Boze Injected!!! - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BowTieDrifter · 06-07-2010, 01:06 AM

try the pedders springs. that way if you dont like it, i'm sure you would have no problem selling them to somebody here if you didnt like it.

now i have a question for nineball:
has anyone tried these wheels in 20x10, 20x11? looks like that would work on the same offset as long as you are carefull with tire size and making sure the fenders are rolled nice and flat inside.
i think the stock tires could make that work.
if you guys can have that size built, and powdercoat the face of the wheel gunmetal or black, i'd buy a pair as soon as i get my camaro. loved these wheels from the first time i saw them. just want to make sure i get as much lip as possible!

vr2ss · 06-07-2010, 01:43 AM

i liked the stock alot more..kinda looks like lowrider rims to me but if you like it, enjoy em!!!!

Badger · 06-07-2010, 07:09 AM

Quote:

Originally Posted by youngoliver

they look great on ur ABM as well!
But easy to clean? i hate tht little puddle on the inner rim haha but that doesn't bother me to much... it's hard to clean the inner rim with those big calipers we got as well ha

Youngoliver.....are you running the stock tires on there??

adub · 06-07-2010, 01:52 PM

Quote:

Originally Posted by BowTieDrifter

try the pedders springs. that way if you dont like it, i'm sure you would have no problem selling them to somebody here if you didnt like it.

now i have a question for nineball:
has anyone tried these wheels in 20x10, 20x11? looks like that would work on the same offset as long as you are carefull with tire size and making sure the fenders are rolled nice and flat inside.
i think the stock tires could make that work.
if you guys can have that size built, and powdercoat the face of the wheel gunmetal or black, i'd buy a pair as soon as i get my camaro. loved these wheels from the first time i saw them. just want to make sure i get as much lip as possible!

These wheels in 2 pc are 20x8.5" front and 20x10" rear. The 3 pc wheels can be had in 9" front and 10.5" rear I believe

Nine Ball · 06-07-2010, 11:29 PM

Quote:

Originally Posted by BowTieDrifter

try the pedders springs. that way if you dont like it, i'm sure you would have no problem selling them to somebody here if you didnt like it.

now i have a question for nineball:
has anyone tried these wheels in 20x10, 20x11? looks like that would work on the same offset as long as you are carefull with tire size and making sure the fenders are rolled nice and flat inside.
i think the stock tires could make that work.
if you guys can have that size built, and powdercoat the face of the wheel gunmetal or black, i'd buy a pair as soon as i get my camaro. loved these wheels from the first time i saw them. just want to make sure i get as much lip as possible!

Going wider doesn't mean the lip is deeper. We always offset the wheels to the max so that they do not stick out, so the outer lip is always the same regardless of wheel width. The extra width goes towards the inside (back) of the wheel.

I'm not a fan of 10" or bigger than 275 up front, most of the cars I've seen kinda stick out a little with bigger. Definitely need the Pedders coil-overs to go over 275, otherwise the spring perch hits the tire.

Den4176 · 06-07-2010, 11:31 PM

looks good!!

youngoliver · 06-08-2010, 03:51 PM

Quote:

Originally Posted by Badger

Youngoliver.....are you running the stock tires on there??

yes sir

se7en · 06-09-2010, 12:49 AM

Very nice wheel's! I have some custom's on order and cant wait to see them

06-07-2010, 11:31 PM	#34
Den4176 El Maligno.... Drives: 2ss/rs,'10-E350, E46 328i Join Date: Jun 2009 Location: New York Posts: 263	looks good!! __________________ DIY Pw13 L.E.D. Fog Install

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Redline Motorsports Fuel Injected Car show June 27th!	Redline Motorsports	USA - New England	23	06-27-2010 03:43 PM
My new Boze Speedster wheels!!!	imsuperdave	Wheels and Tires Talk Sponsored by The Tire Rack	18	05-13-2010 11:24 PM
Boze Forged Grip wheels, brushed centers Cyber Grey accent's	Davenport	Wheels and Tires Talk Sponsored by The Tire Rack	18	04-29-2010 10:38 PM
Baer Brakes, Nickle finish with black lettering, Pfadt sport suspension, Boze wheels.	Davenport	Suspension / Brakes / Chassis	5	04-28-2010 04:54 PM
Boze Forged Tach wheels, 20"X9" & 20"X10.5"	Davenport	Wheels / Tires	21	01-22-2010 10:11 PM

06-07-2010, 01:06 AM	#29
BowTieDrifter selling nissan for a 2SS Drives: 95 Nissan 240sx fully drift prepped Join Date: Oct 2009 Location: Temecula, CA Posts: 19	try the pedders springs. that way if you dont like it, i'm sure you would have no problem selling them to somebody here if you didnt like it. now i have a question for nineball: has anyone tried these wheels in 20x10, 20x11? looks like that would work on the same offset as long as you are carefull with tire size and making sure the fenders are rolled nice and flat inside. i think the stock tires could make that work. if you guys can have that size built, and powdercoat the face of the wheel gunmetal or black, i'd buy a pair as soon as i get my camaro. loved these wheels from the first time i saw them. just want to make sure i get as much lip as possible!

06-07-2010, 01:43 AM	#30
vr2ss Banned Drives: 2010 victory red 2ss Join Date: May 2010 Location: Hollywood Posts: 72	i liked the stock alot more..kinda looks like lowrider rims to me but if you like it, enjoy em!!!!

06-09-2010, 12:49 AM	#36
se7en Drives: 10 Procharged SS Join Date: Oct 2009 Location: The creek at the end of the dead end road Posts: 1,857	Very nice wheel's! I have some custom's on order and cant wait to see them