Jannetty L99 Street Brawler Package 501 RWHP 512 RWTQ - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JANNETTYRACING · 03-02-2010, 05:26 PM

Quote:

Originally Posted by 94guy

does this car have stock exhaust after the dynatech cats?

This one has borla S-type exhaust.

Ted.

quinthawk · 03-09-2010, 09:10 PM

How much power would this package make without the upgraded pulley?

chappy48 · 03-09-2010, 11:50 PM

I'd guess around 490ish

HondaPowered · 03-10-2010, 12:41 AM

Just as an inquiry, how much does this go for installed? I plan on getting something like this when I can afford the car, and the upgrade.

JANNETTYRACING · 03-10-2010, 08:35 AM

Quote:

Originally Posted by quinthawk

How much power would this package make without the upgraded pulley?

Without the upgraded pulley, Headers, and my custom tuning they make around 440 RWHP

JANNETTYRACING · 03-10-2010, 08:38 AM

Quote:

Originally Posted by HondaPowered

Just as an inquiry, how much does this go for installed? I plan on getting something like this when I can afford the car, and the upgrade.

The complete package Professionally installed, includes, Supercharger system, Pulley Upgrade, Long tube headers, High flow cats, ADM Street CAI, hand held tuner and Dyno Tune is listed here http://jreperformanceparts.com/jre-5...10-camaro.html

HondaPowered · 03-10-2010, 12:18 PM

Quote:

Originally Posted by JANNETTYRACING

The complete package Professionally installed, includes, Supercharger system, Pulley Upgrade, Long tube headers, High flow cats, ADM Street CAI, hand held tuner and Dyno Tune is listed here http://jreperformanceparts.com/jre-5...10-camaro.html

thanks! keep up the awesome work guys.

quinthawk · 03-10-2010, 02:08 PM

What would the power be with 1 7/8 dynatech headers, custom tune and the standard magnuson kit with the 3.8" pulley?

JANNETTYRACING · 03-10-2010, 03:58 PM

Quote:

Originally Posted by quinthawk

What would the power be with 1 7/8 dynatech headers, custom tune and the standard magnuson kit with the 3.8" pulley?

Stock Air box, standard kit and Headers I would venture to guess 450 RWHP.

Ted.

quinthawk · 03-11-2010, 06:45 PM

Quote:

Originally Posted by JANNETTYRACING

Stock Air box, standard kit and Headers I would venture to guess 450 RWHP.

Ted.

Would 475 rwhp be possible with an airraid intake?

JANNETTYRACING · 03-11-2010, 11:30 PM

Quote:

Originally Posted by quinthawk

Would 475 rwhp be possible with an airraid intake?

I believe it would do that.

Ted.

JANNETTYRACING · 04-21-2010, 10:05 AM

BUMP FOR THE NEW GUYS.

jsharp · 04-22-2010, 12:30 AM

What should this setup put down
TVS2300
Pulley Upgrade
BAP
roto fab
Kooks Headers 1 7/8
Kooks catted connection pipes
No weeds diverters
Ported TB
and custom tuning?

JANNETTYRACING · 04-22-2010, 08:14 AM

Quote:

Originally Posted by jsharp

What should this setup put down
TVS2300
Pulley Upgrade
BAP
roto fab
Kooks Headers 1 7/8
Kooks catted connection pipes
No weeds diverters
Ported TB
and custom tuning?

This is essentially the same package but different brands, and the addition of the cutouts and TB.

The TB might add a slight improvement on the Maggie but I have not tested one yet.

Ted.

03-09-2010, 11:50 PM	#31
chappy48 Drives: 2010 Camaro Auto 2SS/RS Join Date: Oct 2008 Location: Wauconda, IL Posts: 878	I'd guess around 490ish __________________ Built by Jannetty Racing 670rwhp/649rwtq...Scariness to be determined. Jannety Racing forged 416. TVS2300 Supercharger w/Maggie Max Stage 2, 3.6 Pulley, Innovators West 8 rib conversion, OD rear Cog belt drive. Jannetty Racing Rough Idle Cam, LS3 Conversion. Jannetty Racing built 6l80e Trans, Jannetty Racing Custom Converter, Built rear diff w/ 3.45 gears, DSS driveshaft and 1400 hp axles. ADM Twin Pump Fuel System, ADM CAI, Dynatech 1 7/8" Coated Headers, Borla "S" Catback. Custom 18" Forgestar F14's, Nitto 305/45-18 DR's

03-10-2010, 12:41 AM	#32
HondaPowered Drives: '09 Honda Civic LX Join Date: Jun 2009 Location: Knoxville Posts: 562	Just as an inquiry, how much does this go for installed? I plan on getting something like this when I can afford the car, and the upgrade. __________________ Saving up for a camaro. Dream camaro is either a 1/2SS with RS, black with red stripes, or red with white stripes. No rice with my order.

04-21-2010, 10:05 AM	#40
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,427	BUMP FOR THE NEW GUYS. __________________ www.jannettyracing.com Celebrating 39 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com

04-22-2010, 12:30 AM	#41
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	What should this setup put down TVS2300 Pulley Upgrade BAP roto fab Kooks Headers 1 7/8 Kooks catted connection pipes No weeds diverters Ported TB and custom tuning? __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 06:56 PM
Check your Order here	bvonscott	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	665	06-29-2009 02:00 PM
L99 engine specifications	Tran	Wiki	0	10-19-2008 12:40 PM

03-09-2010, 09:10 PM	#30
quinthawk Drives: 2010 camaro ss, 2012 ZL1, 2021 LT1 Join Date: Oct 2009 Location: Iowa Posts: 128	How much power would this package make without the upgraded pulley?

03-10-2010, 02:08 PM	#36
quinthawk Drives: 2010 camaro ss, 2012 ZL1, 2021 LT1 Join Date: Oct 2009 Location: Iowa Posts: 128	What would the power be with 1 7/8 dynatech headers, custom tune and the standard magnuson kit with the 3.8" pulley?