Grinding/Rubbing Noise - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

370zyzfr1 · 03-15-2016, 10:30 AM

Any updates to this? Having the same issues..,

Only when turning hard left. Sounds like something is rubbing or an mechical area is under strain. Seems like coming from front right passenger area.

mrWizard · 03-15-2016, 01:50 PM

Quote:

Originally Posted by 370zyzfr1

Any updates to this? Having the same issues..,

Only when turning hard left. Sounds like something is rubbing or an mechical area is under strain. Seems like coming from front right passenger area.

A while ago I took my wheel off and checked out most of my front suspension. Everything was tight and seemed to be in fine order. I haven't been taking turns aggressively since it started and it hasn't gotten worse.

I believe it may be something in the hub. Now that it is nicer out I'm gonna check it out, once I figure out my brakes/brake booster issue

I'll let you know if I find anything.

370zyzfr1 · 03-15-2016, 04:39 PM

My wheels never came off. But I did have the JRE 125 package installed and it happened right after the install. Almost sounds like something mechanical is straining when turning hard.

patrickt24 · 03-15-2016, 06:32 PM

I would like to second Jess post #24. Have your rear diff oil changed if that does not correct it the complete diff may have to be replaced. I had my diff done under warranty and all of my noises went away. The only noise I hear now is the supercharger and occasional police siren.

Whos_Drivin · 03-15-2016, 07:38 PM

Quote:

Originally Posted by 370zyzfr1

Any updates to this? Having the same issues..,

Only when turning hard left. Sounds like something is rubbing or an mechical area is under strain. Seems like coming from front right passenger area.

My passenger side header was rubbing against the frame rail when the engine torqued on left turns. A little well palced dimple fixed it for me. Pissed me off for quite a while though because I couldn't track it down...

Chevrolet Customer Svc · 03-16-2016, 07:08 PM

Quote:

[url=http://goo.gl/zLxRQ8 Posted by 370zyzfr1[/url] Any updates to this? Having the same issues..,

Only when turning hard left. Sounds like something is rubbing or an mechical area is under strain. Seems like coming from front right passenger area.

Hello 370zyzfr1,

Apologies for this grinding noise concern you're experiencing with your Camaro. I see that other forum members have offered some great suggestions, but don't hesitate to reach out to us if you would like to visit your dealership for a diagnostic appointment. We can certainly contact them on your behalf as well as provide support on our end. Please send us a private message containing your full contact information, current mileage, VIN, and preferred dealership if this is of interest to you.

Sincerely,

Julie C
Chevrolet Customer Care

Icemachine · 07-01-2016, 12:10 AM

Anyone have a picture of the dimple you had to make?

03-15-2016, 10:30 AM	#29
370zyzfr1 Drives: 2014 Camaro Zl1 Tripple Black! Join Date: Nov 2014 Location: Iowa Posts: 383	Any updates to this? Having the same issues.., Only when turning hard left. Sounds like something is rubbing or an mechical area is under strain. Seems like coming from front right passenger area.

03-15-2016, 04:39 PM	#31
370zyzfr1 Drives: 2014 Camaro Zl1 Tripple Black! Join Date: Nov 2014 Location: Iowa Posts: 383	My wheels never came off. But I did have the JRE 125 package installed and it happened right after the install. Almost sounds like something mechanical is straining when turning hard.

03-15-2016, 06:32 PM	#32
patrickt24 Drives: 2013 ZL1 CRT 6spd Join Date: Apr 2012 Location: Louisiana Posts: 107	I would like to second Jess post #24. Have your rear diff oil changed if that does not correct it the complete diff may have to be replaced. I had my diff done under warranty and all of my noises went away. The only noise I hear now is the supercharger and occasional police siren.

07-01-2016, 12:10 AM	#35
Icemachine Drives: 13 Zl1 grey vert Join Date: Oct 2012 Location: Sherwood Park Posts: 32	Anyone have a picture of the dimple you had to make?