Add HUD to your 2010 - Page 35 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2SSRS@Gen5diy · 10-21-2010, 07:29 PM

The right part number for them is 11610157

franknbeans · 10-21-2010, 08:44 PM

so you cut the dash with out removing the entire dash, correct?

2SSRS@Gen5diy · 10-21-2010, 09:07 PM

Yes i used a box cuter, All i did was use the stencil and a marker then cut the opening, Then had to clean the windshield from all the marks of my fat hands. LOL

Also got all the connectors for the plug and play part of the harness, Will make the first one in the AM and test it.

franknbeans · 10-21-2010, 09:37 PM

sounds good. Thanks again for all your hard work, like I said, I'll be purchasing the kit from you to support all the work you put into this.

Top Thrill · 10-21-2010, 09:56 PM

It is getting close to the finish line. The anticipation level is rising.

daphatgrant · 10-21-2010, 11:35 PM

Initially I really liked the idea of this but thought it'd be too complicated for me to do, after watching the process so far I think I could handle it. Thanks OP for taking the leap

hoffmk2003 · 10-22-2010, 08:24 AM

Looks like a pretty clean install, save for the part of cutting up the dash, but if you do it neat its as good as factory. i'm glad to see someone doing this, so I'm trying to get caught up here so all the factory wiring is available all you have to do is tap into it?

patrickt · 10-22-2010, 09:10 AM

Quote:

Originally Posted by hoffmk2003

Looks like a pretty clean install, save for the part of cutting up the dash, but if you do it neat its as good as factory. i'm glad to see someone doing this, so I'm trying to get caught up here so all the factory wiring is available all you have to do is tap into it?

That it is Ofer is doing a hell of a job with this retro

2SSRS@Gen5diy · 10-22-2010, 10:21 AM

I made the new harness and will drive with it in place for a day or two, The clips that are needed to hold the HUD in place will be here on Monday And then i will install and get pics up, But still no TRIM, Hay maybe at SEMA I can get one from the new GM's cars. LOL

franknbeans · 10-22-2010, 11:00 AM

by trim, I assume you mean the trim that goes around the HUD display.

patrickt · 10-22-2010, 11:52 AM

Quote:

Originally Posted by franknbeans

by trim, I assume you mean the trim that goes around the HUD display.

correct

camaro4mybday · 10-22-2010, 12:00 PM

ofer are u gonna do a template with purchase of the harness??

2SSRS@Gen5diy · 10-22-2010, 01:48 PM

Quote:

Originally Posted by camaro4mybday

ofer are u gonna do a template with purchase of the harness??

Yes i can.

01pewterz28 · 10-22-2010, 01:51 PM

Quote:

Originally Posted by 2SSRS

Yes i can.

You going to be at SEMA if so I will talk to you about a few items I would like to get from you HUD harness, ABL, ect..

10-21-2010, 08:44 PM	#478
franknbeans Whipped Drives: 2010 CAMARO Join Date: Sep 2008 Location: Pittsburgh-ish - PA Posts: 4,216 View My Garage	so you cut the dash with out removing the entire dash, correct? __________________ Car of the week 7/7/14

10-21-2010, 09:37 PM	#480
franknbeans Whipped Drives: 2010 CAMARO Join Date: Sep 2008 Location: Pittsburgh-ish - PA Posts: 4,216 View My Garage	sounds good. Thanks again for all your hard work, like I said, I'll be purchasing the kit from you to support all the work you put into this. __________________ Car of the week 7/7/14

10-21-2010, 09:56 PM	#481
Top Thrill BOD 5/28/09 #13485 Drives: 2010 Camaro 2LT RS Join Date: Jan 2009 Location: Chesapeake, Virginia Posts: 913	It is getting close to the finish line. The anticipation level is rising. __________________

10-21-2010, 11:35 PM	#482
daphatgrant June '10 Drives: '10 2SS/RS RJT Join Date: Jul 2009 Location: Upstate NY (FingerLakes) Posts: 2,395	Initially I really liked the idea of this but thought it'd be too complicated for me to do, after watching the process so far I think I could handle it. Thanks OP for taking the leap __________________ RJT, 2SS/RS, M6, Black Int, Sunroof. (Click above image to learn about UpstateC5)

10-22-2010, 08:24 AM	#483
hoffmk2003 The Hof Drives: 2010 IOM Camaro 2SS/RS Join Date: Jan 2010 Location: Jamestown, RI Posts: 825	Looks like a pretty clean install, save for the part of cutting up the dash, but if you do it neat its as good as factory. i'm glad to see someone doing this, so I'm trying to get caught up here so all the factory wiring is available all you have to do is tap into it? __________________ #6 Bolt on Fast List...best ET 12.01@117 mph http://www.streetfire.net/video/best...ro_2240734.htm

10-21-2010, 07:29 PM	#477
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	The right part number for them is 11610157

10-21-2010, 09:07 PM	#479
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	Yes i used a box cuter, All i did was use the stencil and a marker then cut the opening, Then had to clean the windshield from all the marks of my fat hands. LOL Also got all the connectors for the plug and play part of the harness, Will make the first one in the AM and test it.

10-22-2010, 10:21 AM	#485
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	I made the new harness and will drive with it in place for a day or two, The clips that are needed to hold the HUD in place will be here on Monday And then i will install and get pics up, But still no TRIM, Hay maybe at SEMA I can get one from the new GM's cars. LOL

10-22-2010, 11:00 AM	#486
franknbeans Whipped Drives: 2010 CAMARO Join Date: Sep 2008 Location: Pittsburgh-ish - PA Posts: 4,216 View My Garage	by trim, I assume you mean the trim that goes around the HUD display. __________________ Car of the week 7/7/14

10-22-2010, 12:00 PM	#488
camaro4mybday "Camaro Joe" Drives: 2010 SILVER ICE 2LT/RS CAMARO Join Date: Feb 2010 Location: long island ny Posts: 2,366	ofer are u gonna do a template with purchase of the harness??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs!	RPI Designs	Cosmetics and Lighting Modification Discussions	36	04-02-2020 06:32 PM
February 2010 Camaro production & sales figures. Tops Mustang for 9th straight month!	Tran	5th Gen Camaro SS LS LT General Discussions	52	03-03-2010 10:39 PM
DEALER ONTARIO CANADA WE SHIP ANYWHERE IN CANADA 2010 CAMAROS FOR SALE IN STOCK NOW!	dz	Dealer Camaros for Sale	0	03-03-2010 06:43 PM
Zex Nitrous System for 2010 Camaro SS @ BMC Performance!	Kris@BMCPerformance	Forced Induction	2	02-18-2010 07:59 PM
2010 Chevrolet Camaro makes finalist list for 2010 World Car Design of the Year	Tran	5th Gen Camaro SS LS LT General Discussions	37	02-17-2010 05:22 PM