Iowa Members Get In Here! - Page 382 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

OVERPAR73 · 03-17-2013, 05:29 PM

Indy500_SS,
I think JDP is the only way to go, easy install and even has a remote. Stop by and we can have them installed in a couple hours.

maroman52405 · 03-17-2013, 07:44 PM

anyone have placement ideas for front license plate? i do not want to drill a hole in the front end if at all possible.

BenningJ · 03-17-2013, 08:00 PM

Get the JacFab front license plate bracket. No drilling required, it uses 2 existing holes in the bumper. It is a good part.

maroman52405 · 03-17-2013, 08:09 PM

thanks Benning!

its a syn · 03-17-2013, 08:25 PM

Quote:

Originally Posted by maroman52405

anyone have placement ideas for front license plate? i do not want to drill a hole in the front end if at all possible.

They have a remote setup also.

its a syn · 03-17-2013, 08:27 PM

Happy B-Day Tim!!

I'm late

DennisfromIowa · 03-17-2013, 08:30 PM

Quote:

Originally Posted by OVERPAR73

Dennis,
Do you have a list of the upcoming shows or cruises here locally? Hopefully the weather will take a change for the better and I will be able to get the car out of hibernation. As soon as it is nice enough I'm going to have the XPel clear bra put on my car at Willis.
Bill

I don't have anything yet on local events but there is you and Bob in Urbandale and myself and probably a couple more around here that could get together for a cruise / snack/ whatever a little late in the year. What do you think?
Dennis

PS
Indy500_SS is in Fl, left today, so don't be looking for him to get back to you right away.

its a syn · 03-17-2013, 08:39 PM

http://www.aacustomshield.com/

Quote:

Originally Posted by HRD_WRK

I lost the award for most tape.

Saw in one of my mags that I read that Armor All has so spray on protectant. Looks as if you spray on a few layers and peel it off when done. Said it was going to be $15 a can.

xtreme2s · 03-17-2013, 09:24 PM

Quote:

Originally Posted by its a syn

Happy B-Day Tim!!

I'm late

Thanks Bob

NitroBeagle · 03-17-2013, 10:52 PM

Quote:

Originally Posted by maroman52405

thanks Benning!

I have one too. They were $85 I think. I have the shaped one.

nsane · 03-18-2013, 07:45 AM

I'm an idiot. Yesterday I went to the storage garage to uncover the car, let it run for awhile... and sit in it.

Well, I decided it would be cool to drive it around the block. What wasn't cool was listening to every pellet of sand and salt hit the wheel wells. I thought the roads looked a lot more clean. It was fun... dry roads. But they are still extremely dirty.

BenningJ · 03-18-2013, 09:34 AM

Alright guys, here is the picture of my new plates. I like em.

Also, what is the best way to buff out minor scuff marks (clear coat only), I rubbed a box backing out of my sister's garage over the weekend. Most of the scuffs rubbed out with just a towel but a couple were a little more stubborn. I can't get pictures of them as they won't show up well, but I know they are there. Haha. Any thoughts?

toesuf94 · 03-18-2013, 09:40 AM

Love the plate!!

BenningJ · 03-18-2013, 10:22 AM

The thing I like best is that the Iowa License plates are coming out with all black lettering.

Thanks Tim I will give a try. I have used McGuires products on my '76 Camaro and they have given amazing results.

03-17-2013, 05:29 PM	#5335
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,472 View My Garage	Indy500_SS, I think JDP is the only way to go, easy install and even has a remote. Stop by and we can have them installed in a couple hours. __________________ Build Thread: 2018 ZL1 Vert Purchased (Overpar73)

03-17-2013, 08:00 PM	#5337
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	Get the JacFab front license plate bracket. No drilling required, it uses 2 existing holes in the bumper. It is a good part. __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

03-17-2013, 08:27 PM	#5340
its a syn B.O.D. 02/16/10 Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010 Location: Albia,Iowa Posts: 3,959 View My Garage	Happy B-Day Tim!! I'm late __________________

03-18-2013, 07:45 AM	#5345
nsane Drives: 2013 Camaro zl1 Join Date: Sep 2012 Location: Iowa Posts: 64 View My Garage	I'm an idiot. Yesterday I went to the storage garage to uncover the car, let it run for awhile... and sit in it. Well, I decided it would be cool to drive it around the block. What wasn't cool was listening to every pellet of sand and salt hit the wheel wells. I thought the roads looked a lot more clean. It was fun... dry roads. But they are still extremely dirty. __________________ Iowa Nice

03-18-2013, 09:34 AM	#5346
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	New Plates installed Alright guys, here is the picture of my new plates. I like em. Also, what is the best way to buff out minor scuff marks (clear coat only), I rubbed a box backing out of my sister's garage over the weekend. Most of the scuffs rubbed out with just a towel but a couple were a little more stubborn. I can't get pictures of them as they won't show up well, but I know they are there. Haha. Any thoughts? Attached Images __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

03-17-2013, 07:44 PM	#5336
maroman52405 Drives: 2013 AGM 2LT/RS Join Date: Dec 2012 Location: cedar rapids iowa Posts: 46 View My Garage	anyone have placement ideas for front license plate? i do not want to drill a hole in the front end if at all possible.

03-17-2013, 08:09 PM	#5338
maroman52405 Drives: 2013 AGM 2LT/RS Join Date: Dec 2012 Location: cedar rapids iowa Posts: 46 View My Garage	thanks Benning!

03-18-2013, 09:40 AM	#5347
toesuf94 Drives: THR #11 E-force supercharged Join Date: Jul 2008 Location: Cedar Rapids, IA Posts: 4,746	Love the plate!! __________________ Cars and women are both going to give you problems...but you can pay somebody else to fix your car!

03-18-2013, 10:22 AM	#5348
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	The thing I like best is that the Iowa License plates are coming out with all black lettering. Thanks Tim I will give a try. I have used McGuires products on my '76 Camaro and they have given amazing results. __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Properautocare Coupon Sale for Camaro5 Members	Angelo@Autopia	Wash/Wax/Detailing and Cosmetic Maintenance Parts	2	12-11-2009 10:38 AM
STS Turbo - Exclusive Offer for Camaro 5 Members - Ends Oct 10th!!!	ZZcamaro	Forced Induction	64	10-19-2009 01:16 PM
Messages to more than 5 members & Social Groups	heinzd01	Site Related Announcements / Suggestions / Feedback / Questions	5	09-16-2009 09:22 AM