To Clear Bra or not to Clear Bra my 2011 Camaro SS - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

hot ss · 02-15-2011, 10:56 PM

do it....

Camaro8810 · 02-20-2011, 09:56 AM

Peace of mind is well worth the cost. Do it and you will not regret it.

Bond · 02-20-2011, 01:02 PM

I didn't know you could wax these things! I was just using Quick Detailer on 'em! Great to know!!

Atlas · 02-20-2011, 01:57 PM

I clear bra'd my entire front bumper. Including the Headlights and "Fog" lights. I even installed my vinyl stripe kit on top of it. You don't even notice it's there. If you look closely, you can see the seams where the clear bra is cut to form. I paid $500 locally for 3M certified installation and warranty. Do it

The best pic I have at the moment.

IBM/2SS/RS/LS3 · 02-20-2011, 02:34 PM

Quote:

Originally Posted by GC-Camaro

Can some one post pictures of a Clear Bra after 6 years and 60,000 miles? I know most people like it, but I don't know anyone who has had theirs more than a year or two.

How about over 6 years and 120,000+ miles later??

Here ya' go!!

shortstop4 · 02-20-2011, 03:11 PM

My clear bra quandry..

I am going to get a clear bra put on, BUT I have matte black rally stripes, matte black vinyl mail slot and matte black gill vinyl inserts. (Photos Below)

I am mulling several options and need some advice

1) Clear bra front bumper and have them cut around the mail slot, do nothing to the hood and nothing to the gills

2) Clear bra the whole front bumper including mail slot, clear bra over the gills and clear bra just the stripes on the hood and trunk so the black looks glossy on the whole car

3) Do the front bumper cut around the mail slot, do nothing to the hood and clear bra over the gills. The gills will be glossy black with the hood and mail slot still matte black

Decisions are tough

, any first hand advice is appreciated.

Atlas · 02-20-2011, 03:31 PM

Quote:

Originally Posted by shortstop4

My clear bra quandry...
1) Clear bra front bumper and have them cut around the mail slot, do nothing to the hood and nothing to the gills

This is what I would do. 3M clear bra's are cut from CAD files available to the installer from their supplier. So they would have to cut special pieces for your hood stripes. Your mail slot is already covered by a vinyl, providing some protection from damage to that area. If your mail slot vinyl does get damaged by road debris, you can always replace that vinyl. Also, get the side mirrors done and the areas in the quarter panels and rockers adjacent to your tires. These Pirelli's love to pick up everything and fling it at your paint.

Personally, I would be worried about the headlights and fog lights. Seeing as their more sensitive to damage, money wise. Whatever you decide be sure to post it up! I'm sure there will be more people in your position wondering the same thing

shortstop4 · 02-20-2011, 03:53 PM

Quote:

Originally Posted by Atlas

This is what I would do. 3M clear bra's are cut from CAD files available to the installer from their supplier. So they would have to cut special pieces for your hood stripes. Your mail slot is already covered by a vinyl, providing some protection from damage to that area. If your mail slot vinyl does get damaged by road debris, you can always replace that vinyl. Also, get the side mirrors done and the areas in the quarter panels and rockers adjacent to your tires. These Pirelli's love to pick up everything and fling it at your paint.

Personally, I would be worried about the headlights and fog lights. Seeing as their more sensitive to damage, money wise. Whatever you decide be sure to post it up! I'm sure there will be more people in your position wondering the same thing

One of the installers locally uses Xpel, and on their site they have precut film for the stripes. Check out the link below, its the last kit at the bottom.

http://www.xpel.com/products/paint_p...5&submodel=204

ToolFan66 · 03-06-2011, 09:57 AM

I say do the gills!!!! Find a few 2010 camaros and look at the gill area and you will change your mind FAST..

I had the full bumper wrapped,up the hood 8",Mailslot,Head Lights,Fog Light's. I also had them do behind all 4 tires and wheels as well as the Gill areas..

A good shop can and will trim around your Black Gills. Don't not do it!!!

Hetfield03 · 05-11-2011, 12:08 AM

Can anyone recommend a good installer in Louisville Ky?

