported Manifold,3.73 Gears,Barton Shifter.

03-22-2012, 07:44 PM	#350
Midlife Crisis Drives: 2LT/RS Join Date: May 2011 Location: Maryland Posts: 58	Than I'm going to Church to say a prayer. __________________ Injen CAI, JBA Shorty, MRV2, Vmax Throttle Boby,Mace 25MM,Ported Manifold,3.73 Gears,Barton Shifter.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Automobile Reviews 2011 Chevrolet Camaro Convertible 2SS	Tran	Camaro Convertible Forum	33	07-28-2011 08:36 PM
Installation Camaro Needed for Manual for a Justice Install Package in SF Bay Area	Info@PeddersUSA.com	USA - California	6	04-30-2010 09:02 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Ambient lighting (ABL) - the FINAL update = LIMITED TO DOOR PANELS	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	338	04-15-2009 06:33 PM

03-17-2012, 10:51 AM	#341
bmorecam Account Suspended Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011 Location: CYBERGMONSTER@GMAIL.COM Posts: 3,658 View My Garage	Blade had too much of that goodie good dood yesterday... he steady roller skating

03-18-2012, 08:08 AM	#343
MACE_ENG Drives: LLT Machine Join Date: Nov 2011 Location: VIC/AUS Posts: 563	Was not expected on sooo many levels Nice one nonetheless LOL

03-18-2012, 08:13 AM	#344
MACE_ENG Drives: LLT Machine Join Date: Nov 2011 Location: VIC/AUS Posts: 563	May have a speedway car in the works, with these cams. The only difference is that this customer won't be afraid to buzz the LLT to 9,00RPM, plus it will be running an aftermarket computer Looking at this or either persevering with his current L67, hoping he goes LLT though LOL

03-20-2012, 05:54 PM	#347
FaytalsCamaro Distributor of Liquor Drives: My Wife Crazy Join Date: Aug 2011 Location: Oklahoma Posts: 1,697	Oh no you don't!! This thread will not leave the first page. Anticipation continues to build!

03-20-2012, 11:24 PM	#349
MACE_ENG Drives: LLT Machine Join Date: Nov 2011 Location: VIC/AUS Posts: 563	Nice In regards to the progress of this thing still waiting on the tuning God's to get back to us :(