First Time Installing 3M Clear Bra - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

viper1cobra · 08-24-2009, 10:12 PM

I live in a large city in Texas, and I could not find one company that would help me do the job, since I had my own film.

I wish the market was better here but it is not, otherwise I would not have even tried it. Thankyou HTP Autoworks for your excellent advice.

viper1cobra · 09-08-2009, 02:59 PM

Finally, here are the pictures of the A-Pillars and Roof Completed.

ffrcobra_65 · 09-08-2009, 03:52 PM

Nice job! You are getting good at this!

viper1cobra · 09-08-2009, 06:30 PM

Thanks.

I wanted to do the best I could, for never doing it before, it turned out Good.

At least the front of the car will be protected from rocks and bugs now.

fee5fofum · 09-09-2009, 03:27 AM

Here's my Clear Bra on my Camaro

**** WARNING LOTS OF PICTURES***

This was my " TOP and MOST IMPORTANT MOD " i had to do to my Camaro before all other " MODS " were added on to the car (actually the gills were done first

)..
I had the upper and lower fasica done including the fog & headlights , signal lamps , side mirrors , front and rear wheel opening , rocker panels and door sills done ...

The cost was $900 ..

Some pictures were taken right after the install and some were just recent..

viper1cobra · 09-09-2009, 01:22 PM

Turned out great. Thanks for sharing your pictures.

chrisinlittlerock · 09-09-2009, 01:29 PM

Very nice, good job.

htp autoworks · 09-10-2009, 07:23 AM

Viper1, the only issue I see so far is that your edges are already getting dirt underneath them. They need to be heat sealed when you get done installing the film. I use a heat gun and a hard card to seal them down. A hairdryer will work... and is actually recommended if you dont have any experience with a heat gun... but you need to seal them up or you will have black lines around the film from where dirt is collecting underneath.

viper1cobra · 09-10-2009, 04:13 PM

Quote:

Originally Posted by htp autoworks

Viper1, the only issue I see so far is that your edges are already getting dirt underneath them. They need to be heat sealed when you get done installing the film. I use a heat gun and a hard card to seal them down. A hairdryer will work... and is actually recommended if you dont have any experience with a heat gun... but you need to seal them up or you will have black lines around the film from where dirt is collecting underneath.

Thanks for the info, how would I go about doing it know?

If you have any suggestions on how to do this it would be appreciated. Thanks for lending us your experience.

Redlands Clear Auto Bra · 10-07-2009, 04:42 PM

We can install a clear bra on your Camaro for only $600. We use only the best film on the market (VentureShield) and the new Avery Nano-Fusion.
Were located in Redlands, Calif.(near Riverside)
Give us a call at (951) 333-7647
Check out our web page at www.redlandsclearautobra.com

Thanks
REDLANDS CLEAR AUTO BRA

Redlands Clear Auto Bra · 10-09-2009, 07:29 PM

We just put a Clear Auto Bra Anthony's sweet SS Camaro.
Check it out.

REDLDANDS CLEAR AUTO BRA

Redlands Clear Auto Bra · 12-02-2009, 02:33 PM

TAKE $25.00 OF THE PRICE IN THE MONTH OF DECEMBER AT REDLANDS CLEAR AUTO BRA (951) 333-7647

robertway · 12-03-2009, 12:05 AM

Quote:

Originally Posted by Redlands Clear Auto Bra

TAKE $25.00 OF THE PRICE IN THE MONTH OF DECEMBER AT REDLANDS CLEAR AUTO BRA (951) 333-7647

Redlands Clear Auto Bra · 07-08-2011, 05:03 PM

If your driving a new Camaro get a Clear Bra for it at only $550.00
We will use the Avery Nano-Fusion film.
You will Love it.

Redlands Clear Auto Bra

08-24-2009, 10:12 PM	#43
viper1cobra Member Club Elite #131 Drives: 2017 50th Anniversary H50 2SS Join Date: May 2009 Location: Far West TEXAS Posts: 1,729 View My Garage	I live in a large city in Texas, and I could not find one company that would help me do the job, since I had my own film. I wish the market was better here but it is not, otherwise I would not have even tried it. Thankyou HTP Autoworks for your excellent advice. __________________

09-08-2009, 02:59 PM	#44
viper1cobra Member Club Elite #131 Drives: 2017 50th Anniversary H50 2SS Join Date: May 2009 Location: Far West TEXAS Posts: 1,729 View My Garage	Finally, here are the pictures of the A-Pillars and Roof Completed. Attached Images __________________

09-08-2009, 06:30 PM	#46
viper1cobra Member Club Elite #131 Drives: 2017 50th Anniversary H50 2SS Join Date: May 2009 Location: Far West TEXAS Posts: 1,729 View My Garage	Thanks. I wanted to do the best I could, for never doing it before, it turned out Good. At least the front of the car will be protected from rocks and bugs now. __________________

