Glove box rattle..? - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jayno20 · 11-12-2014, 09:28 PM

Quote:

Originally Posted by Sven59

I took the rattle out of my glove compartment and put it in the center console. It isn't as loud there.

Via lightning from a large Hammer.

Magic?

i007spectre · 11-13-2014, 05:36 PM

Wonder if you can get a new glovebox and install yourself.

jayno20 · 11-13-2014, 11:03 PM

Quote:

Originally Posted by i007spectre

Wonder if you can get a new glovebox and install yourself.

I don't think that would fix it. From what I see a lot of people are having this issue so it sounds like a production issue not so much a problem here and there.

JamesZL1 · 11-14-2014, 01:51 PM

you might try wrapping a little electric tape around the latch to keep it from being metal on metal and thicken it up till it gets tight, or apply some sort of plastic coating around the latch and let it dry...I think if you get the metal on metal contact fixed, it should fix it, or at least deaden the sounds some.

jayno20 · 11-14-2014, 03:25 PM

Quote:

Originally Posted by JamesZL1

you might try wrapping a little electric tape around the latch to keep it from being metal on metal and thicken it up till it gets tight, or apply some sort of plastic coating around the latch and let it dry...I think if you get the metal on metal contact fixed, it should fix it, or at least deaden the sounds some.

There isn't any metal on metal on the latch that I can see... The latches on the sides are plastic.

11-13-2014, 05:36 PM	#30
i007spectre Drives: 2016 2SS, 2008 HHR ECTO-2H Join Date: Aug 2009 Location: Springfield, Mo Posts: 1,935 View My Garage	Wonder if you can get a new glovebox and install yourself. __________________ 2016 Camaro 2SS. Hyper Blue, Ceramic White, Auto, MRC, and NPP. 1100 - 9/25 2000 - 9/28 3000 - 9/30 3100 - 10/27 3300 - 10/28 3400 - 10/29 TPW 11/09 3800 - 11/10 4300 - 11/24 4B00 - 11/25 4200 - 12/5 5000 - 12/7 6000 - 12/11

11-14-2014, 01:51 PM	#32
JamesZL1 Drives: 2013 ZL1 A6 Camaro, 2015 C7 A6 Z51 Join Date: Apr 2014 Location: Oklahoma Posts: 396	you might try wrapping a little electric tape around the latch to keep it from being metal on metal and thicken it up till it gets tight, or apply some sort of plastic coating around the latch and let it dry...I think if you get the metal on metal contact fixed, it should fix it, or at least deaden the sounds some. __________________ Roto-Fab CAI, Texas Speed Headers, Texas Speed X-Pipe, Texas Speed LS3-B Blower Cam, Metco 9.10" Crank Pulley, Metco 2.5 Upper Pulley, ID 850 Injectors, LPE Ported Throttle Body, Alky Control Methanol kit, E2 Catch Can, 610HP / 608 Torque.