Jacksonville Camaro Club - Page 334 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

fritcherc · 11-09-2011, 03:41 PM

They taste great with fava beans and a nice Chianti.

sarswimmer22 · 11-09-2011, 05:59 PM

Quote:

Originally Posted by woolfman72

nah not hard at all . the hardest part for me was getting the t-tap on the wire for the DRLs there was not alot of room between the plug and the wire wrap. I did not want to have to unwrap any to get to the wire because i figured it would not stay wrapped if i did.

How in the hell do you get the side marker light out so I can get a T-tap into it? Everything else is going smooth.

woolfman72 · 11-09-2011, 08:28 PM

Quote:

Originally Posted by sarswimmer22

How in the hell do you get the side marker light out so I can get a T-tap into it? Everything else is going smooth.

you dont, You turn your wheel away from the side your working on , take the 3 screws out of the wheel well and go in from there . Its a pain in the ass uncomfortable reach but its doable . Just need a flash light so you can see the colors of the wires. Put the t tap partially on the wire and then get a pair of pliers and reach in and snap it shut.

6liter · 11-09-2011, 09:27 PM

Did some photos at Disney Motor Speedway today.

sarswimmer22 · 11-09-2011, 09:56 PM

Quote:

Originally Posted by woolfman72

you dont, You turn your wheel away from the side your working on , take the 3 screws out of the wheel well and go in from there . Its a pain in the ass uncomfortable reach but its doable . Just need a flash light so you can see the colors of the wires. Put the t tap partially on the wire and then get a pair of pliers and reach in and snap it shut.

Thanks again for the help! Hopefully my lights get here tomorrow so I can install them. If not I'm going to go ahead and wire the DRL's and Halo's together.

Codeman1407 · 11-09-2011, 10:12 PM

Quote:

Originally Posted by 6liter

Did some photos at Disney Motor Speedway today.

Just plain Beautiful. Awesome photos man.

steeleshark2 · 11-09-2011, 11:21 PM

Quote:

Originally Posted by 6liter

Did some photos at Disney Motor Speedway today.

Very sweet Chris!!

woolfman72 · 11-10-2011, 06:24 AM

Quote:

Originally Posted by sarswimmer22

Thanks again for the help! Hopefully my lights get here tomorrow so I can install them. If not I'm going to go ahead and wire the DRL's and Halo's together.

I would be careful doing it before you get the LEDs as the stock ones take more power and could cause problems with overloading.

sarswimmer22 · 11-10-2011, 07:32 AM

Quote:

Originally Posted by woolfman72

I would be careful doing it before you get the LEDs as the stock ones take more power and could cause problems with overloading.

I didnt! All I did was take out the three screws and look so when I finally do get my lights I know the layout. Thanks for the tip...makes perfect since!

Camaro_Lover4 · 11-10-2011, 08:05 AM

Quote:

Originally Posted by sarswimmer22

I didnt! All I did was take out the three screws and look so when I finally do get my lights I know the layout. Thanks for the tip...makes perfect since!

search for camaroscotty user id here and he got a youtube video that shows how to do it.

sarswimmer22 · 11-10-2011, 09:17 AM

Quote:

Originally Posted by Camaro_Lover4

search for camaroscotty user id here and he got a youtube video that shows how to do it.

Thank you...

steeleshark2 · 11-10-2011, 10:12 AM

Quote:

Originally Posted by sarswimmer22

Thank you...

If you come by the house, I can help you out.

Devilfish · 11-10-2011, 05:17 PM

Hey Steele where is the Saturday cruise this week?

sarswimmer22 · 11-10-2011, 06:43 PM

So I did it

...I installed and wired my new LED DRL's so they stay on with my headlights! Pic's to follow later.

Thanks guys for the help and offering to meet up and get an extra hand! Thanks!

11-09-2011, 09:27 PM	#4666
6liter Drives: BLK Join Date: Jul 2009 Location: USA Posts: 913 View My Garage	Did some photos at Disney Motor Speedway today. __________________ '10 Camaro 2SS/RS 6spd - Mods: Kenne Bell 2.8, Kooks, Wortec Bi-Modal Exhaust & Big Brake Kit (12piston front), MTI Shifter, BC Racing Coilovers, CCW Thunderbolt, Hotchkis Sway Bars, Carbon Fiber and satin wrap. Thanks to Hartely Automotive for helping with this build.

11-10-2011, 06:43 PM	#4676
sarswimmer22 Drives: 2011 Camaro 2SS RS Join Date: Sep 2011 Location: Jacksonville Florida Posts: 179 View My Garage	DRL's! So I did it ...I installed and wired my new LED DRL's so they stay on with my headlights! Pic's to follow later. Thanks guys for the help and offering to meet up and get an extra hand! Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs!	RPI Designs	Cosmetics and Lighting Modification Discussions	36	04-02-2020 06:32 PM
Gran Turismo 5... No Camaro?	5thGenOwner	5th Gen Camaro SS LS LT General Discussions	111	12-06-2011 11:06 AM
Think about this and the Z28 5th gen	13F20	Camaro ZL1 Forum - ZL1 Specific Topics	41	09-04-2010 01:59 AM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM

11-09-2011, 03:41 PM	#4663
fritcherc Drives: Black 2012 Camaro SS/RS Join Date: Oct 2011 Location: Jacksonville, Florida Posts: 137 View My Garage	They taste great with fava beans and a nice Chianti.

11-10-2011, 05:17 PM	#4675
Devilfish US Navy Chief Drives: Camaro Sold Join Date: Jun 2011 Location: Rotten Groton, CT Posts: 354	Hey Steele where is the Saturday cruise this week?