427 stroker build - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BluGoose2 · 12-05-2010, 03:10 PM

Looks awesome, I bet it's going to run like a guy with hot grits on him.

silverfox · 12-08-2010, 04:57 PM

Quote:

Originally Posted by ls2 goat

Very nice setup man. What kinda fuel will you be running? Going with some high or low impedance injectors?

High imp and 100 lb

silverfox · 12-08-2010, 05:09 PM

Trans is back from rossler and motor is on engine dyno. It will be tested monday as the guys at Va. speed are going to the PRI show in FLA.
NW 102 TB is in and the marcella intake is coming soon. Pro torque converter is about a week away. New fuel pump will be a aeromotive 11104 eliminator which goes up to 1400hp and its in.

silverfox · 12-08-2010, 05:19 PM

Pics of it sitting on engine dyno waiting to be beat on.
That intake is from my old engine, just using for some testing.

ls2 goat · 12-10-2010, 07:50 PM

Quote:

Originally Posted by silverfox

High imp and 100 lb

Very Nice. I run the same ones but may be moving up based on the injector duty cycle I'm at now. Make sure you don't use any oxygenated fuel with those injectors or you'll run a huge risk of popping the motor.

Jeremy

silverfox · 12-11-2010, 08:00 AM

Quote:

Originally Posted by ls2 goat

Very Nice. I run the same ones but may be moving up based on the injector duty cycle I'm at now. Make sure you don't use any oxygenated fuel with those injectors or you'll run a huge risk of popping the motor.

Jeremy

Jeremy, can you explain why. I have heard some talk about the injector o rings not liking q16 that some builders run on the engine dyno.
Ken

ls2 goat · 12-12-2010, 03:13 PM

Quote:

Originally Posted by silverfox

Jeremy, can you explain why. I have heard some talk about the injector o rings not liking q16 that some builders run on the engine dyno.
Ken

From what I was told by John at FIC, the injectors swell and screw everything up. He said they lost a 40k engine messing around with the q16. I run c16 in mine now. Now way I'm losing my motor again. We'll have to get together when you get your car up and running. I'm up here at Quantico and not too far away.

Here's some info on my build if you care to look. Not trying to take your thread off track in any way. A few changes have been made since and I'm at 850ish to the wheels on 12 pounds of boost and pump gas.

http://www.ls1gto.com/forums/showthread.php?t=386739

Jeremy

silverfox · 12-18-2010, 01:24 PM

Here is a dyno sheet of an initial run. Only went to 5200rpm as the 60lb injectors ran out. 100lb injectors going in next along with different pulleys as we were only running 7 lbs of boost!

thesnoopster · 12-19-2010, 09:58 AM

Quote:

Originally Posted by silverfox

Here is a dyno sheet of an initial run. Only went to 5200rpm as the 60lb injectors ran out. 100lb injectors going in next along with different pulleys as we were only running 7 lbs of boost!

Damn! Now thats power! Looking good so far... cant wait to see the final results.... thats gonna be a monster!

SSRS2010 · 12-19-2010, 10:09 AM

Camaro68 · 12-21-2010, 02:32 AM

Awesome, thanks for shairing.
keep those pic's comming

silverfox · 12-24-2010, 07:01 AM

Up to 1130hp, 985ft lbs. 15lbs of boost at 6400rpm

silverfox · 12-24-2010, 07:06 AM

This is with the stock ls3 intake and tb. Still waiting on the sheet metal intake and 102mm nw tb.Builder says it should go to about 1250hp as a final number.
Ken

fastfaster · 12-24-2010, 08:23 AM

beautiful build, good luck to you.

12-08-2010, 05:09 PM	#31
silverfox Drives: 2010 camaro ss Join Date: Jun 2009 Location: portsmouth,va. Posts: 502 View My Garage	Trans is back from rossler and motor is on engine dyno. It will be tested monday as the guys at Va. speed are going to the PRI show in FLA. NW 102 TB is in and the marcella intake is coming soon. Pro torque converter is about a week away. New fuel pump will be a aeromotive 11104 eliminator which goes up to 1400hp and its in. __________________ [SIGPIC][/SIGPIC]Va.Speed built 427 stroker LS2 Darton sleeved 427 stroker.Callies dragonslayer crankshaft. Callies I beam rods. Wiseco blower pistons. Mast cnc 12 degree big bore ls3 heads-2.2 intake &1.6 ex. 6 bolt 270cc-.750 deck. Lunati link bar lifters.T&D roller rockers.COMP-VA. Speed special cam 605 lift, 238dur. Procharger F1R @15psi. ARH headers with custom 3'' exhaust all the way.Magnaflow mufflers. QTP cutouts.Rossler built 6l80e trans. DSS 1400hp axles. Pfadt suspension.-Coilovers, sway bars,motor mounts,trailing arms. Aeromotive eliminater pump. 907rwhp.

12-08-2010, 05:19 PM	#32
silverfox Drives: 2010 camaro ss Join Date: Jun 2009 Location: portsmouth,va. Posts: 502 View My Garage	Pics of it sitting on engine dyno waiting to be beat on. That intake is from my old engine, just using for some testing. Attached Images __________________ [SIGPIC][/SIGPIC]Va.Speed built 427 stroker LS2 Darton sleeved 427 stroker.Callies dragonslayer crankshaft. Callies I beam rods. Wiseco blower pistons. Mast cnc 12 degree big bore ls3 heads-2.2 intake &1.6 ex. 6 bolt 270cc-.750 deck. Lunati link bar lifters.T&D roller rockers.COMP-VA. Speed special cam 605 lift, 238dur. Procharger F1R @15psi. ARH headers with custom 3'' exhaust all the way.Magnaflow mufflers. QTP cutouts.Rossler built 6l80e trans. DSS 1400hp axles. Pfadt suspension.-Coilovers, sway bars,motor mounts,trailing arms. Aeromotive eliminater pump. 907rwhp.

