V8 bolt on help desk! Now available!! - Page 263 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

thahemp · 07-02-2013, 03:51 PM

Hell yeah! It's highly maneuverable, and really annoying at the same time!

axis · 07-02-2013, 03:55 PM

So can we cut up in here too, or do we get our peepee's whacked for going off topic too much?

thahemp · 07-02-2013, 04:04 PM

I get the feeling they still want us to keep it within reason.

litle88 · 07-02-2013, 04:31 PM

I think they joined them both for a lil of both but this time more towards topics.

Speaking of topics I just got this email from Tick performance.
Beware of Cheap Knock-Offs
..and second-rate copies of our products being sold as genuine!
Protecting our customers (past, present and future) from fraud is something that we're dedicated to here at Tick Performance. Unfortunately, we discovered this week that Hawks Third Generation in Easley, SC has been selling "knock-off" or copied Adjustable Master Cylinder Kits sold as genuine Tick Performance products illegally for at least the past year. They're removing the Tick Performance name from their website and all marketing materials now, but for many, the damage has already been done.

Aside from not receiving the product that you believed you were buying, if you purchased an Adjustable Master Cylinder Kit from Hawks Third Generation, our Lifetime Warranty that we've become known for on these kits does not apply to your purchase, unfortunately. What can you do? We've compiled more information on our website:

TBone · 07-02-2013, 04:31 PM

Quote:

Originally Posted by axis

Slap him hell, this justifies a deep cavity search.

Quote:

Originally Posted by mikeyg36

Zeke would like that

Quote:

Originally Posted by axis

He can use Hemps squeaky monkey toe.

Quote:

Originally Posted by thahemp

Hell yeah! It's highly maneuverable, and really annoying at the same time!

When dealing with IL Politicians and Cavity searches, these are the gloves you will need...

They are used to getting themselves into some deep shit.

Just look at how many former IL Politicians are in Jail. Hell just our Governors alone have their own wing in the Penitentiary.

Sorry, way

.

CAMSHAFT!!!!!

T.

axis · 07-02-2013, 04:36 PM

Quote:

Originally Posted by TBone

When dealing with IL Politicians and Cavity searches, these are the gloves you will need...

They are used to getting themselves into some deep shit.

Just look at how many former IL Politicians are in Jail. Hell just our Governors alone have their own wing in the Penitentiary.

Sorry, way

.

CAMSHAFT!!!!!

T.

I don't think that glove is long enough for THE MONKEY TOE.

Zekes Lunati voodoo is the da bomb.

TBone · 07-02-2013, 04:42 PM

Quote:

Originally Posted by litle88

I think they joined them both for a lil of both but this time more towards topics.

Speaking of topics I just got this email from Tick performance.
Beware of Cheap Knock-Offs
..and second-rate copies of our products being sold as genuine!
Protecting our customers (past, present and future) from fraud is something that we're dedicated to here at Tick Performance. Unfortunately, we discovered this week that Hawks Third Generation in Easley, SC has been selling "knock-off" or copied Adjustable Master Cylinder Kits sold as genuine Tick Performance products illegally for at least the past year. They're removing the Tick Performance name from their website and all marketing materials now, but for many, the damage has already been done.

Aside from not receiving the product that you believed you were buying, if you purchased an Adjustable Master Cylinder Kit from Hawks Third Generation, our Lifetime Warranty that we've become known for on these kits does not apply to your purchase, unfortunately. What can you do? We've compiled more information on our website:

I wonder if, as a service, a thread shouldn't be started in the transmission section warning folks. Or should we just leave that up to Tick since it is their issue.

Just a thought.

T.

axis · 07-02-2013, 04:44 PM

Quote:

Originally Posted by TBone

I wonder if, as a service, a thread shouldn't be started in the transmission section warning folks. Or should we just leave that up to Tick since it is their issue.

Just a thought.

T.

I think that's a good idea. You should also post that it came from the V8 help desk thread, so we can get some credit for actually doing something in here.

On a side note, is Zeke now sponsored by Tick as well?

litle88 · 07-02-2013, 04:45 PM

Lol that's embarrassing just living in this state!

Ok well my cousin SStodo8 just finished ordering a set of 2" headers from TSP, he will have them sometime next week for our second Morris carshow of the year so he can't wait. Yes I will be doing his install! So I guess then ill start a thread about a header install.

thahemp · 07-02-2013, 04:49 PM

Quote:

Originally Posted by litle88

Lol that's embarrassing just living in this state!

Ok well my cousin SStodo8 just finished ordering a set of 2" headers from TSP, he will have them sometime next week for our second Morris carshow of the year so he can't wait. Yes I will be doing his install! So I guess then ill start a thread about a header install.

Lemme know if it squeaks! I betcha those 2" headers are gonna be real damn close to the steering knuckle unless they bend them different. Mine are almost touching.

litle88 · 07-02-2013, 04:49 PM

Quote:

Originally Posted by axis

I think that's a good idea. You should also post that it came from the V8 help desk thread, so we can get some credit for actually doing something in here.

On a side note, is Zeke now sponsored by Tick as well?

