Lingenfelter Performance Engineering Customers

[600hp-lpe]

Originally Posted by mws444

I was like the forth person to post up for the morning sesion.....we are talking wild horses coud'nt keep me away from this one. Love the challenge a new track brings. Just hope they dont sneak the sign up past me.

Planning on packing the Mickeys for the strip as well. I guess it will be good to have the mobile shop with me. I will try to get time to get the tools and trailer packed right for the trip. Remember the Brotherhood is always welcome to borrow what ever they need. If you guys might need anything out of the ordinary let me know and I will pack it up.

I do need a few things... Well, more like space for a few things. I have a set of Race tires on wheels or the street set that I need storage for when they are not in use.

I will need to have 2 sets of CCW's at the event -
one set with the street tires. (sending the car with these on it)
one set with the race tires. (still have to figure out how these get out there)

Need a jack and basic hand tools to swap them back and forth.
I am putting my mini air compressor and tire gauge in my car for transport.

Hey Mike, can I ship the race tires/wheels to you ahead of time and have you bring them to the event in the big rig?

[600hp-lpe]

Hi Speed - I Guess you have been busy with the new business.. hope everything is going well with it.

How was the dune buggy ride through the desert when you were out in Vegas? did you guy's go?

[RS-SS2]

Originally Posted by mws444

I was like the forth person to post up for the morning sesion.....we are talking wild horses coud'nt keep me away from this one. Love the challenge a new track brings. Just hope they dont sneak the sign up past me.

Planning on packing the Mickeys for the strip as well. I guess it will be good to have the mobile shop with me. I will try to get time to get the tools and trailer packed right for the trip. Remember the Brotherhood is always welcome to borrow what ever they need. If you guys might need anything out of the ordinary let me know and I will pack it up.

Mike,we would love to hit you up for space as well if you have room. We will be bringing a extra set of wheels and tires each.

Speed, nice to hear from you, hope all is well.

[paul2010]

Hey Mike
I will be sending 4 sets of wheels, two canopies, 4 drums of race fuel, 4 jacks, 2 air compressors and 3 tool boxes. Oh and a few water kegs, 3 coolers and a grill.
Get me your address so I can ship it right out.
Thanks Buddy

[Blue70SS]

Originally Posted by RS-SS2

Mike,we would love to hit you up for space as well if you have room. We will be bringing a extra set of wheels and tires each.

Speed, nice to hear from you, hope all is well.

Well Mike..... looks like a tires n rims trailer
Full extra set of wheels/tires here to if there's still enough room.
Was hoping to do both both events, but looks like a choice has to be made :(

I'm thinking a Lingenfelter Banner may be needed for this rig!

[ravensjeff]

Originally Posted by Blue70SS

9.5x20 fronts, 10.5x20 rears, Pirelli P-zero 275 and 305's till tread gone (soon LOL), changing over to Speed's setup of NT05 and 315 rears. I think Speed did 10s all around though. These P-zeros spin way too easy!

Do you already have the Nitto tires? I have to wait til spring time to get them!! I was wondering if that was why you posted pix of rim without the tires!!

This is what is going on mine-Rims are done, tires not made yet:

Premier Series
S03P 20x10
S03P 20x11
Hidden hardware option
Lightweight hardware
Finish
Inners chrome
Outers chrome
Aluminum center caps with brushed emblems.
TPMS tire sensor brackets

Nitto NT05 Tires
27540ZR20
31535ZR20

[se7en]

Originally Posted by mws444

I cant remember what you dynoed out at.

You coming to the fest? Would love to see you and your car there!

I would love to come, but im not gonna be able to make it. :(

Im waiting for the new dyno sheet now. Before we had some issues, but i should have the new dyno sheet back early next week. My car is at LPE right now and im headed there tomorrow from Detroit to check it out.

Cant wait to see it and the new dyno numbers again!

[600hp-lpe]

Hmm.... Maybe we need to rent a U-Haul truck while we are out there.. not to drive, but to hold everyone's spare tires in....

At $29.95 a day, it's cheap enough for storing all the tires/ misc gear in that we all will have. If it doesn't get driven anywhere other than to and from the track, it will be pretty cheap to rent.

That is a better option than filling Mike's new trailer with 6-7 sets of tires!

[600hp-lpe]

My car goes to the auto body shop this Saturday to get ready for the roll cage project. Woo Hoo!!!

[paul2010]

Originally Posted by 600hp-lpe

Hmm.... Maybe we need to rent a U-Haul truck while we are out there.. not to drive, but to hold everyone's spare tires in....

At $29.95 a day, it's cheap enough for storing all the tires/ misc gear in that we all will have. If it doesn't get driven anywhere other than to and from the track, it will be pretty cheap to rent.

That is a better option than filling Mike's new trailer with 6-7 sets of tires!

What do you mean that thing is 80' long!

LoL I was only kidding about sending all that stuff!!!

[paul2010]

Have you guys seen the GM High Tech list:
http://www.gmhightechperformance.com...ist/index.html

[RS-SS2]

Paul, that is awesome!!!! congrats.


Two LPE cars in the top five, way to go Lingenfelter.

[Blue70SS]

Originally Posted by ravensjeff

Do you already have the Nitto tires? I have to wait til spring time to get them!! I was wondering if that was why you posted pix of rim without the tires!!

This is what is going on mine-Rims are done, tires not made yet:

Premier Series
S03P 20x10
S03P 20x11
Hidden hardware option
Lightweight hardware
Finish
Inners chrome
Outers chrome
Aluminum center caps with brushed emblems.
TPMS tire sensor brackets

Nitto NT05 Tires
27540ZR20
31535ZR20

Nice setup! I'm mounting my Pzeros, wear them out, then NT05s. I still couldn't get any type of NTs - not available, no production start date either.

[Blue70SS]

Originally Posted by 600hp-lpe

Hmm.... Maybe we need to rent a U-Haul truck while we are out there.. not to drive, but to hold everyone's spare tires in....

At $29.95 a day, it's cheap enough for storing all the tires/ misc gear in that we all will have. If it doesn't get driven anywhere other than to and from the track, it will be pretty cheap to rent.

That is a better option than filling Mike's new trailer with 6-7 sets of tires!

Good idea - but shouldn't we fill Mike's trailer completely up and sell raffle tickets to guess the # of tires?

Originally Posted by paul2010

Have you guys seen the GM High Tech list:
http://www.gmhightechperformance.com...ist/index.html

Cool Paul - I like the "only one on drag radials in top 10" remark!