2014 Heat extractor on a 2010 hood - Page 28 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

USCAMARO14 · 01-03-2015, 06:41 AM

I will be doing this to my car. But I might pay a shop for it. Don't want to mess it up. Just for them to do the cut on the hood. I can do the rest.

Eddiefuzz · 01-03-2015, 08:41 PM

Quote:

Originally Posted by USCAMARO14

I will be doing this to my car. But I might pay a shop for it. Don't want to mess it up. Just for them to do the cut on the hood. I can do the rest.

Cutting the hood is the easiest part. It cuts like paper. The layout and finish work is what takes the most time. Feel free to ask questions, many members are willing to help. We each have a little different way of doing it.

USCAMARO14 · 01-03-2015, 09:05 PM

Thanks! I will let you all know.

Lexodar · 01-05-2015, 07:53 PM

Can someone post a link on where to get the hood vent? Putting on my 2012.

2SSRS@Gen5diy · 01-05-2015, 07:58 PM

Hi guys love the work, going to test out if there may be a better way to add this to the hood, will let you guys know soon.

JantzenOKC · 01-05-2015, 11:01 PM

Quote:

Originally Posted by 2SSRS@Gen5diy

Hi guys love the work, going to test out if there may be a better way to add this to the hood, will let you guys know soon.

crc91 · 01-06-2015, 01:11 AM

Quote:

Originally Posted by 2SSRS@Gen5diy

Hi guys love the work, going to test out if there may be a better way to add this to the hood, will let you guys know soon.

I haven't installed yet. Would love to see if there is a easier way.

USCAMARO14 · 01-06-2015, 04:55 AM

Thanks keep us posted.

Jerry7297 · 01-06-2015, 11:22 AM

Quote:

Originally Posted by 2SSRS@Gen5diy

Hi guys love the work, going to test out if there may be a better way to add this to the hood, will let you guys know soon.

We will all be waiting.

crc91 · 01-06-2015, 11:31 PM

have my APR splitter and vent sitting in my room... wish i didnt work so much! I'm dying to get these installed.

YunKazuya · 01-12-2015, 08:19 PM

I'll be on stand by for an easiest way to secure this.

justjoshin · 01-12-2015, 08:58 PM

I was thinking about doing this but ended up ordering a z force instead. If i would have i was planning on making a flanged insert out of angle iron to sandwich the hood between it and the vent.

SSMY1LE · 01-12-2015, 09:12 PM

Quote:

Originally Posted by Eddiefuzz

Read the Thread! Mine is easily removable with 4 wing nuts. YES, I can waves of heat coming through when I'm at a light. If the temps are below 60, I can drive for hours and when I check, the intake manifold is still cool.

Is there some reason why you placed it so far back towards the windshield ??

Eddiefuzz · 01-13-2015, 06:57 PM

Quote:

Originally Posted by SSMY1LE

Is there some reason why you placed it so far back towards the windshield ??

I'm NUTTY!!!

It's only a few inches.

01-03-2015, 06:41 AM	#379
USCAMARO14 Drives: 2LS 2014 Join Date: Oct 2013 Location: Staten ISland Posts: 3,404	I will be doing this to my car. But I might pay a shop for it. Don't want to mess it up. Just for them to do the cut on the hood. I can do the rest. __________________

01-03-2015, 09:05 PM	#381
USCAMARO14 Drives: 2LS 2014 Join Date: Oct 2013 Location: Staten ISland Posts: 3,404	Thanks! I will let you all know. __________________

01-06-2015, 04:55 AM	#386
USCAMARO14 Drives: 2LS 2014 Join Date: Oct 2013 Location: Staten ISland Posts: 3,404	Thanks keep us posted. __________________

01-06-2015, 11:31 PM	#388
crc91 Drives: '14 1LS Join Date: Apr 2014 Location: Mandeville Posts: 2,166	have my APR splitter and vent sitting in my room... wish i didnt work so much! I'm dying to get these installed. __________________ Patiently waiting for my 2023 SS 1LE

01-12-2015, 08:58 PM	#390
justjoshin Drives: 2010 SW 1SS L99 Camaro Join Date: Aug 2011 Location: Louisiana Posts: 2,085 View My Garage	I was thinking about doing this but ended up ordering a z force instead. If i would have i was planning on making a flanged insert out of angle iron to sandwich the hood between it and the vent. __________________

01-05-2015, 07:53 PM	#382
Lexodar Drives: Summit White LFX Join Date: Dec 2013 Location: Palm Beach, FL Posts: 357	Can someone post a link on where to get the hood vent? Putting on my 2012.

01-05-2015, 07:58 PM	#383
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	Hi guys love the work, going to test out if there may be a better way to add this to the hood, will let you guys know soon.

01-12-2015, 08:19 PM	#389
YunKazuya Drives: 2013 Camaro Hot Wheels convertible Join Date: Jun 2013 Location: Fort Dix, NJ Posts: 4 View My Garage	I'll be on stand by for an easiest way to secure this.