Macfolk · 02-13-2012, 09:15 PM

Quote:

Originally Posted by doublefatty

IMO it's a worthwhile investment. I did full bumper, 1/4 frt fenders, 1/4 hood, rockers, gills, and mirrors. I also put on 1/4 flares (mud guards).

Where did you have it done? I am in Sarasota myself.

Thanks,

Jason

02-15-2011, 10:56 PM	#43
hot ss Drives: aqua 2ss l99 Join Date: Jun 2009 Location: Edmonton Posts: 1,215	do it.... __________________ May your exhaust note, sing in harmony with your blower.

02-20-2011, 09:56 AM	#44
Camaro8810 Drives: Black 2010 2LT RS Join Date: Jul 2010 Location: Southern NJ Posts: 565 View My Garage	Peace of mind is well worth the cost. Do it and you will not regret it. __________________ Mods: CAI Inc. Cold Air Intake, 35% Tint, 3M Clear Bra

02-20-2011, 01:02 PM	#45
Bond Heritage Hanger Drives: 2010 Camaro 2SS/RS, Black. Join Date: May 2009 Location: Edmonton Alberta Posts: 1,152	I didn't know you could wax these things! I was just using Quick Detailer on 'em! Great to know!! __________________ Keeping The Spirit Alive!

02-20-2011, 01:57 PM	#46
Atlas Would you kindly... Drives: Destitute Join Date: Aug 2010 Location: Clovis CA Posts: 748	I clear bra'd my entire front bumper. Including the Headlights and "Fog" lights. I even installed my vinyl stripe kit on top of it. You don't even notice it's there. If you look closely, you can see the seams where the clear bra is cut to form. I paid $500 locally for 3M certified installation and warranty. Do it The best pic I have at the moment. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro Product Manager - interview	Moose	5th Gen Camaro SS LS LT General Discussions	11	04-04-2012 06:10 PM
GM unveils Jay Leno Camaro, Camaro Synergy, Camaro Chroma, Camaro Dusk at SEMA	irocnroll	5th Gen Camaro SS LS LT General Discussions	101	02-27-2012 12:25 PM
Camaro Convertible is Official 2011 Indianapolis 500 Pace Car	01pewterz28	Camaro Convertible Forum	177	04-08-2011 01:10 PM
Modern Camaro Performance - Lowest Prices Anywhere!	PartsTaxi.com	Sponsor Announcements / Giveaways / Contests	0	11-03-2010 10:50 AM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM

02-20-2011, 03:11 PM	#48
shortstop4 Drives: '13 Summit White ZL1 M6 Join Date: Dec 2010 Location: Georgia Posts: 235 View My Garage	My clear bra quandry.. I am going to get a clear bra put on, BUT I have matte black rally stripes, matte black vinyl mail slot and matte black gill vinyl inserts. (Photos Below) I am mulling several options and need some advice 1) Clear bra front bumper and have them cut around the mail slot, do nothing to the hood and nothing to the gills 2) Clear bra the whole front bumper including mail slot, clear bra over the gills and clear bra just the stripes on the hood and trunk so the black looks glossy on the whole car 3) Do the front bumper cut around the mail slot, do nothing to the hood and clear bra over the gills. The gills will be glossy black with the hood and mail slot still matte black Decisions are tough , any first hand advice is appreciated.

03-06-2011, 09:57 AM	#51
ToolFan66 Drives: 2011 2SS 6.2L W/RS package Join Date: Jan 2011 Location: Colorado Posts: 3,008	I say do the gills!!!! Find a few 2010 camaros and look at the gill area and you will change your mind FAST.. I had the full bumper wrapped,up the hood 8",Mailslot,Head Lights,Fog Light's. I also had them do behind all 4 tires and wheels as well as the Gill areas.. A good shop can and will trim around your Black Gills. Don't not do it!!!

05-11-2011, 12:08 AM	#52
Hetfield03 Drives: 2010 2LT/RS Black/IOM Join Date: Feb 2011 Location: Kentucky Posts: 1,539	Can anyone recommend a good installer in Louisville Ky?