trunk lid vibration - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

martin_2010 · 12-19-2010, 01:41 PM

Quote:

Originally Posted by AUS10BMX

Video I made showing stock rattle.

Im gonna be putting in a Kicker 12" L7 sub....
How much dynamat, and where should i put it without spending to much on the stuff...

are those your stock speakers?? mine never rattled
or do you already have a system in it?

ipimpthisc · 12-19-2010, 01:47 PM

the stocker rattle like hell...i have a custom box with a solo x ...tust me the thing bumps, that rattle kills me...i am thinkin of actually removing the lid all togther ..and making a fiberglass one

AUS10BMX · 12-19-2010, 03:48 PM

Quote:

Originally Posted by martin_2010

are those your stock speakers?? mine never rattled
or do you already have a system in it?

Stock, it says in the video.

Alfieboy · 12-19-2010, 08:26 PM

Quote:

Originally Posted by Captain McFunk

There is one. Look on page 1....

guess Im going blind..

the strip is grey also.. I didnt even see it..

2PitbullSS · 03-01-2011, 12:55 AM

Quote:

Originally Posted by AUS10BMX

Video I made showing stock rattle.

Im gonna be putting in a Kicker 12" L7 sub....
How much dynamat, and where should i put it without spending to much on the stuff...

Anybody figure out an effective way to solve this type of rattle? I'm running a JL 12 W6, and the low volume rattle is really startin to wear on me! I already tried the weatherstrip fix and it helped with trunk rattling on the rear window but the mounting surface of the rear speakers still rattles like a SOB. I have some extra b-quiet deadner from my install, and although im not lookin forward to pulling out the entire rear interior of the car just to access the rear deck, it's lookin like my only option. Has anyone gone this route? I would really like some confirmation that this isn't going to be a huge waste of time. Thanks!

jamaro2011 · 03-01-2011, 05:21 AM

Quote:

Originally Posted by 2PitbullSS

Anybody figure out an effective way to solve this type of rattle? I'm running a JL 12 W6, and the low volume rattle is really startin to wear on me! I already tried the weatherstrip fix and it helped with trunk rattling on the rear window but the mounting surface of the rear speakers still rattles like a SOB. I have some extra b-quiet deadner from my install, and although im not lookin forward to pulling out the entire rear interior of the car just to access the rear deck, it's lookin like my only option. Has anyone gone this route? I would really like some confirmation that this isn't going to be a huge waste of time. Thanks!

2PitbullSS · 03-02-2011, 09:50 AM

All the people on this forum with subs, and absolutely no one has addressed this? Are there people here with subs that don't have this issue? Or are people just living with it?

Slowkray · 03-02-2011, 06:54 PM

Quote:

Originally Posted by AUS10BMX

Video I made showing stock rattle.

Im gonna be putting in a Kicker 12" L7 sub....
How much dynamat, and where should i put it without spending to much on the stuff...

I have addressed this. Mine used to rattle with just my exhaust tone and no music playing at all, this was before I did the sub install. I installed a ******** box a couple of weeks ago and used Fat Mat sound deadner. I was planning on installing the sound deadner even before I decided to do the ******** box. It was alot of work but, I think it was well worth the time and effort. I removed the entire interior up to the front seats / were the carpet begins. I put Fat Mat underneath the rear deck (in the center where the factory retaining clips come through), and on the rear deck on the inside of the car. The stock 6 x 9 speaker housings suck to say the least. They only use one screw to secure them. The other side is just a bracket that slides over the rear "metal" deck. This is the main place you are getting the rattle from. I used some small pieces of Fat Mat on the 6 x 9 brackets were they touched the metal rear deck. I also removed the stock 6 x 9s when I put the Fat Mat down on top of the rear deck. So when I reinstalled the speakers they did not touch metal, they touch Fat Mat. Unfortunatly I did not take pictures of these small details. Here is a picture of the inside of the car when I was almost done installing the Fat Mat. Hope this helps you guys. By the way, after installing the sound deadner, the road noise is dramatically reduced.

crewxp · 03-02-2011, 07:12 PM

Subscribed

Gavros 4 Life · 03-02-2011, 07:29 PM

can we get pics possibly of the weather strip install, and what it looks like with the weather strip on with the trunk lid closed? thanks

2PitbullSS · 03-03-2011, 12:08 AM

Slowkray, thanks for the info! After the fatmat do you get any rattles from the rear deck at all, at any volume?

Slowkray · 03-03-2011, 07:44 AM

Quote:

Originally Posted by 2PitbullSS

Slowkray, thanks for the info! After the fatmat do you get any rattles from the rear deck at all, at any volume?

None at all. It really is a worthwhile addition to your car even if you don't plan on installing a sub IOM.

bigted83 · 03-03-2011, 08:49 AM

Hey everybody I got a free fix to your rattles, here it is.

Turn your radio down

1CAMSS · 03-03-2011, 08:52 AM

Quote:

Originally Posted by bigted83

Hey everybody I got a free fix to your rattles, here it is.

Turn your radio down

Ahhhhh hahahahaha!!!!!!!

03-02-2011, 09:50 AM	#35
2PitbullSS Drives: 2010 Camaro SS & 2003 Z71 w/6" lift Join Date: Jun 2009 Location: New Orleans, La Posts: 87	All the people on this forum with subs, and absolutely no one has addressed this? Are there people here with subs that don't have this issue? Or are people just living with it? __________________ 416ci VVT Stroker built by LETHAL RACING

03-03-2011, 12:08 AM	#39
2PitbullSS Drives: 2010 Camaro SS & 2003 Z71 w/6" lift Join Date: Jun 2009 Location: New Orleans, La Posts: 87	Slowkray, thanks for the info! After the fatmat do you get any rattles from the rear deck at all, at any volume? __________________ 416ci VVT Stroker built by LETHAL RACING

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to remove the cover on the underside of the trunk lid?	spectrepig	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	7	12-23-2009 10:26 AM
Trunk Lid Rattle	Slake	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	4	10-18-2009 03:07 PM
trunk lid issues	nards444	5th Gen Camaro SS LS LT General Discussions	7	09-11-2009 10:00 AM
Gap below trunk lid	scorpio	5th Gen Camaro SS LS LT General Discussions	8	09-24-2008 10:09 AM

12-19-2010, 01:47 PM	#30
ipimpthisc Banned Drives: @twinturbo, cammed, intrcooled@ Join Date: Apr 2009 Location: nyc, EAST COAST HEAVY HITTERS Posts: 739	the stocker rattle like hell...i have a custom box with a solo x ...tust me the thing bumps, that rattle kills me...i am thinkin of actually removing the lid all togther ..and making a fiberglass one

03-02-2011, 07:12 PM	#37
crewxp Drives: 2LT RS Summit White Camaro Join Date: Jan 2011 Location: Texas Posts: 293	Subscribed

03-02-2011, 07:29 PM	#38
Gavros 4 Life Drives: 2SS/RS Summit White Black Stripes Join Date: May 2010 Location: New Jersey Posts: 508	can we get pics possibly of the weather strip install, and what it looks like with the weather strip on with the trunk lid closed? thanks

03-03-2011, 08:49 AM	#41
bigted83 They call me captain slow Drives: 2010 camaro lt Join Date: Jun 2010 Location: Springfield Illinois Posts: 1,241	Hey everybody I got a free fix to your rattles, here it is. Turn your radio down