Interior designs

[Asian Zero]

Originally Posted by REDLFX

I have the real red carbon fiber in my car and it looks great. Its really easy to install too, it took me an hour and thats because I took my time. I ordered it from Carid.com and its $135 for regular colors and simulated carbon fiber and about $175 for the real carbon fiber. My car is a DD so I don't have the time to strip everything out to have it painted and with the paint I'm always worried about scuffing and peeling.

If anything id be worried about that stuff losing adhesion. Especially with extreme temps.

[StephenS_84]

Originally Posted by The Stig

There is a DIY in the DIY subforum. Check the big DIY sticky for a link to it.

Originally Posted by iCamaro

First pull the long strip on the dash off. Then remove the six 7mm bolts underneath it. Next lift the Shifter surround. This is the piece with the tray/gauges. this is easy to do if you have trim tools. if you don't use a flat head but be careful not to slip and damage part. Next, Remove the 2 bolts for the radio. Remove radio face. Next remove the upper two 7mm bolts behind radio. Then just pop off the leather trim section and then unbolt AC vent from that. And finally unclip the trim from vents.

Thanks fellas.