You are browsing camaro5 
 |
|
07-02-2012, 05:31 PM
|
#43 |
 
Drives: Trailblazer SS Join Date: Dec 2010
Location: Dayton, OH
Posts: 186
|
I'm actually very surprised after an installed pic was posted, that these are still here.
|
|
|
|
07-02-2012, 08:58 PM
|
#44 |
 
|
Carbon Fiber Rear Valance Install
Ok everyone. Here are some shots of the install. Went real smooth like I said. First one is of course with a naked rear end.
 Thanks go out to Soundplus for the video on how to remove rear bumper cover. Next is layed out on the floor upside down. If you look close you can see everything that needs to come off to get the valance off. A bunch of plastic. This is part of the plastic reinforcement under the bumper removed. Very self explanatory to remove. Next is the valance it self that is held on with these clips. You can just push them out with your fingers. Screw Driver is just a pointer in this shot. They run all the way across like 6 on each side. Very easy to remove. Once the valance is off this is what you have. Took me about 15 Minutes to get to this part.
__________________
2010 2SS/RS RJT, ADM CAI, Borla Shorties, Borla "S" Cat Back, Edelbrock E-Force Supercharger, GMS Wires, GMS Rear Trailing Arms, GMS Rotors, GMS End Links, GMS Tunnel Brace, GMS Rear Tie Rods, GMS 1G Suspension Package, GMS Stage 3 CNC ported heads, GMS Spec'd R12 Custom Ground Camshaft, Snow Meth Injection, GMS Custom Tuned, Norris Catch Can, MTI Brake Lines, Pfadt Coilovers, Sway Bars, Camber Kit, and Rear LCA Reinforcement, , AAC Footwell, Trunk, DRL and Dome LED Lighting, Technostalgia Tail Lights, RED B/A Pedals, Kompression Custom Wheels with Nitto tires, 621RWHP/584RWTQ
|
|
|
|
|
07-02-2012, 09:16 PM
|
#45 |
|
|
Carbon Fiber Rear Valance Install II
Next was to get the new valance lined up for the mounting and drilling of holes. Hardest part right here.
Here are the mounting studs in the valance. Copper looking all thread. All I did was lay it on top and mark the studs where they rested on the bumper cover. Here are some holes and marks in sharpie. Screw holes at end of valance line up with mounting clips on bumper cover so no drilling there. One thing I did do was elongate my mounting holes though. This allowed me to make minor adjustments to get it perfectlly centered once it was on. Then I tightened it down with provided hardware. Then just put everything back together and cover your rear. Very easy to do. Thanks Forcefed for this one off. For anyone getting one of the other two colors just PM me if you need help. I can talk you through it easily. By the way went to Supercar Sunday last week and it got lots of looks and questions. Then when I told them it was a one off the answer was always "what a shame".
__________________
2010 2SS/RS RJT, ADM CAI, Borla Shorties, Borla "S" Cat Back, Edelbrock E-Force Supercharger, GMS Wires, GMS Rear Trailing Arms, GMS Rotors, GMS End Links, GMS Tunnel Brace, GMS Rear Tie Rods, GMS 1G Suspension Package, GMS Stage 3 CNC ported heads, GMS Spec'd R12 Custom Ground Camshaft, Snow Meth Injection, GMS Custom Tuned, Norris Catch Can, MTI Brake Lines, Pfadt Coilovers, Sway Bars, Camber Kit, and Rear LCA Reinforcement, , AAC Footwell, Trunk, DRL and Dome LED Lighting, Technostalgia Tail Lights, RED B/A Pedals, Kompression Custom Wheels with Nitto tires, 621RWHP/584RWTQ
|
|
|
|
|
07-03-2012, 01:45 PM
|
#46 |
|
Drives: Trailblazer SS Join Date: Dec 2010
Location: Dayton, OH
Posts: 186
|
Thanks for the install pics and instructions Tom, I'm sure these will help out the new owners.
|
|
|
|
|
07-06-2012, 01:27 PM
|
#47 |
|
Drives: Trailblazer SS Join Date: Dec 2010
Location: Dayton, OH
Posts: 186
|
Back on up for payday.
|
|
|
|
|
07-09-2012, 08:17 AM
|
#48 |
|
Drives: Trailblazer SS Join Date: Dec 2010
Location: Dayton, OH
Posts: 186
|
Hope everyone had a good, long, holiday weekend...now let's get these last two balances sold. I will help a bit with shipping if this gets these moved along.
|
|
|
|
|
07-10-2012, 08:04 AM
|
#49 |
|
Drives: Trailblazer SS Join Date: Dec 2010
Location: Dayton, OH
Posts: 186
|
Back on up....as I stated, I will assist with shipping cost to move these out.
|
|
|
|
|
07-11-2012, 09:20 AM
|
#50 |
|
Drives: Trailblazer SS Join Date: Dec 2010
Location: Dayton, OH
Posts: 186
|
Back on up this morning.
|
|
|
|
|
07-12-2012, 09:16 AM
|
#51 |
|
Drives: Trailblazer SS Join Date: Dec 2010
Location: Dayton, OH
Posts: 186
|
Ttt...
|
|
|
|
|
07-12-2012, 10:39 AM
|
#52 |
|
Drives: Trailblazer SS Join Date: Dec 2010
Location: Dayton, OH
Posts: 186
|
Sorry, didn't realize I bumped today...didn't show on my phone.
|
|
|
|
|
07-13-2012, 03:11 PM
|
#53 |
|
Drives: Trailblazer SS Join Date: Dec 2010
Location: Dayton, OH
Posts: 186
|
Payday bump.
|
|
|
|
|
07-13-2012, 05:00 PM
|
#54 |
       
Drives: 2017 1SS 1LE - Hyper Blue, P85DL Join Date: Jul 2011
Location: East Bay
Posts: 2,189
|
Just wanted to pop back in to let you know that I'm still very interested. It just comes down to when I can justify the expenditure.
Either way another bump for a beautiful item. |
|
|
|
|
07-14-2012, 01:15 PM
|
#55 |
|
Drives: Trailblazer SS Join Date: Dec 2010
Location: Dayton, OH
Posts: 186
|
Weekend bump.
|
|
|
|
|
07-16-2012, 08:26 AM
|
#56 |
|
Drives: Trailblazer SS Join Date: Dec 2010
Location: Dayton, OH
Posts: 186
|
New week bump, I'd really like to move these out.
|
|
|
|
|
|
|
|
 |
|
|
