Texas Speed 304 Stainless Long Tubes Installed & Dyno Tested w/Pics! - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RedRyder · 05-12-2011, 03:21 PM

These seem to look/sound/perform very well. I have a question though, without cats does it smell terribly gassy if you know what I mean?

Jon@Texas-Speed · 05-12-2011, 05:25 PM

On most stock vehicles it's not bad at all. A lot of people don't even notice it. It really becomes noticeable when you put a cam in the car and increase the overlap. You will smell the raw exhaust smell. Cats typically clean that smell up.

Jon

MikeOD · 05-12-2011, 05:41 PM

Quote:

Originally Posted by MikeOD

Can you add a second bung and threaded plug for it in an extension pipe somewhere for me to put a wideband O2 sensor in when I'm tuning? I've scratched more exhaust tips and lost more of those sensor mount clamp things from tailpipes during full throttle blasts when tuning than I care to admit. I really only need it on 1 side (either, doesn't matter to me), but I could see other people wanting it on both as well.

Also, can you take a picture of the inside of a collector, I'm almost ready to click purchase on your website, just hoping to see a little more before I do.

I think you missed my post.

Jon@Texas-Speed · 05-12-2011, 05:50 PM

I'll see what I can do on the collector pics.

On the 2nd bung, we already have them boxed and ready to go. Your best bet would be to maybe have your local exhaust shop weld a bung in for you so you can use your wideband.

Jon

adub · 05-15-2011, 07:29 PM

Installed my set on Sat. Took just over 2 hrs working by myself on jackstands. 2010 is rediculously easy compared to 4th gen.

Jason 98 TA · 05-18-2011, 09:48 AM

Agreed it is pretty easy!

Now get to that dyno!!!

RedRyder · 05-18-2011, 11:26 AM

Just ordered a set with off road pipes! I'll be getting it dyno tuned so I'll post my results when I do

ssmike · 05-21-2011, 07:59 AM

Quote:

Originally Posted by RedRyder

Just ordered a set with off road pipes! I'll be getting it dyno tuned so I'll post my results when I do

Jason 98 TA · 05-23-2011, 10:03 AM

I also have another dyno sheet I'll try to get up today for you guys.

RedRyder · 05-23-2011, 01:01 PM

Quote:

Originally Posted by Jason 98 TA

I also have another dyno sheet I'll try to get up today for you guys.

rjdapilmoto · 05-23-2011, 01:50 PM

Quote:

Originally Posted by RedRyder

This may just be my next mod after I get the Borla ATAK cat back installed next week...

ssmike · 05-24-2011, 08:04 PM

shadow09 · 05-24-2011, 09:02 PM

have any video of the headers with a stock exhaust? just so I can get a general idea of how much louder it makes the exhaust note. thanks!

faSSt · 05-24-2011, 09:33 PM

Quote:

Originally Posted by shadow09

have any video of the headers with a stock exhaust? just so I can get a general idea of how much louder it makes the exhaust note. thanks!

05-15-2011, 07:29 PM	#47
adub Drives: Shopping Join Date: Feb 2010 Location: Houston Posts: 145	Installed my set on Sat. Took just over 2 hrs working by myself on jackstands. 2010 is rediculously easy compared to 4th gen. __________________ ______________________ 2010 2SS RS Auto - Black 1970 Chevelle SS 396

05-24-2011, 09:02 PM	#55
shadow09 H-Town Camaro Club Drives: 2013 1LE Join Date: Apr 2009 Location: Pearland, Texas Posts: 957	have any video of the headers with a stock exhaust? just so I can get a general idea of how much louder it makes the exhaust note. thanks! __________________ Black 2013 1LE - Bolt ons - Heads - Cam- Suspension - Built by Jrod - Sorian Tuned

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OK...I'm starting a better V6 exhaust examples thread!!	KMPrenger	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	612	09-06-2024 09:00 AM
Texas Speed Long Tubes & Rumbler 5 Cat-Back Dyno Results!	Trevor @ Texas Speed	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	48	12-08-2018 03:37 AM
Sneak Peek Texas Speed 1 7/8" Stainless Long Tubes!!	Jason 98 TA	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	36	12-19-2009 02:13 PM
Stainless Works Long Tube Headers and Exhausts - FREE...	tbyrne	V8 Bolt-Ons & Tunes	1	09-15-2009 09:39 AM
2010 Camaro LS-3 On Engine Dyno @ Texas Speed	Jason 98 TA	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	9	08-21-2009 10:51 AM

05-12-2011, 03:21 PM	#43
RedRyder Drives: 2010 VR 2SS/RS M6 Camaro Join Date: Feb 2010 Location: Atlanta, GA Posts: 499 View My Garage	These seem to look/sound/perform very well. I have a question though, without cats does it smell terribly gassy if you know what I mean?

05-12-2011, 05:25 PM	#44
Jon@Texas-Speed Drives: 01 SS Camaro / 07 Silverado Join Date: May 2009 Location: Lubbock, TX Posts: 197	On most stock vehicles it's not bad at all. A lot of people don't even notice it. It really becomes noticeable when you put a cam in the car and increase the overlap. You will smell the raw exhaust smell. Cats typically clean that smell up. Jon

05-12-2011, 05:50 PM	#46
Jon@Texas-Speed Drives: 01 SS Camaro / 07 Silverado Join Date: May 2009 Location: Lubbock, TX Posts: 197	I'll see what I can do on the collector pics. On the 2nd bung, we already have them boxed and ready to go. Your best bet would be to maybe have your local exhaust shop weld a bung in for you so you can use your wideband. Jon

05-18-2011, 09:48 AM	#48
Jason 98 TA Drives: Camaro Join Date: Apr 2009 Location: Texas Posts: 1,670	Agreed it is pretty easy! Now get to that dyno!!!

05-18-2011, 11:26 AM	#49
RedRyder Drives: 2010 VR 2SS/RS M6 Camaro Join Date: Feb 2010 Location: Atlanta, GA Posts: 499 View My Garage	Just ordered a set with off road pipes! I'll be getting it dyno tuned so I'll post my results when I do

05-23-2011, 10:03 AM	#51
Jason 98 TA Drives: Camaro Join Date: Apr 2009 Location: Texas Posts: 1,670	I also have another dyno sheet I'll try to get up today for you guys.

05-24-2011, 08:04 PM	#54
ssmike BL1ZZRD Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009 Location: Buffalo, NY Posts: 7,841