RiderGraphix Gill Stripe Pics?

[ZombieEatsYou]

Originally Posted by drider98

This has been covered in a previous post:

Here is the actual 3D CAD model with no Graphics applied. The original ones were designed to fit inside the flat portion of the Vent recess.

I remember that thread now; there are slight flare-out angles on the gills. It's not as noticeable without the accents attached.

[tjd24]

Originally Posted by RetroDude

I would be interested to see what these ( from Defenderworx ) would look like on an Imperial Blue Metallic SS?
Attachment 37932

I've been interested in these from defenderworx but they've indicated they're not going to produce them for now - too much backlog on other products. I want them in brushed aluminum to match my fuel door so I'll wait for them to produce or another vendor.

[camaros and vettes]

ridergraphix products suck!! got a set of bow tie decals, not even close to the right size for car. i asked what they would do, told me they are just fine. Wow what customer service. wont be buying anything from them again ever. hope you guys have better luck. over priced as well, auto trim will do same thing plus install cheaper than you can just buy from them.!!

[autoguy]

Originally Posted by camaros and vettes

ridergraphix products suck!! got a set of bow tie decals, not even close to the right size for car. i asked what they would do, told me they are just fine. Wow what customer service. wont be buying anything from them again ever. hope you guys have better luck. over priced as well, auto trim will do same thing plus install cheaper than you can just buy from them.!!

Here we go again. Another case of user error blamed on us. Like I told you in the email before you promised me that you were going to post everywhere "I'll see what I can do for your sales with a few posts", we have sold dozens of these and I have personally installed them myself. If they are installed properly, they fit perfect. I would imagine the only way they are as off as you claim is that you installed the front on the rear and the rear on the front. They are differnt sized in case you didn't notice.

It's really getting a bit old hearing from people like you that screw things up then try to blame the product. I will stand behind my product knowing it is cut properly. What I will NOT do, is just send out free product to anyone that uses the "I'm going to tell everyone on the forum not to buy because you did not give me something free" blackmail, and that is exactly what it is.

Now, we can hear from all the other people that have successfully installed the exact same thing, and those that screwed something up and expected us to send free replacements.

If someone else would sell AND install them for less, why didn't you go there in the first place? Apparently you were not very successful in doing the job yourself.


Look how terrible they fit.......

[Sgt. Fury]

Originally Posted by RetroDude

I would be interested to see what these ( from Defenderworx ) would look like on an Imperial Blue Metallic SS?
Attachment 37932

Where did you get these pics? I have been looking for something like them. I installed these this weekend and they are close. They did turn out good. The ones one Defenderworx site http://www.defenderworx.com/index.ph...d=29&Itemid=22
dont look like the ones you posted.

[SummoneR]

Originally Posted by autoguy

Here we go again. Another case of user error blamed on us. Like I told you in the email before you promised me that you were going to post everywhere "I'll see what I can do for your sales with a few posts", we have sold dozens of these and I have personally installed them myself. If they are installed properly, they fit perfect. I would imagine the only way they are as off as you claim is that you installed the front on the rear and the rear on the front. They are differnt sized in case you didn't notice.

It's really getting a bit old hearing from people like you that screw things up then try to blame the product. I will stand behind my product knowing it is cut properly. What I will NOT do, is just send out free product to anyone that uses the "I'm going to tell everyone on the forum not to buy because you did not give me something free" blackmail, and that is exactly what it is.

Now, we can hear from all the other people that have successfully installed the exact same thing, and those that screwed something up and expected us to send free replacements.

If someone else would sell AND install them for less, why didn't you go there in the first place? Apparently you were not very successful in doing the job yourself.


Look how terrible they fit.......

[FAF]

Originally Posted by RetroDude

I would be interested to see what these ( from Defenderworx ) would look like on an Imperial Blue Metallic SS?
Attachment 37932

how about in orange for IOM Do they make it like that

[camaros and vettes]

so look at the left side of the bottom picture is it me or is that the gold of the bow tie along the side?? but the are PERFECT. his picture and it is not cut right!!!!!!

[VenomZ302]

Originally Posted by camaros and vettes

so look at the left side of the bottom picture is it me or is that the gold of the bow tie along the side?? but the are PERFECT. his picture and it is not cut right!!!!!!

What are you talking about? I don't see anything that resembles gold, unless I'm looking at the wrong picture...

[camaros and vettes]

[Crowley]

I'll find out soon enough .. I ordered their bowtie blackouts ...

Crowley

[autoguy]

[VenomZ302]

Originally Posted by camaros and vettes

<image>

Yeah, I see what you're talking about, but see no gold.

[dragonZ28]

Originally Posted by Sgt. Fury

Where did you get these pics? I have been looking for something like them. I installed these this weekend and they are close. They did turn out good. The ones one Defenderworx site http://www.defenderworx.com/index.ph...d=29&Itemid=22
dont look like the ones you posted.

These pieces belong to emblempros.com as the watermark is on it.
www.emblempros.com
sales@emblempros.com

We are emblempros, and that's my very nice IOM car. Please let me know if anyone needs info on these Stainless steel pieces.