Header Prices Dropping... - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Rich1 · 12-29-2009, 03:16 PM

I called MarylandSpeed and got a great price for Kooks headers, high-flow cats, and Corsa catback exhaust. The Kooks are going to be jet hot coated. I love the look and the added advantage of lowering the amount of heat in the engine bay.I did my research on prices and Maryland speed beat them all. Brandon is friendly and very knowledgeable. I am very pleased.

2010SSRS · 12-29-2009, 03:49 PM

Quote:

Originally Posted by Rich1

I called MarylandSpeed and got a great price for Kooks headers, high-flow cats, and Corsa catback exhaust. The Kooks are going to be jet hot coated. I love the look and the added advantage of lowering the amount of heat in the engine bay.I did my research on prices and Maryland speed beat them all. Brandon is friendly and very knowledgeable. I am very pleased.

i ordered the same package with the Jett Hot 1700 and Corsa from Brandon. if anyone here is serious about ordering in the next day or so........CALL Brandon.

seriously.....CALL Brandon!

RCPW · 01-01-2010, 08:01 PM

Hey Guys,... Sorry it took me so long to get these pics to you
I finally got off my ass and went outside in the Florida Night & Cold & Drizzle

and took these pics for you guys just Now.

It's actually a lot worse than I thought it was, Check these Nasty Pics Out.

Mr Twisty · 01-01-2010, 08:42 PM

I see rust everywhere, do you drive on the beaches much?

RCPW · 01-01-2010, 08:50 PM

Quote:

Originally Posted by MisterCamaro69

I see rust everywhere, do you drive on the beaches much?

Not at all,...

The Truck Only has 8700 Miles on it.

Do you think it might be the Florida Salty Air?
I only live a few miles from the Gulf of Mexico.

2010SSRS · 01-01-2010, 08:58 PM

Quote:

Originally Posted by RCPW

Not at all,...

The Truck Only has 8700 Miles on it.

Do you think it might be the Florida Salty Air?
I only live a few miles from the Gulf of Mexico.

looks like the not T-304 stainless factor to me!

RCPW · 01-01-2010, 09:00 PM

These are the same Headers Brand New When I got them.

RCPW · 01-01-2010, 09:05 PM

Quote:

Originally Posted by 2010SSRS

looks like the not T-304 stainless factor to me!

These are the 1949S-2 Headers Plus I had them Silver Ceramic Coated on Top of it.

They Should Be!

Jim

BLK2SS · 01-01-2010, 09:29 PM

Wow, thanks for the pics. Those are 409 stainless, it will rust on the surface. Not that it should matter with the coating. Those welds look hideous, no JBA products in my future.

Jeanius · 01-01-2010, 11:38 PM

WOW, can any of the guys who bought the JBA products for the 2010 Camaro chime in?

PieNsky · 01-01-2010, 11:39 PM

Quote:

Originally Posted by RCPW

Hey Guys,...
Check these Nasty Pics Out.

I tried to check them out but all I could find were the pics of the headers

RCPW · 01-02-2010, 01:57 AM

Quote:

Originally Posted by BLK2SS

Wow, thanks for the pics. Those are 409 stainless, it will rust on the surface. Not that it should matter with the coating. Those welds look hideous, no JBA products in my future.

Okay so this amount of Rust is Normal, After all I'm guessing these tubes are probably 1/4" thick or something like that.

Whats wrong with the Welds?

Quote:

Originally Posted by PieNsky

I tried to check them out but all I could find where the pics of the headers

Sorry,...
I uploaded the pics because i had said last week that i would and i never got around to it until just now.

2010SSRS · 01-02-2010, 08:09 AM

Quote:

Originally Posted by RCPW

Okay so this amount of Rust is Normal, After all I'm guessing these tubes are probably 1/4" thick or something like that.

Whats wrong with the Welds?

Sorry,...
I uploaded the pics because i had said last week that i would and i never got around to it until just now.

with non T-304's yes, the rust is normal but your coating's not doing it's job. you may wanna check into the warranty.

look at your welds and then find some pics of ARH and Kooks. you'll see the difference.

i ordered Kooks with Jett Coat 1700............

