I need help :( Please - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Blackhawk6 · 12-17-2009, 01:00 PM

Quote:

Originally Posted by ProudLS

Yes I am sure.

That car is not equipped with Onstar of Bluetooth because it was made before that was available...

Build date was 06/16/2009

skuttduck · 12-17-2009, 01:11 PM

Have you tried pressing config, then going to phone (radio controls), and then selecting the device? That is how I have to do it each time for my phone.

The trick is I will not see the bluetooth logo on the radio until I do that.

I can also do it by turning off the bluetooth on the phone, having the car on or acc, and then turning the bluetooth on, on my phone.

It was frustrating as all can be with my phone, but once I figured it out, it is not too bad. I thought for sure it would only get paired once, and then I had to pair it up again, but not the case, I found two ways of doing it.

v6sonoma · 12-17-2009, 01:29 PM

Quote:

Originally Posted by ProudLS

Its 2SS, beside I have paired my phone but it works only for music.

Thats your answer it can't be paired for both. I tried it with my Pre and it removed the phone pairing and replaced it with the music. So if you want to do both think you have to use the USB or line in for it to work.

fastal · 12-17-2009, 01:33 PM

Quote:

Originally Posted by Blackhawk6

That car is not equipped with Onstar of Bluetooth because it was made before that was available...

Build date was 06/16/2009

Something isn't right, Onstar and Bluetooth have been in 2LT and 2SS's since day one.

Quote:

Originally Posted by v6sonoma

Thats your answer it can't be paired for both. I tried it with my Pre and it removed the phone pairing and replaced it with the music. So if you want to do both think you have to use the USB or line in for it to work.

That has to be phone dependent. My G1 is paired for both music and phone. The two bluetooth modules in the car have different identifiers so I have two pairings with my phone.

v6sonoma · 12-17-2009, 01:49 PM

Quote:

Originally Posted by fastal

Something isn't right, Onstar and Bluetooth have been in 2LT and 2SS's since day one.

That has to be phone dependent. My G1 is paired for both music and phone. The two bluetooth modules in the car have different identifiers so I have two pairings with my phone.

probably is phone dependent.

ProudLS · 12-17-2009, 01:50 PM

Quote:

Originally Posted by fastal

Something isn't right, Onstar and Bluetooth have been in 2LT and 2SS's since day one

Now I am confused, how can I be sure?

That has to be phone dependent. My G1 is paired for both music and phone. The two bluetooth modules in the car have different identifiers so I have two pairings with my phone.

Now I am confused, how can I be sure? and is it possible that may car has only one Bluetooth for music only?

v6sonoma · 12-17-2009, 02:01 PM

Quote:

Originally Posted by ProudLS

Now I am confused, how can I be sure? and is it possible that may car has only one Bluetooth for music only?

try pairing again as a phone that will tell you if it works or not. As for the Onstar thing I have no idea why your car lacks it. It is supposed to be in all of them?

PQ · 12-17-2009, 03:01 PM

Quote:

Originally Posted by kjd15

I didn't configure my phone myself, the salesman did it for me, so I didn't pay attention to what he did. Mine works fine for answering calls from the steering wheel button, but I have to read up on how to make it able to make calls. For now, I have to find the phone number on my phone, then when I hit send, it goes through the bluetooth.

Should be pretty user freindly. I did mine without the manual. Plugged the numbers in to the car (manually) and recorded the contact voice name, and now I push the button on the steering wheel and it says 'Ready' and I'll say a comand like, 'Call Bonnie', then it will confirm and I say 'Yes' and it calls.

Just play with it for a while. It takes some time but it's really not too hard.

kjd15 · 12-17-2009, 05:25 PM

Quote:

Originally Posted by PQ

Should be pretty user freindly. I did mine without the manual. Plugged the numbers in to the car (manually) and recorded the contact voice name, and now I push the button on the steering wheel and it says 'Ready' and I'll say a comand like, 'Call Bonnie', then it will confirm and I say 'Yes' and it calls.

