07-19-2018, 02:07 PM | #29 |
Big Crow
Drives: '13 ZL1 Join Date: Mar 2017
Location: California
Posts: 1,532
|
I keep looking at the very limited area to bring in outside air with a CAI. I'm going to do a washer bottle kit relocation to free up another small outside air intake port where it used to be blocked.
The current port looks smaller than a 12oz beverage can sideways. How is 700hp supposed to breath through that? Thinking how my 1/2 hp shop vac pulls a vacuum on a hose. Maybe I'm all wrong but that's how it looks to me. |
07-19-2018, 04:16 PM | #30 | |
Account Suspended
Drives: 2013 zl1 Join Date: Aug 2017
Location: Dearborn
Posts: 253
|
Quote:
Sent from my HTC 10 using Tapatalk |
|
07-19-2018, 04:54 PM | #31 |
fo'shizZL1
Drives: 2017 ZL1 Join Date: Aug 2017
Location: ATL
Posts: 1,377
|
Or you could drill down into Camaro parts and find everything that you wanted to know right here. Took me all of 10 seconds, and I don't frequent their website:
.... Camaro / Camaro ZL1 / Engines/Engine Parts / Camshafts/Valvetrain / JDP Motorsports - 2009-15 CTS-V/Camaro ZL1/Corvette ZR1 6.2L
__________________
2017 ZL1 M6 Black | Maggie 2650 // 103TB // Big Gulp // CSP LT's & Ultra Cats // JMS // Elite Ultra CC // BMR MM // BC Forged KL13
Past Rides- 2014 ZL1 M6 Red Hot | Tons of mods 2004 CTS-V M6 Silver | Many mods 1995 Corvette M6 Torch Red | A few more mods 1992 Camaro M5 White | A few mods |
07-19-2018, 05:15 PM | #32 | |
Account Suspended
Drives: 2013 zl1 Join Date: Aug 2017
Location: Dearborn
Posts: 253
|
Quote:
Sent from my HTC 10 using Tapatalk |
|
07-20-2018, 05:39 AM | #33 |
Happy_Dan
|
So, why are you tearing apart his advertising and web page? You have your build, be happy with it. We don't need to hear you bashing a vendor here. It's just not right
|
07-20-2018, 06:25 AM | #34 | |
Account Suspended
Drives: 2013 zl1 Join Date: Aug 2017
Location: Dearborn
Posts: 253
|
Quote:
Sent from my HTC 10 using Tapatalk |
|
07-20-2018, 08:20 AM | #35 |
Happy_Dan
|
This sounds like bashing to me! It is certainly not a question or positive message. Maybe it's the internet and the tone does not carry. I'll leave this alone now, but I felt it necessary to make a comment. I know how hard it is to build a good reputation and it doesn't take much to ruin one.
"So let's pay 11k+ to drop a valve and pull timing bc there iats are so hot bc their brick is collapsed after running 15+ psi bc you didn't wanna include a $75 service...."
__________________
|
|
|
Tags |
dyno, jdp motorsports, zl-850 package, zl1 build |
|
|