VIS Terminator Hood liner - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Rhyder · 08-21-2013, 05:20 PM

update bump

Pharmaro · 08-21-2013, 06:53 PM

The template was just a bit off, next one should be golden, meet with him next Tuesday to fit it.

He will be leaving it up to me to adhere to the hood liner as he doesn't feel comfortable recommending one due to liability reasons. If it was able to be mechanically fastened, that'd be a different story. I think I'm going to try Loctite Powergrab 8x and we'll see how that goes.

Rhyder · 08-21-2013, 06:56 PM

contact loctite and see what they recommend if anything.

Pharmaro · 08-27-2013, 04:17 PM

Update Bump

Final template fitted, he's manufacturing the piece but will have to order some carbon fiber in for my specific design. Should have pics for you next week!

Pharmaro · 09-19-2013, 09:44 PM

Well here's another update, finally got around to picking up the final piece from Roger and test fit it on my hood. I only had to do some very minor trimming (bottom right corner)of the hood to get it to fit snugly in the seams. I'll post another pic once the adhesive cures and I reinstall the hood. Don't mind the fingerprints.

Name: Carbon Underhood 1.JPG
Views: 317
Size: 116.1 KB

Name: Carbon Underhood 1.JPG
Views: 317
Size: 116.1 KB

Name: Carbon Underhood 2.JPG
Views: 243
Size: 107.9 KB

Pharmaro · 09-23-2013, 09:49 PM

Here's another higher quality installed picture. I've been running around with it installed for a couple of days and no issues with the adhesive yet.

Name: Underhood.jpg
Views: 183
Size: 106.2 KB

Name: Underhood.jpg
Views: 183
Size: 106.2 KB

Rhyder · 01-14-2014, 04:51 PM

been off the site for awhile....looks good, he planning on making more of these do you know?

Pharmaro · 01-14-2014, 09:54 PM

Quote:

Originally Posted by Rhyder

been off the site for awhile....looks good, he planning on making more of these do you know?

He has the template file saved. He'll make them upon request I'm sure. Pretty much customizable however you'd like.

Still no problems with how it's attached.

ACS Composite · 01-14-2014, 09:57 PM

We manufacturer a Hood-liner

to fit most hoods. I would assume it would fir yours

Easy to install and paint with any design

Quote:

Originally Posted by Rhyder

I got one of the VIS Terminator hoods and was wondering if there are any hood liners out there for them, something that doesn't cover the vents but dresses the hood up a little.

I searched here and Google'ed and all that pops up are the hoods themselves...figured I take a shot in the dark to see if anyone here knew anything...

dragonZ28 · 01-16-2014, 01:27 PM

Quote:

Originally Posted by Rhyder

been off the site for awhile....looks good, he planning on making more of these do you know?

I can make more of them.

Just let me know.
Thanks, Roger

08-21-2013, 05:20 PM	#29
Rhyder Drives: 2012 45 Anniversary Vert Join Date: Apr 2012 Location: atlanta Posts: 2,511	update bump

08-21-2013, 06:53 PM	#30
Pharmaro Drives: 2011 CGM 2SS/RS Join Date: Apr 2011 Location: Louisville Posts: 368	The template was just a bit off, next one should be golden, meet with him next Tuesday to fit it. He will be leaving it up to me to adhere to the hood liner as he doesn't feel comfortable recommending one due to liability reasons. If it was able to be mechanically fastened, that'd be a different story. I think I'm going to try Loctite Powergrab 8x and we'll see how that goes.

08-21-2013, 06:56 PM	#31
Rhyder Drives: 2012 45 Anniversary Vert Join Date: Apr 2012 Location: atlanta Posts: 2,511	contact loctite and see what they recommend if anything.

08-27-2013, 04:17 PM	#32
Pharmaro Drives: 2011 CGM 2SS/RS Join Date: Apr 2011 Location: Louisville Posts: 368	Update Bump Final template fitted, he's manufacturing the piece but will have to order some carbon fiber in for my specific design. Should have pics for you next week!

09-19-2013, 09:44 PM	#33
Pharmaro Drives: 2011 CGM 2SS/RS Join Date: Apr 2011 Location: Louisville Posts: 368	Well here's another update, finally got around to picking up the final piece from Roger and test fit it on my hood. I only had to do some very minor trimming (bottom right corner)of the hood to get it to fit snugly in the seams. I'll post another pic once the adhesive cures and I reinstall the hood. Don't mind the fingerprints.

09-23-2013, 09:49 PM	#34
Pharmaro Drives: 2011 CGM 2SS/RS Join Date: Apr 2011 Location: Louisville Posts: 368	Here's another higher quality installed picture. I've been running around with it installed for a couple of days and no issues with the adhesive yet.

01-14-2014, 04:51 PM	#35
Rhyder Drives: 2012 45 Anniversary Vert Join Date: Apr 2012 Location: atlanta Posts: 2,511	been off the site for awhile....looks good, he planning on making more of these do you know?