Yes as a matter a fact, Martin and my self became bestest FB friends and he offered me sponsorship. So now I have Lethal, Brian Tooley, Melling, TSP just jumped on lol, what else am I missing? Lol

Tbone, you send the link to those guys over there. Lol

litle88 · 07-02-2013, 04:50 PM

10-4 ill post pics as well LOTS AND LOTS (Axis).

axis · 07-02-2013, 04:50 PM

Quote:

Originally Posted by litle88

Lol that's embarrassing just living in this state!

Ok well my cousin SStodo8 just finished ordering a set of 2" headers from TSP, he will have them sometime next week for our second Morris carshow of the year so he can't wait. Yes I will be doing his install! So I guess then ill start a thread about a header install.

No need unless you're scoring pt's with TSP. Nineball has a good DIY header install conspicuously hidden in the DIY section.

axis · 07-02-2013, 04:52 PM

Quote:

Originally Posted by thahemp

Lemme know if it squeaks! I betcha those 2" headers are gonna be real damn close to the steering knuckle unless they bend them different. Mine are almost touching.

That's the one possible downfall of 2in headers.

Quote:

Originally Posted by litle88

Yes as a matter a fact, Martin and my self became bestest FB friends and he offered me sponsorship. So now I have Lethal, Brian Tooley, Melling, TSP just jumped on lol, what else am I missing? Lol

Tbone, you send the link to those guys over there. Lol

Don't forget K&N

07-02-2013, 03:51 PM	#3669
thahemp Geek Drives: 2012 Black LS3 Join Date: Jan 2012 Location: Derby, KS Posts: 4,343 View My Garage	Hell yeah! It's highly maneuverable, and really annoying at the same time! __________________ 01000111011011110110111101100100001000000110110001 11010101100011011010110010000001110111011010010111 01000110100000100000011101000110100001101001011100 110010000001101111011011100110010100100001 x = ac97968bd3df8f968c8cd3df998a9c94d3df9c8a918bd3df9c 909c94df8c8a9c949a8dd3df92908b979a8ddf998a9c949a8d d3df8b968b8cd1 x = ~x

07-02-2013, 03:55 PM	#3670
axis Search Ninja Drives: 2010 Black 2SS/RS A6 Join Date: Oct 2009 Location: Central Ark Posts: 7,183	So can we cut up in here too, or do we get our peepee's whacked for going off topic too much? __________________ 2010 Black 2SS/RS A6 Halltech CF 102 fed GPI modded intake manifold Bo (knows) White ported TB Kooks LT's/ Dynomax VT Pfadted (springs/sways) Dyno tuned by Rhino and GPI I once parallel parked a train.

07-02-2013, 04:04 PM	#3671
thahemp Geek Drives: 2012 Black LS3 Join Date: Jan 2012 Location: Derby, KS Posts: 4,343 View My Garage	I get the feeling they still want us to keep it within reason. __________________ 01000111011011110110111101100100001000000110110001 11010101100011011010110010000001110111011010010111 01000110100000100000011101000110100001101001011100 110010000001101111011011100110010100100001 x = ac97968bd3df8f968c8cd3df998a9c94d3df9c8a918bd3df9c 909c94df8c8a9c949a8dd3df92908b979a8ddf998a9c949a8d d3df8b968b8cd1 x = ~x

07-02-2013, 04:31 PM	#3672
litle88 V8 Lounge member #2 Drives: 2001 Ws6 Join Date: Sep 2009 Location: Burbank,IL Posts: 6,373	I think they joined them both for a lil of both but this time more towards topics. Speaking of topics I just got this email from Tick performance. Beware of Cheap Knock-Offs ..and second-rate copies of our products being sold as genuine! Protecting our customers (past, present and future) from fraud is something that we're dedicated to here at Tick Performance. Unfortunately, we discovered this week that Hawks Third Generation in Easley, SC has been selling "knock-off" or copied Adjustable Master Cylinder Kits sold as genuine Tick Performance products illegally for at least the past year. They're removing the Tick Performance name from their website and all marketing materials now, but for many, the damage has already been done. Aside from not receiving the product that you believed you were buying, if you purchased an Adjustable Master Cylinder Kit from Hawks Third Generation, our Lifetime Warranty that we've become known for on these kits does not apply to your purchase, unfortunately. What can you do? We've compiled more information on our website: __________________ 2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.

07-02-2013, 04:45 PM	#3677
litle88 V8 Lounge member #2 Drives: 2001 Ws6 Join Date: Sep 2009 Location: Burbank,IL Posts: 6,373	Lol that's embarrassing just living in this state! Ok well my cousin SStodo8 just finished ordering a set of 2" headers from TSP, he will have them sometime next week for our second Morris carshow of the year so he can't wait. Yes I will be doing his install! So I guess then ill start a thread about a header install. __________________ 2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.

07-02-2013, 04:50 PM	#3680
litle88 V8 Lounge member #2 Drives: 2001 Ws6 Join Date: Sep 2009 Location: Burbank,IL Posts: 6,373	10-4 ill post pics as well LOTS AND LOTS (Axis). __________________ 2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.