You are browsing camaro5 
 |
|
07-04-2010, 04:30 AM
|
#3781 | |
      Drives: 10 Procharged SS Join Date: Oct 2009
Location: The creek at the end of the dead end road
Posts: 1,857
|
[QUOTE=paul2010;2054833]
Quote:
Before i left in March i took car to the track and had some still launch photo's taken. Even without a supercharger and running stock rims and tires, but with some mods like CAI, Headers, Corsa, tune and a few others the car's front end almost comes off the ground and you can see how the entire car twists. I hadnt noticed it until you mentioned having the braces for the drag. That made me go back and check out the photo's and sure enough the car twists right off the line. The actual photos are at home and i had someone take a pic of the two 8/10's side by side and send it to my email. I will try to upload from here, but i dont know if i can just yet. If so i hope they arent to blurry so you guys can see what im talking about. |
|
|
|
|
07-04-2010, 04:42 AM
|
#3782 |
|
Drives: 10 Procharged SS Join Date: Oct 2009
Location: The creek at the end of the dead end road
Posts: 1,857
|
Launch Photo's with a twist
Sorry if these pics dont turn out. Its a pic of pics.
Hopefully you can see what im talking about. I know its not much twist, but again this is without an SC and around 400/400 rwhp and tq. After the 650 package with some extra goodies i should be around 610/600 rwhp and tq along with DR's. Imagine the twist then Last edited by se7en; 06-06-2011 at 12:13 PM. |
|
|
|
|
07-04-2010, 07:45 AM
|
#3783 |
|
Drives: 10 Procharged SS Join Date: Oct 2009
Location: The creek at the end of the dead end road
Posts: 1,857
|
BTW: the stripes and rims in this picture are no more!
 I hated the stripes and i bought forged wheels. These will be used only for the drag. 
|
|
|
|
|
07-04-2010, 08:03 AM
|
#3784 |
|
I see what your saying that's why I have to have the extra support!!
HAPPY 4th OF JULY everyone!!!!!
__________________
2012 ZL1 #1278
2010 2nd Place Fastest 4 5th Gen LSX Shootout 2011 2nd Place Fastest 4 5th Gen LSX Shootout |
|
|
|
|
07-04-2010, 10:36 AM
|
#3785 |
|
Drives: 10 Procharged SS Join Date: Oct 2009
Location: The creek at the end of the dead end road
Posts: 1,857
|
Happy 4th guys!!
Enjoy eating some good food and drinking some good beer!!! |
|
|
|
|
07-04-2010, 10:37 AM
|
#3786 |
|
Drives: 10 Procharged SS Join Date: Oct 2009
Location: The creek at the end of the dead end road
Posts: 1,857
|
Hey Paul where do you live at in Indiana? I live close to Evansville. Im about 3hrs from Indy- 2 1/2 in the Maro!!
|
|
|
|
|
07-04-2010, 01:07 PM
|
#3787 | |
|
|
Quote:
I am about 20 miles south of Fort Wayne and 20 miles west of Decatur. Maybe about 2 hours north of Indy.
__________________
2012 ZL1 #1278
2010 2nd Place Fastest 4 5th Gen LSX Shootout 2011 2nd Place Fastest 4 5th Gen LSX Shootout |
|
|
|
|
|
07-04-2010, 01:56 PM
|
#3788 |
|
Drives: 10 Procharged SS Join Date: Oct 2009
Location: The creek at the end of the dead end road
Posts: 1,857
|
Well your not to far away. I plan on making a trip to LPE in Sept/Oct and i'd like to check out that bad boy Camaro you got. Margarita's and Senorita's on me brother!! lol
|
|
|
|
|
07-04-2010, 04:05 PM
|
#3789 |
  
Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009
Location: El Paso
Posts: 2,973
|
Hey everyone Have a Great Independance Day!!!!!!!
__________________
Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive,
MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood! |
|
|
|
|
07-05-2010, 11:15 AM
|
#3790 |
Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008
Location: Sioux Falls, SD
Posts: 1,640
|
Hope everyone had a good 4th!!
__________________
'10 CTS-V : LPE 650+ Package 587hp / 582tq
2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI |
|
|
|
|
07-05-2010, 08:13 PM
|
#3791 | |
  Drives: 2010 Join Date: Jul 2009
Location: NH
Posts: 4,788
|
Quote:
My favorite bartender just gave his notice.... I'm bumming...  Good 4th though.. Many thanks to all the armed services folks out there that keep us safe! |
|
|
|
|
|
07-05-2010, 08:26 PM
|
#3792 |
Drives: 2010 2SS/RS IOM Join Date: Sep 2009
Location: New Mexico
Posts: 1,210
|
We just got back from a nice long weekend in the Jemez mountains. Boy I guess we sure missed a lot. Sorry to hear about you rearend Speed, but glad you've got it covered!
 Paul, we are so ready to see this awesome build finished!  BWS, thanks for all you do for us, and I hope your build comes along nicely for your homecoming. In my case, I had to wait on wheels and tires, but it's not so bad, you can just practice your "drifting" till they come!!  570, sorry to hear about your bartender. Thanks for all your knowledgeable advice you have to offer all of us. MWS, glad you had a good 4th, and lookin' forward to meeting you and your family this weekend. I know it will be worth the trip. 
__________________
LPE 650 BHP package
Dual disc clutch set Borla catback exhaust-S type DSS 9" rear with 3.90 gear Pfadt suspension/Hotchkiss chassis brace Forgeline Wheels VR3S/Nitto tires  Beware of the LPE Sisterhood |
|
|
|
|
07-05-2010, 09:37 PM
|
#3793 |
|
Drives: 2010 Join Date: Jul 2009
Location: NH
Posts: 4,788
|
Here are a couple of pic's of my autocross wheels mounted on the car.
The Wheels are the 18" CCW C2K's. These are definitely not for street driving... The 1st pic is of the rear wheel (the rear tire is just shy of a 13" wide footprint...) it's hard to capture the width in a picture... These wheels took a LOT of work to make them fit - the only use for these wheels is extreme cornering in a FLAT parking lot.... These pictures were taken before I swapped the lower control arms for the Spohn components. I align the car on July 10.. I am getting ready for my next SCCA event on July 18th. Hopefully this is the last major setup the car needs. I pray I will be done - I'm ready to start Kicking ASS at the next event and going forward... Keeping my fingers crossed that everything works out as planned.
|
|
|
|
|
07-05-2010, 09:45 PM
|
#3794 | |
Drives: 5th Gen Rental Join Date: Aug 2007
Location: New England
Posts: 1,901
|
Quote:
thanks mike dms |
|
|
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Lingenfelter 2010 Camaro Engine Packages Including New Vehicle Now Available | Tim@Lingenfelter | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 6 | 06-18-2010 08:11 AM |
| Lingenfelter 2010 Camaro Engine Packages - up to 800hp! | Sizzox | 5th Gen Camaro SS LS LT General Discussions | 108 | 04-14-2010 08:09 PM |
| My Lingenfelter Camaro Build | Speed74SS | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 244 | 10-08-2009 11:00 PM |
| Lingenfelter Supercharged Camaro makes 600 RWHP!! | Kevin@Lingenfelter | Forced Induction - V8 | 218 | 06-24-2009 03:26 PM |
| Three 2010 Camaros Arrive at Lingenfelter Performance Engineering | Sizzox | 5th Gen Camaro SS LS LT General Discussions | 25 | 04-26-2009 02:15 PM |
