Can this or will this end the clay bar? - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BaldCamaroStud · 04-24-2012, 05:14 PM

Soo... Flex would be out I assume?

Zman12 · 04-24-2012, 05:29 PM

Quote:

Originally Posted by GaBoy25

LOVE you ride

Thanks! If I can get rid of some swirls I will love it more

Zman12 · 04-24-2012, 05:31 PM

Quote:

Originally Posted by XQIZT

Why would you have to buy 3 clay bars? A 200gram clay bar from Adam's is more than capable of claying 10-15 cars...at least. Unless is it SUPER trashed, or you drop the clay on the ground. Break the clay bar into 3 or 4 pieces and you're good to go.

I must be use to a lot smaller clay bar. Last I got was from Zanio
and I don't think it was bigger than just for one car. Maybe I wasn't using each piece long enough. But I cut into about 8 small pieces and threw away after a few panels and glass. I will be getting Adams this time around.

fargomike · 04-24-2012, 05:33 PM

So this is basically using the rubber pad to more or less grind off particles on the vehicle . As clay is just taking off the top layer of any grit on the car and not pulling it out of the paint . I would want to see more reviews but I would not use this if I was just going to clay an area and wax . You would have to polish as well imo . And on my black vehicles I will stick with clay .

Coop · 04-25-2012, 09:56 AM

Very interested in this. Probably will buy today.

DetailersDomain · 04-25-2012, 09:58 AM

we should have them in stock ready to ship in another 2 hours.

IneedAZ · 04-25-2012, 10:33 AM

Just thought i would ask if any camaro5 discounts available?

DetailersDomain · 04-25-2012, 10:43 AM

sure thing CAMARO is the discount code for 10% off

IneedAZ · 04-25-2012, 10:51 AM

Great Thank you...placing order now!!

DetailersDomain · 04-25-2012, 10:53 AM

thanks shipment just got in so we are good to go now.

IneedAZ · 04-25-2012, 11:04 AM

i put in the CAMARO and it shows, but the total did not change. Is that normal?

nevermind, i see the discount in Paypal

DetailersDomain · 04-25-2012, 12:42 PM

i believe the code took

nebchevy · 04-26-2012, 12:53 AM

Soooooo.... can you use this by hand on only with a power tool...

DetailersDomain · 04-26-2012, 10:55 AM

we have the 3 inch kit which you can use by hand you can always use the 6 inch and to it by hand.

we should have the towels in soon as well.

04-24-2012, 05:33 PM	#46
fargomike The Dude Abides Drives: Black 2SS M6 Join Date: Apr 2010 Location: Fargo , ND Posts: 489	So this is basically using the rubber pad to more or less grind off particles on the vehicle . As clay is just taking off the top layer of any grit on the car and not pulling it out of the paint . I would want to see more reviews but I would not use this if I was just going to clay an area and wax . You would have to polish as well imo . And on my black vehicles I will stick with clay . __________________ 2010 Black 2SS/LS3/M6 Kooks 1 7/8 Ceramic Coated Headers, Borla ATAK CB , JRE Tune , Halltech Yellow Jacket CAI ,VMax Ported TB, PFADT Coilovers,Forgestar CF5's Textured Gunmetal w/Nitto Invo's 275/315 ,Hurst Billet Plus 2 Shifter AAC P13W Plasma LEDw/DRL Harness ,30% Tinting,

04-25-2012, 09:56 AM	#47
Coop Drives: 2010 Camaro 1SS Join Date: Aug 2009 Location: Lawton/Fort Sill, OK Posts: 1,632	Very interested in this. Probably will buy today. __________________ 2010 Camaro 1SS Inferno Orange Magnusson Supercharger Installed and Tuned by ADM Performance, Roto Fab CAI IOM painted, MBRP Cat Back Exhaust, Barton Industries Short Shifter, Clear Image Headers, Pedders coilovers, BMR Front/Rear sway bars Trailing Arms and End Links, VMax ported TB

04-25-2012, 10:33 AM	#49
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,111 View My Garage	Just thought i would ask if any camaro5 discounts available? __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

04-25-2012, 10:51 AM	#51
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,111 View My Garage	Great Thank you...placing order now!! __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

04-25-2012, 11:04 AM	#53
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,111 View My Garage	i put in the CAMARO and it shows, but the total did not change. Is that normal? nevermind, i see the discount in Paypal __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

04-24-2012, 05:14 PM	#43
BaldCamaroStud Camaro Owner & Enthusiast Drives: 2013 Camaro 2SS/RS Join Date: May 2011 Location: Houston, TX Posts: 463 View My Garage	Soo... Flex would be out I assume?

04-25-2012, 09:58 AM	#48
DetailersDomain Drives: Audi S4 Join Date: Jul 2010 Location: NJ Posts: 760	we should have them in stock ready to ship in another 2 hours.

04-25-2012, 10:43 AM	#50
DetailersDomain Drives: Audi S4 Join Date: Jul 2010 Location: NJ Posts: 760	sure thing CAMARO is the discount code for 10% off

04-25-2012, 10:53 AM	#52
DetailersDomain Drives: Audi S4 Join Date: Jul 2010 Location: NJ Posts: 760	thanks shipment just got in so we are good to go now.

04-25-2012, 12:42 PM	#54
DetailersDomain Drives: Audi S4 Join Date: Jul 2010 Location: NJ Posts: 760	i believe the code took

04-26-2012, 12:53 AM	#55
nebchevy Drives: 2011 2SS SGM Camaro Join Date: Aug 2011 Location: Blair Nebraska Posts: 623	Soooooo.... can you use this by hand on only with a power tool...

04-26-2012, 10:55 AM	#56
DetailersDomain Drives: Audi S4 Join Date: Jul 2010 Location: NJ Posts: 760	we have the 3 inch kit which you can use by hand you can always use the 6 inch and to it by hand. we should have the towels in soon as well.