12-28-2019, 09:41 PM | #29 |
Drives: 2018 1SS M6 Join Date: Nov 2014
Location: Houston
Posts: 2,617
|
Not a one. You'll have to do it yourself. I know you don't care about fines, but they sure as hell do. Now, of course, I'm talking about reputable shops. I'm sure there are some places that will take the cash, but will probably leave you with a lot of leaks, and maybe even some rattles by not clearing out the cat completely.
Besides, why not just do it right the first time and throw some long tubes with off road pipes? |
12-29-2019, 07:43 AM | #30 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,862
|
I ran 10.03@139 with factory exhaust including the factory cats on stock motor and just my old 2300 Heartbeat Did not replace those till I built my motor and added long tubes. So the factory exhaust is not that bad. So somewhere along the line I probably Gapped some gutless cats at the track.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
Last edited by laynlo15; 12-29-2019 at 07:53 AM. |
12-29-2019, 10:20 AM | #31 |
Dumb Ass Deluxe
Drives: A Tricked Out Mountain Bike Join Date: Jun 2019
Location: Arizona
Posts: 1,959
|
|
12-29-2019, 11:28 AM | #32 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,862
|
haha
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
12-29-2019, 03:39 PM | #33 | |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,325
|
Quote:
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
|
12-29-2019, 10:58 PM | #34 | |
Drives: 2018 1SS M6 Join Date: Nov 2014
Location: Houston
Posts: 2,617
|
Quote:
Not to mention that the counties in and around the Houston area require emission testing and inspection for registration renewals. |
|
|
|
Post Reply
|
Tags |
abilene, gut cats, houston, texas |
|
|