Rapid Motorsports ZL1 Build- 784rwhp/757rwtq - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Trackman · 03-19-2015, 09:46 PM

Quote:

Originally Posted by Dutchman427

Just got back from picking the car up from Mikey's. Absolute beast to drive and finally has that raw power feeling like a built F-body had. Believe it or not, the tune is conservative and there is more in it. Mike did not want to push it though. Also, stock fuel pump and did not need a KB BAP either. I have one for sale if anybody needs one. Owhite3003 is going to try and upload my dyno sheet. Appreciate it bud!

Your saying your making 780 hp on the stock pump?

14ZL1M6 · 03-19-2015, 11:01 PM

Quote:

Originally Posted by Dutchman427

The ZL1 was dyno tuned today and put down 784rwhp and 757rwtq. On the first pull, it laid down 751rwhp. Car is running 15lbs of boost and is on the stock bottom end. (We will have to see how long it lasts!)

The ZL1 is down at Rapid Motorsports in Birdsboro, PA. Mike is a well known LS engine builder/tuner and his 99 Trans Am was the first LS1 to go into the 9s. He will be building and tuning the car. I will also be using Mike's custom grind blower camshaft. Mikey's cams always make good power and he is quite popular with the F-body crowd. Jeremy Formato of Fasterproms will be porting/milling the heads, blower, snout, and throttle body. My goal is to get as much power out of the stock components as possible. I will post up dyno results when it is done and looking forward to going to the track when it gets warm out.

Supporting Mods-
Metco 2.50 Pulley
10 % Lower Pulley
Kook 1 7/8s Headers with O/R pipes
Ron Davis Heat Exchanger
RotoFab CAI
ID850s
Brian Tooley Springs
Mighty Mouse Solutions Catch Can

I am sure I am forgetting something.---Update-I am not forgetting anything.

What are the specs on that "Magic Stick?" Lol I'm gathering parts currently for my build and I'm trying to figure out what cam I want.

Dutchman427 · 03-20-2015, 04:03 PM

Quote:

Originally Posted by Trackman

Your saying your making 780 hp on the stock pump?

Yes sir, that is what I am saying. I had a KB BAP because I thought for sure I would need it.

unstable vic · 03-20-2015, 04:06 PM

Awesome power!!!!!!!!!!!!!!!!!!!!!!!!

Dutchman427 · 03-20-2015, 04:08 PM

Quote:

Originally Posted by 14ZL1M6

What are the specs on that "Magic Stick?" Lol I'm gathering parts currently for my build and I'm trying to figure out what cam I want.

You will have to contact Mike. info@rapidmotorsports.com. He is pretty quiet about his specs. Also, I would look at having Jeremy Formato of Fasterproms port your heads, blower, snout, and throttle body. He hand ports the heads and are specifically designed for forced induction. If you cannot make it to Reading, PA because of distance (Pittsburgh is 5 hours from me) I know Jeremy will be in Gettysburg in April sometime.

Dutchman427 · 03-20-2015, 04:10 PM

Quote:

Originally Posted by unstable vic

Awesome power!!!!!!!!!!!!!!!!!!!!!!!!

Thanks Vic! Mikey remembers you by the way.

Dutchman427 · 03-20-2015, 04:22 PM

Thanks for helping me out owhite3003. Appreciate it man!

owhite3003 · 03-20-2015, 05:17 PM

Quote:

Originally Posted by Dutchman427

Thanks for helping me out owhite3003. Appreciate it man!

Any time buddy, make sure you let me know how your first major speed blast goes.

2013 ZL1 #7860 · 03-20-2015, 08:32 PM

Quote:

Originally Posted by Dutchman427

Yes sir, that is what I am saying. I had a KB BAP because I thought for sure I would need it.

I would love to hear how that is happening!

Everybody else says that is impossible...
If not then there should be no reason why ID1300's and a BAP couldn't support E85 and 600-625whp...

Nice numbers either way!

Dutchman427 · 03-20-2015, 09:38 PM

Quote:

Originally Posted by 2013 ZL1 #7860

I would love to hear how that is happening!

Everybody else says that is impossible...
If not then there should be no reason why ID1300's and a BAP couldn't support E85 and 600-625whp...

Nice numbers either way!

Thanks man. I am amazed just as much as probably you are.

ZL W0N · 03-21-2015, 01:43 AM

Can't wait to see this beast sometime soon!

Dutchman427 · 03-21-2015, 10:21 AM

Quote:

Originally Posted by ZL W0N

Can't wait to see this beast sometime soon!

Yeah man, once the snow is cleared, we will have to meet up. I got to get the car inspected and I want to throw on a set of Mickey Thompson ET Streets.

Redlineviper · 03-21-2015, 11:13 AM

Did you say yours is a manual or auto?

Dutchman427 · 03-21-2015, 11:16 AM

Manuel

03-21-2015, 01:43 AM	#39
ZL W0N GuitarmageddonZL1 Drives: ‘13 ZL1, ‘17 TT ZL1, ‘17 Silverado Join Date: Feb 2015 Location: Harrisburg, PA Posts: 432	Can't wait to see this beast sometime soon! __________________

03-20-2015, 04:06 PM	#32
unstable vic Account Suspended Drives: 2014 ZL1 Join Date: Jan 2015 Location: Long Island, NY Posts: 342	Awesome power!!!!!!!!!!!!!!!!!!!!!!!!

03-20-2015, 04:22 PM	#35
Dutchman427 Drives: 2012 ZL1 #1329 M6 Join Date: Jun 2009 Location: Reading, PA Posts: 1,040	Thanks for helping me out owhite3003. Appreciate it man!

03-21-2015, 11:13 AM	#41
Redlineviper Drives: 2013 ZL1 Join Date: Jan 2015 Location: Orlando Posts: 936	Did you say yours is a manual or auto?

03-21-2015, 11:16 AM	#42
Dutchman427 Drives: 2012 ZL1 #1329 M6 Join Date: Jun 2009 Location: Reading, PA Posts: 1,040	Manuel