Just play with it for a while. It takes some time but it's really not too hard.

K, thanks. I'll try it. It's another excuse to sit in the car and play with things anyway! LOL

PQ · 12-17-2009, 05:51 PM

Quote:

Originally Posted by kjd15

K, thanks. I'll try it. It's another excuse to sit in the car and play with things anyway! LOL

No doubt. That's what I did. I felt like a little kid at Christmas after getting that gift that you KNEW your parents couldn't afford.

ProudLS · 12-17-2009, 06:51 PM

Quote:

Originally Posted by Blackhawk6

That car is not equipped with Onstar of Bluetooth because it was made before that was available...

Build date was 06/16/2009

Blackhawk6 is right, my car is 2SS but does bot have Bluetooth for phone..!!
I do not know why but I will get back to my dealer and ask them

MightyT · 12-18-2009, 01:35 AM

I got a 2LT with RS and by Backberry Storm2 work great with Bluetooth!

YELLOW2SS · 12-18-2009, 05:13 AM

I got my car 5/23/09 and it has bluetooth and onstar, this has been out for years now.

DkknightX · 12-18-2009, 05:19 AM

My Blackberry Curve 8350i sees the bluetooth signal from my car as "General Motors." Once paired, you can press the phone activation button on the steering wheel. Next you'll hear.

"Say a Command."

Reply - "Bluetooth"

"Bluetooth Ready."

Reply - "Voice."

Then say the person's name on your contact list. The voice recognition is actually quite good on my phone and in this car.

12-18-2009, 01:35 AM	#40
MightyT Drives: 2010 Camaro 2LT RS Join Date: Sep 2009 Location: California Posts: 539	I got a 2LT with RS and by Backberry Storm2 work great with Bluetooth! __________________ 2010 Camaro 2LT RS - Rally Yellow Ordered from Tom Bell 1100 Prelim. Order - (09-18-09) 2000 GM Accepted - (09-22-09) Order NPJWCM. 3000 Prod Control Accepted - (10-14-09) *TPW 11/02/09. 3300 Scheduled - (10-26-09)* 3400 Broadcast - (10-31-09) 3800 Produced - (11-06-09) VIN 2G1FC1EV6A9165272 4200 Shipped - (11-09-09) Rail ETTX701486 5000 Deliver dealer - (11-27-09) 6000 Deliver customer - (11-27-09)

12-17-2009, 01:11 PM	#30
skuttduck Drives: 2010 RJT 2LT Camaro Join Date: May 2009 Location: East Lansing, MI Posts: 2,529	Have you tried pressing config, then going to phone (radio controls), and then selecting the device? That is how I have to do it each time for my phone. The trick is I will not see the bluetooth logo on the radio until I do that. I can also do it by turning off the bluetooth on the phone, having the car on or acc, and then turning the bluetooth on, on my phone. It was frustrating as all can be with my phone, but once I figured it out, it is not too bad. I thought for sure it would only get paired once, and then I had to pair it up again, but not the case, I found two ways of doing it.

12-18-2009, 05:13 AM	#41
YELLOW2SS 2010 Camaro 2SS Drives: 2010 2SS yellow black stripes Join Date: Sep 2009 Location: Jeffersonville IN Posts: 148 View My Garage	I got my car 5/23/09 and it has bluetooth and onstar, this has been out for years now.

12-18-2009, 05:19 AM	#42
DkknightX Account Suspended Drives: 2006 Chevrolet Cobalt SS/SC Stage 2 Join Date: Dec 2008 Location: Emerson, NJ Posts: 1,347 View My Garage	My Blackberry Curve 8350i sees the bluetooth signal from my car as "General Motors." Once paired, you can press the phone activation button on the steering wheel. Next you'll hear. "Say a Command." Reply - "Bluetooth" "Bluetooth Ready." Reply - "Voice." Then say the person's name on your contact list. The voice recognition is actually quite good on my phone and in this car.