UsedTaHaveA68 · 01-02-2010, 10:12 AM

Quote:

Originally Posted by 2010SSRS

with non T-304's yes, the rust is normal but your coating's not doing it's job. you may wanna check into the warranty.

look at your welds and then find some pics of ARH and Kooks. you'll see the difference.

i ordered Kooks with Jett Coat 1700............

Yeah but those are TIG welded. Besides, it's not like these are load-bearing structures or anything. As long as the penetration is good and there aren't any holes, it should be ok.

01-01-2010, 08:01 PM	#31
RCPW Drives: 2005 Dodge Dakota Join Date: Nov 2009 Location: Cape Coral, Florida Lets Ride. Posts: 90	Hey Guys,... Sorry it took me so long to get these pics to you I finally got off my ass and went outside in the Florida Night & Cold & Drizzle and took these pics for you guys just Now. It's actually a lot worse than I thought it was, Check these Nasty Pics Out. Attached Images __________________ My Future Car As It Stands Below,... (1100 Order Accepted At Dealer 11.21.09 - 2000 Accepted At GM 11.24.09 - 2500 Preferenced 11.25.09 - 3000 Production Control 12.03.09 Notes: 01/11/2010 Added What ever that means? - 12.17.09 - 3400 Order Broadcast -)

01-01-2010, 08:42 PM	#32
Mr Twisty Drives: the 2nd amendment home Join Date: May 2008 Location: OK Posts: 14,763	I see rust everywhere, do you drive on the beaches much? __________________ "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." -- Benjamin Franklin lib·er·ty /ˈlibərdē/ noun 1. the state of being free within society from oppressive restrictions imposed by authority on one's way of life, behavior, or political views

01-01-2010, 09:00 PM	#35
RCPW Drives: 2005 Dodge Dakota Join Date: Nov 2009 Location: Cape Coral, Florida Lets Ride. Posts: 90	These are the same Headers Brand New When I got them. Attached Images __________________ My Future Car As It Stands Below,... (1100 Order Accepted At Dealer 11.21.09 - 2000 Accepted At GM 11.24.09 - 2500 Preferenced 11.25.09 - 3000 Production Control 12.03.09 Notes: 01/11/2010 Added What ever that means? - 12.17.09 - 3400 Order Broadcast -)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FUEL PRICES DAILY LINK	SQUALO	Canada	8	07-09-2011 12:31 PM
Think about this and the Z28 5th gen	13F20	Camaro ZL1 Forum - ZL1 Specific Topics	41	09-04-2010 01:59 AM
Dynatech's SuperMaxx Long Tube Header Packages On Sale!!!	tbyrne	V8 Bolt-Ons & Tunes	8	01-26-2010 02:31 PM
Dynatech's SuperMaXX Long Tube Header Packages On Sale!	tbyrne	V8 Bolt-Ons & Tunes	28	12-18-2009 09:33 AM

12-29-2009, 03:16 PM	#29
Rich1 Drives: 2023 ZL1 Camaro Hot Red Join Date: Dec 2009 Location: St. Louis Posts: 358	I called MarylandSpeed and got a great price for Kooks headers, high-flow cats, and Corsa catback exhaust. The Kooks are going to be jet hot coated. I love the look and the added advantage of lowering the amount of heat in the engine bay.I did my research on prices and Maryland speed beat them all. Brandon is friendly and very knowledgeable. I am very pleased.

01-01-2010, 09:29 PM	#37
BLK2SS Drives: Black 2SS Join Date: Oct 2009 Location: Westminster, MD Posts: 169	Wow, thanks for the pics. Those are 409 stainless, it will rust on the surface. Not that it should matter with the coating. Those welds look hideous, no JBA products in my future.

01-01-2010, 11:38 PM	#38
Jeanius Drives: Blk/Blk 2018 Sierra SLT Join Date: Dec 2006 Location: Golden State Posts: 2,925	WOW, can any of the guys who bought the JBA products for the 2010 Camaro chime in?