08-18-2009, 06:19 AM | #43 |
Drives: 2010 Chevy Camaro 2SS RS SIM Join Date: Jun 2009
Location: McKinney, TX
Posts: 470
|
Just throw some dirt and water in the trunk, cut a hole in the trunk lid, and grow some daisies, roses, and mums. Then that spoiler will have served it's purpose. WTH
Ok, maybe we're all laying in a little too hard. Surprise us with your finished artwork cause I'm not seeing it. Picaso? Rembrandt? Andy Worhol? I'm not seeing it yet.
__________________
2010 Camaro 2SS RS 6M SIM - GFX, Sunroof, Carbon Fiber Dash Kit, ARH Headers, ADM Intake, ADM tune, NLP Dove Tail
Last edited by 2L8IWON; 08-18-2009 at 06:36 AM. |
08-18-2009, 06:34 AM | #44 |
Drives: 2010 Chevy Camaro 2SS RS SIM Join Date: Jun 2009
Location: McKinney, TX
Posts: 470
|
Actually, after I went back and took a 2nd look, it's not horrible! Maybe after the grill is in, the rear ground skirt is on, and all the parts are painted, I think the car will still be a head turner. That last pick though shows the spoiler too far out the back, too round and too pointy in the middle. Again, I'm curious to see the results of your creation, but am already on order for the GM GFX. If you're gonna tear apart the new SS and change it up, you have to be able to accept some scrutinizing and ridiculing here.
__________________
2010 Camaro 2SS RS 6M SIM - GFX, Sunroof, Carbon Fiber Dash Kit, ARH Headers, ADM Intake, ADM tune, NLP Dove Tail
|
08-18-2009, 06:35 AM | #45 |
2018 Garnet Red ZL1 conve
Drives: 2013 & 2018 ZL1 vert Join Date: May 2009
Location: Des Moines, IA
Posts: 1,471
|
Missed the mark on design completely!
Sorry guys but you really missed the mark on the design aspects of these parts. Start Over!
Where is the rear wing type spoiler mod? |
08-18-2009, 06:36 AM | #46 |
HOMER
Drives: 2010 camaro 2LT RS SIM Join Date: May 2009
Location: New York
Posts: 527
|
glad to see honesty here, that stuff is butt ugly..
__________________
....do it yourself and be proud when you brag about your mods...
|
08-18-2009, 07:10 AM | #47 |
ZEUSS
|
Not feeling the spoiler, looks a bit too fat and the hood looks like a ricer. however the front chin spoiler is ok. But to each his own. Lets see how the finished product will look all painted up....
|
08-18-2009, 07:26 AM | #48 |
Camarofanatic
Drives: 1969 SS, 1998 RS, 2010 VR 2SS/RS Join Date: Sep 2008
Location: Gallitzin PA
Posts: 1,433
|
|
08-18-2009, 08:17 AM | #49 |
Drives: everyone crazy... Join Date: May 2009
Location: SW Florida
Posts: 2,109
|
That spoiler is way off to outside. You need something like ZR1 with CB.
|
08-18-2009, 08:45 AM | #50 |
Drives: oldskool72/2010camaro Join Date: Jun 2009
Location: El Chuco,Texas
Posts: 21
|
dont like the work at all!!!!!!!!!
__________________
|
08-18-2009, 08:47 AM | #51 |
Drives: 2010 Camaro SS/RS IBM Join Date: Jul 2009
Location: USA
Posts: 347
|
im all for a functional hood scoop, but just not this one. What im really looking for are hideaway headlights as an option that is the only thing i really want to change about my car when i get it. Now before i get flamed about that mod covering up the halos, this is just my opinion. I just like the further retro look of the hideaways i always wished i could have a 69 with modern comforts that the new one has. just my .02
|
08-18-2009, 09:27 AM | #52 |
Camaro & Stang Enthusiast
Drives: 2011 Mustang 5.0 in Kona Blue Join Date: Mar 2008
Location: Miami
Posts: 4,752
|
__________________
Bought my Camaro from Eric Hall(817) 421-7266
|
08-18-2009, 09:36 AM | #53 |
400HP used to be enough..
Drives: 2010 2SS rs manual Join Date: Aug 2009
Location: Central NC
Posts: 772
|
I know a lot of aftermarket designs are "hit or miss", but I'll say this one is definately a miss. They'll probably sell just as many of these as the Lingenfelter special edition Corvettes...
|
08-18-2009, 09:56 AM | #54 |
Account Suspended
Drives: 67, 69, 99 +2010 Join Date: Oct 2008
Location: SoCal
Posts: 602
|
Hard to judge an unfinished product...
BUT..... not feeling it... and why did it get Home Page props? The hood reminds me of the HUGE Nostrils that the Trans Am WS6 came with... |
08-18-2009, 10:32 AM | #55 |
Drives: 2010 1SS/RS Yellow w/stripes Join Date: Jul 2009
Location: St. Paul
Posts: 28
|
I think some of the Mods make the Camaro look to bulbous. Personally I'm more of a fan of the original concept model. I would love to see a company offer modifications that look closer to that original design both interior and exterior. It was more sleek, sharper lines and was a bit wider and lower than the production model. If anyone knows of anyone who is trying to attempt this, let me know. I'm trying to get my car as close as I possibly can to the original model.
|
08-18-2009, 11:47 AM | #56 |
woohoo
Drives: Silverado, 70cutlass, 57chevy&more Join Date: Apr 2009
Location: Socal
Posts: 558
|
I cant say I like the hood and spoiler. Makes it look like should have a honda emblem on it or something. the front bumper looks pretty cool though.
__________________
I am not useless, I can still be used as a bad example!
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Camaro Product Manager - interview | Moose | 5th Gen Camaro SS LS LT General Discussions | 11 | 04-04-2012 06:10 PM |
Lingenfelter 2010 Camaro Engine Packages Including New Vehicle Now Available | Tim@Lingenfelter | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 6 | 06-18-2010 07:11 AM |
GM memo to dealers | Moose | 5th Gen Camaro SS LS LT General Discussions | 41 | 02-04-2010 07:33 PM |
Official Camaro Convertible CONCEPT Press Release | Tran | Camaro Convertible Forum | 12 | 11-18-2009 07:05 PM |
Lingenfelter 2010 LS3 Camaro SS Chassis Dyno Stock | Crowley | Camaro Photos | Spyshots | Video | Media Gallery | 5 | 06-23-2009 01:56 PM |