09-09-2009, 03:27 AM	#47
fee5fofum Drives: 2012 CTS-V Coupe & 2SS/RS Join Date: May 2009 Location: U.S.A. Posts: 374	Here's my Clear Bra on my Camaro ** WARNING LOTS OF PICTURES* This was my " TOP and MOST IMPORTANT MOD " i had to do to my Camaro before all other " MODS " were added on to the car (actually the gills were done first).. I had the upper and lower fasica done including the fog & headlights , signal lamps , side mirrors , front and rear wheel opening , rocker panels and door sills done ... The cost was $900 .. Some pictures were taken right after the install and some were just recent.. Attached Images Last edited by fee5fofum; 03-30-2010 at 11:53 PM.

09-09-2009, 01:22 PM	#48
viper1cobra Member Club Elite #131 Drives: 2017 50th Anniversary H50 2SS Join Date: May 2009 Location: Far West TEXAS Posts: 1,729 View My Garage	Turned out great. Thanks for sharing your pictures. __________________

09-08-2009, 03:52 PM	#45
ffrcobra_65 Account Suspended Drives: SuperCharged 2SS/RS IOM MN6 Join Date: May 2009 Location: CA Posts: 5,094	Nice job! You are getting good at this!

09-09-2009, 01:29 PM	#49
chrisinlittlerock Drives: 2010 Camaro/08 Tundra Join Date: Feb 2009 Location: Little Rock Arkansas Posts: 797	Very nice, good job. __________________ Rally Yellow 2SS/RS with Custom painted Black Rally Stripes, Heritage grill, Corsa cat backs with x pipe, CAI. Delivered: 8/18/09!!!!Yes!!!! "This is CHEVY country. On a quiet night you can hear a Ford rust."

09-10-2009, 07:23 AM	#50
htp autoworks Account Suspended Drives: 2007 Jeep SRT-8 Join Date: Jun 2009 Location: DFW Posts: 507	Viper1, the only issue I see so far is that your edges are already getting dirt underneath them. They need to be heat sealed when you get done installing the film. I use a heat gun and a hard card to seal them down. A hairdryer will work... and is actually recommended if you dont have any experience with a heat gun... but you need to seal them up or you will have black lines around the film from where dirt is collecting underneath.

10-07-2009, 04:42 PM	#52
Redlands Clear Auto Bra Drives: Stock Join Date: Oct 2009 Location: Redlands, Calif. Posts: 17	Clear Bra on your new Camaro We can install a clear bra on your Camaro for only $600. We use only the best film on the market (VentureShield) and the new Avery Nano-Fusion. Were located in Redlands, Calif.(near Riverside) Give us a call at (951) 333-7647 Check out our web page at www.redlandsclearautobra.com Thanks REDLANDS CLEAR AUTO BRA Attached Images Last edited by Redlands Clear Auto Bra; 09-08-2010 at 12:21 PM. Reason: Adding web page

10-09-2009, 07:29 PM	#53
Redlands Clear Auto Bra Drives: Stock Join Date: Oct 2009 Location: Redlands, Calif. Posts: 17	Just did Anthony's SS Camaro (sweet car) We just put a Clear Auto Bra Anthony's sweet SS Camaro. Check it out. REDLDANDS CLEAR AUTO BRA Attached Images

12-02-2009, 02:33 PM	#54
Redlands Clear Auto Bra Drives: Stock Join Date: Oct 2009 Location: Redlands, Calif. Posts: 17	Take $25.00 off in the month of December. TAKE $25.00 OF THE PRICE IN THE MONTH OF DECEMBER AT REDLANDS CLEAR AUTO BRA (951) 333-7647

07-08-2011, 05:03 PM	#56
Redlands Clear Auto Bra Drives: Stock Join Date: Oct 2009 Location: Redlands, Calif. Posts: 17	If your driving a new Camaro get a Clear Bra for it at only $550.00 We will use the Avery Nano-Fusion film. You will Love it. Redlands Clear Auto Bra

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clear Bra. Don't go to Tint-King	rays	USA - New England	20	04-01-2010 01:46 PM
3m clear bra $	FAF	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	41	10-09-2009 07:35 PM
Clear bra before or after stripes applied?	tcslc	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	9	07-05-2009 12:35 AM
New Ring Time for ZR1: 7:22.4	DGthe3	General Automotive + Other Cars Discussion	23	10-30-2008 04:28 AM
Time Problem? Maybe?	TAG UR IT	Site Related Announcements / Suggestions / Feedback / Questions	9	08-30-2007 04:53 AM