Pur Performance install of my maggy, COG, rotofab intake - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

*radz28* · 01-07-2011, 10:14 AM

Quote:

Originally Posted by purperformance

The ls3 cover isnt on there, I understand the pics would tell you otherwise, we have done a bunch of these. The tech installed the cover and immediately realised his mistake, the car would not be performing nearly how it does if it was not oiling half the lifters. Simple mistake, unfortunetaly he was taking pics as we do for all of our customers and posted some of the error on our website. No worries, should be deleting the dod here shortly anyhow. You guys are right in advising him to look into it, as potential damage could occur if a car is run in that state. Hopefully we will be becoming a sponsor here if I can find the time and post progress on another 2010 we are building, upwards of 1100hp at the tires through a 4L80.

PQ · 01-07-2011, 10:31 AM

Quote:

Originally Posted by purperformance

The ls3 cover isnt on there, I understand the pics would tell you otherwise, we have done a bunch of these. The tech installed the cover and immediately realised his mistake, the car would not be performing nearly how it does if it was not oiling half the lifters. Simple mistake, unfortunetaly he was taking pics as we do for all of our customers and posted some of the error on our website. No worries, should be deleting the dod here shortly anyhow. You guys are right in advising him to look into it, as potential damage could occur if a car is run in that state. Hopefully we will be becoming a sponsor here if I can find the time and post progress on another 2010 we are building, upwards of 1100hp at the tires through a 4L80.

Awesome. Thanks for the explaination.
I've done that too.

I'd take a picture and then decide to change something (stripes etc.....) and forget when I took the pic.

Good job. I thought something was odd for sure because of his numbers and the way it seems to be running.

Quote:

Originally Posted by radz28

*GTAHVIT* · 01-07-2011, 10:38 AM

Very cool.

Glad to hear all is well.

metallicide · 01-07-2011, 11:57 AM

He beat me too it. Ben is the man...lol. Now if the snow would get outa here I could drive it again!

PQ · 01-07-2011, 12:03 PM

Quote:

Originally Posted by metallicide

He beat me too it. Ben is the man...lol. Now if the snow would get outa here I could drive it again!

Glad it was nothin'

Didn't mean to pry but I was just trying to look out.

Snow? We don't have it.

metallicide · 01-07-2011, 12:16 PM

Quote:

Originally Posted by PQ

Glad it was nothin'

Didn't mean to pry but I was just trying to look out.

Snow? We don't have it.

Lucky! Gotta drive the 03 f150...wife took our jeep wrangler rubicon to work :/.....not sure if this truck will handle any better than the car, tires are reallllly bald.

Jessika · 01-07-2011, 12:17 PM

Quote:

Originally Posted by purperformance

The ls3 cover isnt on there, I understand the pics would tell you otherwise, we have done a bunch of these. The tech installed the cover and immediately realised his mistake, the car would not be performing nearly how it does if it was not oiling half the lifters. Simple mistake, unfortunetaly he was taking pics as we do for all of our customers and posted some of the error on our website. No worries, should be deleting the dod here shortly anyhow. You guys are right in advising him to look into it, as potential damage could occur if a car is run in that state. Hopefully we will be becoming a sponsor here if I can find the time and post progress on another 2010 we are building, upwards of 1100hp at the tires through a 4L80.

+1 Awesome news!!

Quote:

Originally Posted by metallicide

He beat me too it. Ben is the man...lol. Now if the snow would get outa here I could drive it again!

Yea, we don't have that stuff either...

metallicide · 01-07-2011, 01:59 PM

Quote:

Originally Posted by Jessika@Magnacharger

+1 Awesome news!!

Yea, we don't have that stuff either...

I might be jealous.....just a little

01-07-2011, 10:38 AM	#45
GTAHVIT Blessed Drives: 2013 Sonic RS MT Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,441 View My Garage	Very cool. Glad to hear all is well. __________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

01-07-2011, 11:57 AM	#46
metallicide Drives: 2010 Camaro 2SS Join Date: Jul 2010 Location: Illinois Posts: 398	He beat me too it. Ben is the man...lol. Now if the snow would get outa here I could drive it again! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 06:56 PM
ADM PERFORMANCE DOES CUSTOM AEROFORCE INTERCEPTOR INSTALL ON CAMARO	ADM PERFORMANCE	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	50	08-06-2016 01:11 PM
Hawk Performance Brake Pad "Updated"	KILLER74Z28	Suspension / Brakes / Chassis	34	05-04-2016 12:11 PM
4th Annual GM Performance Parts LSX Shootout!!	nmcajeff	Dragstrip and Launch Techniques Discussion	3	07-30-2010 01:05 PM