12-18-2010, 01:24 PM	#36
silverfox Drives: 2010 camaro ss Join Date: Jun 2009 Location: portsmouth,va. Posts: 502 View My Garage	Here is a dyno sheet of an initial run. Only went to 5200rpm as the 60lb injectors ran out. 100lb injectors going in next along with different pulleys as we were only running 7 lbs of boost! Attached Images __________________ [SIGPIC][/SIGPIC]Va.Speed built 427 stroker LS2 Darton sleeved 427 stroker.Callies dragonslayer crankshaft. Callies I beam rods. Wiseco blower pistons. Mast cnc 12 degree big bore ls3 heads-2.2 intake &1.6 ex. 6 bolt 270cc-.750 deck. Lunati link bar lifters.T&D roller rockers.COMP-VA. Speed special cam 605 lift, 238dur. Procharger F1R @15psi. ARH headers with custom 3'' exhaust all the way.Magnaflow mufflers. QTP cutouts.Rossler built 6l80e trans. DSS 1400hp axles. Pfadt suspension.-Coilovers, sway bars,motor mounts,trailing arms. Aeromotive eliminater pump. 907rwhp.

12-21-2010, 02:32 AM	#39
Camaro68 Drives: 68 Camaro 327ci 2SS/RS 376ci LS3 Join Date: Mar 2008 Location: Prince William, VA Posts: 2,703 View My Garage	Awesome, thanks for shairing. keep those pic's comming __________________ 6000 Vehicle Delivered to Customer 6-23-10

12-24-2010, 07:01 AM	#40
silverfox Drives: 2010 camaro ss Join Date: Jun 2009 Location: portsmouth,va. Posts: 502 View My Garage	Up to 1130hp, 985ft lbs. 15lbs of boost at 6400rpm Attached Images __________________ [SIGPIC][/SIGPIC]Va.Speed built 427 stroker LS2 Darton sleeved 427 stroker.Callies dragonslayer crankshaft. Callies I beam rods. Wiseco blower pistons. Mast cnc 12 degree big bore ls3 heads-2.2 intake &1.6 ex. 6 bolt 270cc-.750 deck. Lunati link bar lifters.T&D roller rockers.COMP-VA. Speed special cam 605 lift, 238dur. Procharger F1R @15psi. ARH headers with custom 3'' exhaust all the way.Magnaflow mufflers. QTP cutouts.Rossler built 6l80e trans. DSS 1400hp axles. Pfadt suspension.-Coilovers, sway bars,motor mounts,trailing arms. Aeromotive eliminater pump. 907rwhp.

12-05-2010, 03:10 PM	#29
BluGoose2 Drives: Aqua Blue 2SS/RS, Silver Rally Join Date: Sep 2009 Location: Northern Va. Posts: 198	Looks awesome, I bet it's going to run like a guy with hot grits on him.

12-19-2010, 10:09 AM	#38
SSRS2010 SS/RSVIN04274 Drives: 2010 CAMARO. Join Date: Apr 2009 Location: Las Cruces NM Posts: 1,348

12-24-2010, 07:06 AM	#41
silverfox Drives: 2010 camaro ss Join Date: Jun 2009 Location: portsmouth,va. Posts: 502 View My Garage	This is with the stock ls3 intake and tb. Still waiting on the sheet metal intake and 102mm nw tb.Builder says it should go to about 1250hp as a final number. Ken __________________ [SIGPIC][/SIGPIC]Va.Speed built 427 stroker LS2 Darton sleeved 427 stroker.Callies dragonslayer crankshaft. Callies I beam rods. Wiseco blower pistons. Mast cnc 12 degree big bore ls3 heads-2.2 intake &1.6 ex. 6 bolt 270cc-.750 deck. Lunati link bar lifters.T&D roller rockers.COMP-VA. Speed special cam 605 lift, 238dur. Procharger F1R @15psi. ARH headers with custom 3'' exhaust all the way.Magnaflow mufflers. QTP cutouts.Rossler built 6l80e trans. DSS 1400hp axles. Pfadt suspension.-Coilovers, sway bars,motor mounts,trailing arms. Aeromotive eliminater pump. 907rwhp.

12-24-2010, 08:23 AM	#42
fastfaster Account Suspended Drives: xxxxxxxxxxxxxx Join Date: Jun 2010 Location: xxxxxxxxxxxxxxxxxxxx Posts: 479	beautiful build, good luck to you.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
427	KILLER74Z28	General Automotive + Other Cars Discussion	5	06-18-2010 12:55 AM
Before you build it GM, Dont make the same mistake twice...	302 Wild Mouse	5th Gen Camaro SS LS LT General Discussions	86	05-19-2010 04:48 PM
Pat's APF stage1 turbo build	Will@Apf	Forced Induction - V8	40	05-15-2010 06:14 PM
Build Date and Build Sheet	markbolt	5th Gen Camaro SS LS LT General Discussions	5	04-04-2010 10:21 PM
Detroit News panel wants GM to build Camaro concept	Tran	5th Gen Camaro SS LS LT General Discussions	12	03-15-2009 05:38 PM